參考文獻 |
參考文獻
[1] Y. P. Kuo, H. H. Hsieh, N. S. Pai, and C. L. Kuo, “The application of CMAC-based fall detection in Omni-directional mobile robot,” in Proc. IEEE Conf. Advanced Robotics and Intelligent Systems, May 2013, pp. 64-69.
[2] C. H. Lin, M. K. Lin, R. C. Wu, and S. Y. Huang, “Integral backstepping control for a PMSM drive using adaptive FNN uncertainty observer,” in Proc. IEEE Conf. Industrial Electronics, May 2012, pp. 668-673.
[3] L. Yi and P. Yonghong, “Application of fuzzy neural network in the speed control system of induction motor,” in Proc. IEEE Conf. Computer Science and Automation Engineering, Jun. 2011, pp. 673-677.
[4] Nest, https://www.nest.com.tw/。
[5] HITACHI, http://www.hitachi.com.tw/。
[6] R. Ortega and M. W. Spong, “Adaptive motion control of rigid robots: Atutorial,” in Proc. IEEE Conf. Decision Control, 1988, pp. 1575–1584.
[7] K. J. Astrom and B. Wittenmark, Adaptive Control. New York: Addison-Wesley, 1995.
[8] J. J. E. Slotine and W. Li, Applied Nonlinear Control. Englewood Cliffs, NJ: Prentice-Hall, 1991.
[9] R. Johansson, “Adaptive control of robot manipulator motion,” IEEE Trans. Robot. Automat., vol. 6, no. 4, pp. 483–490, Aug. 1990.
[10] C. Y. Su and T. P. Leung, “A sliding mode controller with bound estimation for robot manipulators,” IEEE Trans. Robot. Automat., vol. 9, no. 2, pp. 208–214, Apr. 1993.
[11] J. Imura, T. Sugie, and T. Yoshikawa, “Adaptive robust control of robot manipulators-theory and experiment,” IEEE Trans. Robot. Automat., vol. 10, no. 5, pp. 705–710, Oct. 1994.
[12] M. Teshnehlab and K. Watanabe, “Self tuning of computed torque gains by using neural networks with flexible structures,” Proc. Inst. Elect. Eng. Control Theory Appl., vol. 141, no. 4, pp. 235–242, Jul. 1994.
[13] F. J. Lin, Y. S. Lin, and S. L. Chiu, “Slider-crank mechanism control using adaptive computed torque technique,” Proc. Inst. Elect. Eng. Control Theory Appl., vol. 145, no. 3, pp. 364–376, May 1998.
[14] L. X. Wang, A course in fuzzy systems and control. Prentice-Hall, 1996.
[15] S. Cong and Y. Liang, “PID-like neural network nonlinear adaptive
control for uncertain multivariable motion control systems,” IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 3872–3879, Oct. 2009.
[16] K. Kiguchi and T. Fukuda, “Intelligent position/force controller for industrial robot manipulators-application of fuzzy neural networks,” IEEE Trans. Syst., Man, and Cybern., vol. 34, no. 1, pp. 309–324, Dec. 2004.
[17] F. J. Lin and P. H. Shen, “Robust fuzzy neural network sliding-mode control for two-axis motion control system,” IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1209–1225, Jun. 2006.
[18] F. J. Lin, P. H. Shieh, and P. H. Chou, “Robust adaptive backstepping motion control of linear ultrasonic motors using fuzzy neural network,” IEEE Trans. Fuzzy Syst., vol. 16, no. 3, pp. 676–692, Jun. 2008.
[19] A. Gajate, R. E. Haber, P. I. Vega, and J. R. Alique, “A transductive neuro fuzzy controller: Application to a drilling process,” IEEE Trans. Neural Netw., vol. 21, no. 7, pp. 1158–1167, Jul. 2010.
[20] C. S. Chen, “Supervisory interval type-2 TSK neural fuzzy network control for linear microstepping motor drives with uncertainty observer,” IEEE Trans. Power Electron., vol. 26, no. 7, pp. 2049–2064, Jul. 2011.
[21] R. J. Wai and L. C. Shih, “Adaptive fuzzy-neural-network design for voltage tracking control of a dc-dc boost converter,” IEEE Trans. Power Electron., vol. 27, no. 4, pp. 2104–2115, Apr. 2012.
[22] W. T. Miller, “Sensor-based control of robotic manipulators using a general learning algorithm,” IEEE. J. Robot and Autom., vol. 3, no. 2, pp. 157-165, Apr. 1987.
[23] S. C. Huang and B. H. Chen, “Highly accurate moving object detection in variable bit rate video-based traffic monitoring systems,” IEEE Trans. Neural Netw. and Learning Syst., vol. 24, no. 12, pp. 1920–1931, Dec. 2013.
[24] D. Xu, Y. Huang, M. Tan, and H. Su, “Adding active learning to LWR for Ping-Pong playing robot”, IEEE Trans. Control Syst. Technol., vol. 21, no. 4, pp. 1489–1494, Jul. 2013.
[25] Q. Ding, J. Tang, and J. Liu, “Application of new FCMAC neural network in power system marginal price forecasting,” in Proc. IEEE Conf. Power Engineering, Nov. 2005, pp. 1-5.
[26] F. J. Lin and R. J. Wai, “Hybrid control using recurrent fuzzy neural network for linear-induction motor servo drive,” IEEE Trans. Fuzzy Syst., vol. 9, no. 1, pp. 102–¬115, Feb. 2001.
[27] C. M. Wen and M. Y. Cheng, “Development of a recurrent fuzzy CMAC with adjustable input space quantization and self-tuning learning rate for control of a dual-axis piezoelectric actuated micromotion stage,” IEEE Trans. Ind. Electron., vol. 60, no. 11, pp. 5105–¬5115, Nov. 2013.
[28] R. J. Oentaryo, M. Pasquier, and C. Quek, “RFCMAC: A novel reduced localized neuro-fuzzy system approach to knowledge extraction,” Expert Syst. with Appl., vol. 38, no. 10, pp. 12066-12084, Sep. 2011.
[29] J. C. Salmon and B. W. Williams, “A split-wound induction motor design to improve the reliability of PWM inverter drives,” IEEE Trans. Ind. Appl., vol. 26, no. 1, pp. 143–150, Jan./Feb. 1990.
[30] R. O. C. Lyra and T. A. Lipo, “Torque density improvement in a six-phase induction motor with third harmonic current injection,” IEEE Trans. Ind. Appl., vol. 38, no. 5, pp. 1351–1360, Sep./Oct. 2002.
[31] H. Zhang, A. von Jouanne, S. Dai, A. K. Wallace, and F. Wang, “Multilevel inverter modulation schemes to eliminate common-mode voltages,” IEEE Trans. Ind. Appl., vol. 36, no. 6, pp. 1645–1653, Nov./Dec. 2000.
[32] Y. Izumikawa, K. Yubai, and J. Hirai, “Fault-tolerant control system of flexible arm for sensor fault by using reaction force observer,” IEEE/ASME Trans. Mechatron., vol. 10, no. 4, pp. 391–396, Aug. 2005.
[33] R. Kianinezhad, B. Nahid-Mobarakeh, L. Baghli, F. Betin, and G. A. Capolino, “Modeling and control of six-phase symmetrical induction machine under fault condition due to open phases,” IEEE Trans. Ind. Appl., vol. 55, no. 5, pp. 1966–1977, May 2008.
[34] M. A. Fnaiech, F. Betin, G. A. Capolino and F. Fnaiech, “Fuzzy logic and sliding-mode controls applied to six-phase induction machine with open phases,” IEEE Trans. Ind. Appl., vol. 57, no. 1, pp. 354–364, Jan. 2010.
[35] M. E. H. Benbouzid, D. Diallo, and M. Zeraoulia, “Advanced fault-tolerant control of induction-motor drives for EV/HEV traction applications: From conventional to modern and intelligent control techniques,” IEEE Trans. Veh. Technol., vol. 56, no. 2, pp. 519–528, Mar. 2007.
[36] TMS320F28335, TMS320F28334, TMS320F28332, TMS320F28235, TMS320F28234, TMS320F28232 Digital Signal Controllers (DSCs) Data Manual, Texas Instruments, Jun. 2007.
[37] 蔡孟庭,“智慧型錯誤容忍控制六相永磁同步馬達驅動系統之開發”,碩士論文,中央大學電機系,民國一百零一年。
[38] 許尚文,“六相永磁式同步電動機之設計與控制”,碩士論文,台灣科技大學電機系,民國九十五年。
[39] 王俊超,“六相永磁式同步電動機驅動器之分析與設計”,碩士論文,台灣科技大學電機系,民國九十四年。
[40] 吳泰廷,“六相永磁式同步電動機驅動系統之故障後控制策略”,碩士論文,台灣科技大學電機系,民國九十八年。
[41] M. A. Shamsi-Nejad, B. Nahid-Mobarakeh, S. Pierfederici, and F. Meibody-Tabar, “Fault tolerant and minimum loss control of double-star synchronous machines under open phase conditions,” IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1956–¬1965, May 2008.
[42] F. J. Lin, Y. C. Hung, and M. T. Tsai, “Fault-tolerant control for six-phase PMSM drive system via intelligent complementary sliding-mode control using TSKFNN-AMF,” IEEE Trans. Ind. Electron., vol. 60, no. 12, pp. 5747–¬5762, Dec. 2013.
[43] F. J. Lin, Y. C. Hung, J. C. Hwang, and M. T. Tsai, “Fault-tolerant control of a six-phase motor drive system using a Takagi–Sugeno–Kang type fuzzy neural network with asymmetric membership function,” IEEE Trans. Power Electron., vol. 28, no. 7, pp. 3557–3572, Jul. 2013.
[44] S. Cong and Y. Liang, “PID-like neural network nonlinear adaptive control for uncertain multivariable motion control systems,” IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 3872–3879, Oct. 2009.
[45] Y. Wong and A. Sideris, “Learning convergence in the cerebellar model articulation controller,” IEEE Trans. Neural Netw., vol. 3, no. 1, pp.115–121, Jan. 1992.
[46] K. Kiguchi and T. Fukuda, “Intelligent position/force controller for industrial robot manipulators-application of fuzzy neural networks,” IEEE Trans. Syst., Man, and Cybern., vol. 34, no. 1, pp.309–324, Dec. 2004.
[47] F. J. Lin and P. H. Shen, “Robust fuzzy neural network sliding-mode control for two-axis motion control system,” IEEE Trans. Ind. Electron., vol. 53, no. 4, pp. 1209–1225, Jun. 2006.
[48] F. J. Lin, P. H. Shieh, and P. H. Chou, “Robust adaptive backstepping motion control of linear ultrasonic motors using fuzzy neural network,” IEEE Trans. Fuzzy Syst., vol. 16, no. 3, pp. 676–692, Jun. 2008.
[49] A. Gajate, R. E. Haber, P. I. Vega, and J. R. Alique, “A transductive neuro fuzzy controller: Application to a drilling process,” IEEE Trans. Neural Netw., vol. 21, no. 7, pp. 1158–1167, Jul. 2010.
[50] C. S. Chen, “Supervisory interval type-2 TSK neural fuzzy network control for linear microstepping motor drives with uncertainty observer,” IEEE Trans. Power Electron., vol. 26, no. 7, pp. 2049–2064, Jul. 2011.
[51] R. J. Wai and L. C. Shih, “Adaptive fuzzy-neural-network design for voltage tracking control of a dc-dc boost converter,” IEEE Trans. Power Electron., vol. 27, no. 4, pp. 2104–2115, Apr. 2012.
[52] S. Wang and A. Wu, “Fuzzy cerebellar model articulation controller (FCMAC) for vibration control on ocean engineering vehicles,” in Proc. IEEE Conf. Natural Computation, Aug. 2010, pp. 297-302.
[53] C. Lin, R. Xu, C. Kwan, and L. Haynes, “Submarine pitch and depth control using FCMAC neural networks,” in Proc. IEEE Conf. American Control, Jun. 1998, pp.379-383.
[54] S. Wang, “Fuzzy Cerebellar Model Articulation Controller (FCMAC) for Vibration Control of Semi-Active Suspension System,” in Proc. IEEE Conf. Artificial Reality and Telexistence--Workshops, Dec. 2006, pp.224-227.
[55] J. S. Albus, “Data storage in the cerebellar model articulation controller (CMAC),” Trans. ASME, J. Dyn. Syst. Meas. Control, vol. 97, no. 3, pp. 228–233, Sep. 1975.
[56] J. S. Albus, “A new approach to manipulator control: The cerebellar model articulation controller (CMAC),” Trans. ASME, J. Dyn. Syst. Meas. Control, vol. 97, no. 3, pp. 220–227, Sep. 1975.
[57] 劉君舫,“小腦模型控制器(CMAC)學習方法之研究”,碩士論文,台灣科技大學電機研究所,民國九十三年。
[58] B. K. Bose, Modern power electronics and AC drives. Prentice Hall, 2001.
[59] 王進德,『類神經網路與模糊控制理論入門與應用』,台北市,全華科技圖書股份有限公司,2008年。
[60] T. H. Liu, J. R. Fu, and T. A. Lipo, “A strategy for improving reliability of field-oriented controlled induction motor drives,” IEEE Trans. Ind. Appl., vol. 29, no. 5, pp. 910–918, Sep./Oct. 1993.
|