口徑550 mm反射鏡減重與撓性支撐結構最佳化設計

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：193

、訪客IP：3.21.244.95

姓名

黃柏愷(Bo-Kai Huang) 查詢紙本館藏

畢業系所

光機電工程研究所

論文名稱

口徑550 mm反射鏡減重與撓性支撐結構最佳化設計
(Optimum Design of the Lightweighting Structure and Flexure Mounts for a 550 mm Mirror)

相關論文

★ 光學遮斷式晶圓定位系統與半導體製程設備之整合	★ 應用於太陽能聚光器之等光路型與金字塔型二次光學元件的分析與比較
★ 光機整合分析應用於620mm反射鏡變形分析與八吋反射鏡彈性膠緊固設計	★ 具線性齒頂修整之螺旋齒輪接觸特性研究
★ 應用投射疊紋技術於齒輪精度量測	★ 反射鏡減重與撓性支撐結構最佳化
★ 曲面反射鏡減重與背向支撐撓性機構最佳化	★ 建構拉焊機感測系統之人機介面與機器學習
★ 考量成像品質之最佳化塑膠透鏡結構設計	★ 離軸矩形反射鏡輕量化與撓性支撐結構最佳化
★ 電路板拉焊製程參數優化與烙鐵頭剩餘使用壽命預測之研究	★ ZK型雙包絡蝸桿蝸輪組接觸分析
★ 整合深度學習與立體視覺之六軸機械手臂夾取系統開發	★ 整合光源控制與深度學習辨識之平放膠體散料夾取系統開發
★ 整合視覺及力量控制之六軸機械手臂系統開發	★ 平板式太陽能菲涅爾集光透鏡與二次光學元件之設計與分析

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

衛星酬載遙測取像儀用於地表觀測，需承受高真空、高溫差、重力、25 G發射重力加速度、振動等嚴苛環境，因此在取像儀光學系統的設計中，不只考慮光學品質的要求，亦需考慮其機械結構是否能承受惡劣的工作環境，故針對遙測取像儀之主鏡進行最佳化設計。本文利用一口徑550 mm的Zerodur®主鏡，搭配參數最佳化軟體串聯電腦輔助設計、有限元素分析軟體、光機轉換程式，進行主鏡減重與撓性支撐結構最佳化設計，最佳化內容包含: 輕量化、維持剛性、良好光學品質。主鏡經過最佳化設計後減重比達66%；撓性支撐結構經過最佳化設計後，主鏡系統PV值為61 nm，RMS值為12 nm，第一共振頻率為315 Hz。

摘要(英)

Remote sensing instrument (RSI, Remote Sensing Instrument), which is used to take images for ground surface observation, will be exposed to harsh environment including vacuum, large temperature difference, high launch acceleration and random vibration. Therefore, both the optical quality and the mechanical strength should be considered when designing the optical system of a RSI. In this study, an optimization method was adopted in the lightweight design of a Zerodur® mirror and its bi-pod flexure. The optimization aims to achieve the lightest mirror while maintaining both structural rigidity and good optical quality. An optimization processing combining computer-aided design, finite element analysis, opto-mechanical analysis and optimization algorithm was successfully performed. Finally, the optimum lightweight mirror and its three optimum bi-pod flexure mounts were attained.

關鍵字(中)

★ 遙測取像儀
★ 輕量化
★ 最佳化
★ 電腦輔助設計
★ 有限元素模擬分析
★ 光機轉換

關鍵字(英)

論文目次

摘要 i
Abstract ii
致謝 iii
目錄 v
圖目錄 vii
表目錄 xiii
第一章前言 1
1.1 研究背景 1
1.2 文獻回顧 2
1.3 研究目的 10
第二章理論基礎 11
2.1 最佳化概論 11
2.2 最佳化軟體 14
2.3 最佳化流程 15
第三章福衛八號主鏡減重結構最佳化設計與分析 17
3.1福衛八號主鏡初始設計 17
3.2福衛八號主鏡減重有限元素分析 20
3.3福衛八號主鏡減重最佳化設計分析 23
3.4福衛八號主鏡減重最佳化設計與分析小結 30
第四章福衛八號撓性支撐結構最佳化設計與分析 31
4.1福衛八號撓性支撐結構初始設計 31
4.2福衛八號撓性支撐結構有限元素模擬分析 33
4.3福衛八號撓性支撐結構靈敏度分析 35
4.4福衛八號撓性支撐結構最佳化設計分析 37
4.5福衛八號撓性支撐結構結構膠分析 43
4.6福衛八號撓性支撐結構最佳化設計分析小結 46
第五章八吋反射鏡撓性支撐結構最佳化設計 49
5.1八吋反射鏡規格 49
5.2八吋反射鏡撓性支撐結構初始設計 50
5.3八吋反射鏡撓性支撐結構有限元素模擬分析 51
5.4八吋反射鏡撓性支撐結構最佳化設計分析 52
5.5八吋反射鏡撓性支撐結構結構膠分析 58
5.6八吋反射鏡撓性支撐結構最佳化設計分析小結 60
第六章八吋反射鏡系統實驗驗證 61
6.1八吋反射鏡干涉儀量測實驗原理與架構 61
6.2大口徑反射鏡多軸姿態調整平台 64
6.3八吋反射鏡撓性支撐結構組裝流程 67
6.4干涉儀量測結果 83
第七章結論與未來工作 95
參考文獻 96

參考文獻

[1] T. M. Valente and D. Vukobratovich, “A comparison of the merits of open-back, symmetric　sandwich, and contoured back mirror as lightweighted optics” , Proc. SPIE, Vol 1167, pp. 20–36, 1989.
[2] 郭喜慶，王悅勇，「大口徑反射鏡幾種輕量化孔結構形式的分析」，光學精密工程，第8卷，第6期，2000。
[3] R. GEYL, M. TARREAU and P. PLA1NCHAMP, “SOFIA Primary Mirror Fabrication & Testing” , OF&T, Vol. 4451, pp. 126–130, 2001.
[4] D. Fappani and H. Ducollet, “Manufacturing & Control of the aspherical mirrors for the telescope of the French satellite Pleiades”, Proc. of SPIE, Vol 6687 66870T-1, 2007.
[5] C. Y. Chan, Y. C Cheng, S. T. Chang, T. M. Huang and M. Y. Hsu, “Effects of accelerations and surface conditions on a pre-designed lightweight primary mirror”, Proc. SPIE, Vol 8127 81270F-1, 2011.
[6] T. Döhring, P. Hartmann, F. T. Lentes and R. Jedamzik, “Heritage of ZERODUR® Glass Ceramic for Space Applications”, Proc. SPIE, Vol 7425, 2009.
[7] M. Beier, S. Scheiding, A. Gebhardt, R. Loose, S. Risse, R. Eberhardt and A. Tunnermann, “Fabrication of high precision metallic freeform mirrors with Magnetorheological Finishing (MRF)”, Proc. SPIE, Vol 8884 88840S-1, 2013.
[8] E. D. Knohi, A. Schoeppach and M. A. Pickering, “Status of the Secondary Mirrors (M2) for the Gemini 8-rn Telescopes”, Proc. SPIE, Vol 3352, 1998.
[9] B. K. Smith, J. H. Burge, H. M. Martin, “Fabrication of large secondary mirrors for astronomical telescopes”, Proc. SPIE, Vol 3134, San Diego, United States, July, 1997.
[10] M. K. Cho, R. M. Richard, and D. Vukobratovich, ‘‘Optimum mirror shapes and supports for light weight mirrors subjected to self-weight’’ , Proc. SPIE, Vol 1167, pp. 2–19, 1989.
[11] P. Yoder , Opto-Mechanical Systems Design 3rd ed, Connecticut, 2006.
[12] J. Fitzsimmons, D. Erickson, A. Hill, R. Bartos and J. K. Wallace, “Design and analysis of flexure mounts for precision optics”, Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation, Proc. SPIE, 70181K, Marseille, France, June 2008.
[13] C. B. Chu, Y. C. Li, W. Y. Chai and X. W. Fan, “Design of bipod flexures for space mirror”, International Symposium on Photoelectronic Detection and Imaging 2011: Space Exploration Technologies and Applications, Proc. SPIE, 819620, Beijing, China, August 2011.
[14] A. Li, Z. Luan, Y. Bian and L. Liu, “Integrated analysis of strap mount for a circular mirror”, Optik, Vol. 122, Issue 17, pp. 1584-1587, September 2011.
[15] H. Kihm, H. S. Yang, K. Moon, J. H. Yeon, S. H. Lee, and Y. W. Lee, “Adjustable bipod flexures for mounting mirrors in a space telescope”, APPLIED OPTICS, Vol 51, No. 32, 2012.
[16] K. S. Park, J. H. Lee, and S. K. Youn, “Lightweight mirror design method using topology optimization” , Optical Engineering, Vol 44, pp. 053002, 2005.
[17] 楊佳文，黃巧林，「大口徑反射鏡結構參數優化設計」，中國空間科學技術，第四期，77~83頁，2011。
[18] 范綱傑，「衛載遙測取像儀反射鏡加工缺陷檢測與最佳光學成像品質之運動學裝配設計」，國立中央大學，碩士論文，民國101年。
[19] H. Kihm, H. S. Yang, “Design optimization of a 1-m lightweight mirror for a space telescope”, Optical Engineering, Vol 52, pp. 091806, No. 9, 2013.
[20] W. R. Arnold, M. Fitzgerald, R. J. Rosa and H. P. Stahl, “Next generation lightweight mirror modeling software”, Proc. of SPIE, Vol 8836 88360I-1, 2013.
[21] E. T. Kvamme and M. Sullivan, “A small, low stress, stable, 3 DOF mirror mount with one arc-second tip/tilt resolution”, Space Systems Engineering and Optical Alignment Mechanisms, 2004.
[22] S. Y. Chen, SmartDO Tutorial Manual, 2013.
[23] Zerodur®實心胚料，2015，取自https://www.hofstragroup.com/product/zerodur-blank-
disk-6-inch-diameter-1-5-inch-thick/
[24] 飛扶壁結構，2014，取自http://historylink101.com/lessons/art_history_lessons/ma/gothic
_architecture.htm。
[25] W. C .Lin, S. T. Chang, S. H. Chang, C. P. Chang, Y. C. Lin, P. H. Huang, H. L. Tsay, C. C. Chin, H. P. Pan and T. M. Huang, “Primary mirror alignment and assembly for a multispectral space telescope”, Proc. SPIE, Vol 8889, 888922, 2013.
[26] A. E. Hatheway, “Analysis of adhesive bonds in optics”, Proc. SPIE, Vol 1998, Optomechanical Design, ed. D Vukobratovich, P R Yoder, V L Genberg, 1993.
[27] BOROFLOAT®八吋反射鏡規格，2014，http://www.edmundoptics.com/optics/optical-
mirrors/focusing-concave-mirrors/quarter-wave-precision-spherical-mirrors/43588/。
[28] 鋼珠規格，2009，取自http://www.tankong.com/china/Hardness_Crush_Lood.html。
[29] P.H. Huang and J. Lin, “Optical Alignment, Integration and Test of FORMOSAT-5 Remote Sensing Instrument”, Technical Data of National Space Organization, National Applied Research Laboratories, 2014.
[30] E. E. Bloemhof, J. C. Lam, V. A. Feria and Z. Chang, “Extracting the zero-gravity surface figure of a mirror through multiple clocking in a flightlike hexapod mount”, APPLIED OPTICS, Vol. 48, No. 21, 2009.

指導教授

陳怡呈(Yi-Cheng Chen)

審核日期

2015-8-6

推文