參考文獻 |
[1] K. Lin, R. C. Frye, B. Ahn, “High rejection BPF for WiMAX applications from Silicon Integrated Passive Device Technology,” in IEEE MTT-S Int. Microw. Symp. Dig.,2010, pp. 1364–1367.
[2] H. K. Chen, Y. C. Hsu, T. Y. Lin, D. C. Chang, Y. Z. Juang, and S. S. Lu, “CMOS wideband LNA design using integrated passive device,” in IEEE MTT-S Int. Microw. Symp. Dig., 2009, pp. 673–676.
[3] C.-H. Huang, T.-S. Horng, C.-C. Wang, C.-T. Chiu, and C.-P. Hung, “Optimum design of transformer-type Marchand balun using scalable integrated passive device technology,” IEEE Trans. Compon., Packag., Manuf. Technol., vol. 2, no. 8, pp. 1370–1377, Aug. 2012
[4] P. B. Chinoy and J. Tajadod, ‘‘Processing and microwave characterization of multilevel interconnects using benzocyclobutene dielectric’’, IEEE Trans. Components, Hybrids, and Manufacturing Technology, Vol. 16, pp. 714719, 1993.
[5] H.-Y. Li, “Analog and digital phase shifters based on all-pass networks,” Master dissertation, National Central University, 2014.
[6] M. Kumar, R. J. Menna, and H.-C. Huang, “Broad-band active phase shifter using dual-gate MESFET,” IEEE Trans. Microw. Theory Tech., vol. MTT-29, no. 10, pp. 1098–1102, Oct. 1981.
[7] S. J. Kim and N. H. Myung, “A new active phase shifter using a vector sum method,” IEEE Microw. Guided Wave Lett., vol. 10, no. 6, pp. 233–235, Mar. 2000.
[8] K.-J. Koh, and G. M. Rebeiz, “0.13-µm CMOS phase shifters for X-, Ku-, and K-band phased arrays,” IEEE J. Solid-State Circuits, vol. 42, no. 11, pp. 2535–2546, Nov. 2007.
[9] K.-J. Koh and G. M. Rebeiz, “A 6-18 GHz 5-bit active phase shifter,” in IEEE MTT-S Int. Microw. Symp. Dig., May 2010, pp. 792–795.
[10] A. Asoodeh and M. Atarodi, “A full 360° vector-sum phase shifter with very low rms phase error over a wide bandwidth,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 6, pp. 1626–1634, Jun. 2012.
[11] A. S. Nagra and R. A. York, “Distributed analog phase shifters with low insertion loss,” IEEE Trans. Microw. Theory Tech., vol. 47, no. 9, pp. 1705–1711, Sep. 1999.
[12] N. S. Barker and G. M. Rebeiz, “Optimization of distributed MEMS transmission-line phase shifters—U-band and W-band designs,” IEEE Trans. Microw. Theory Tech., vol. 48, no. 11, pp. 1957–1966, Nov. 2000.
[13] B. Acikel, T. R. Taylor, P. J. Hansen, J. S. Speck, and R. A. York, “A new high performance phase shifter using BaxSr1−xTiO3 thin films,”IEEE Microw. Wireless Compon. Lett., vol. 12, no. 7, pp. 237–239, Jul. 2002.
[14] F. Ellinger, H. Jackel, and W. Bachtold, “Varactor-loaded transmission-line phase shifter at C-band using lumped elements,” IEEE Trans. Microw. Theory Tech., vol. 51, no. 4, pp. 1135–1140, Apr. 2003.
[15] A.-L. Franc, O. H. Karabey, G. Rehder, E. Pistono, R. Jakoby, and P. Ferrari, “Compact and broadband millimeter-wave electrically tunable phase shifter combining slow-wave effect with liquid crystal technology,” IEEE Trans. Microw. Theory Tech., vol. 61, no. 11, pp. 3905–3915, Nov. 2013.
[16] R. H. Hardin, E. J. Downey, and J. Munushian, “Electronically-variable phase shifters utilizing variable capacitance diodes,” Proc. IRE (Correspondence), vol. 48, no. 5, pp. 944–945, May 1960.
[17] S. Lucyszyn and I. D. Robertson, “Decade bandwidth hybrid analogue phase shifter using MMIC reflection terminations,” Electron. Lett., vol. 28, no. 11, pp. 1064–1065, May 1992.
[18] F. Ellinger, R. Vogt, and W. B¨achtold, “Compact reflective-type phase-shifter MMIC for C-band using a lumped-element coupler,” IEEE Trans. Microw. Theory Tech., vol. 49, no. 5, pp. 913–917, May 2001.
[19] D. Adler and R. Popovich, “Broadband switched-bit phase shifter using all-pass networks,” in IEEE MTT-S Int. Microw. Symp. Dig., Jul. 1991, pp. 265–268.
[20] D.-W. Kang, H. D. Lee, C.-H. Kim, and S. Hong, “Ku-band MMIC phase shifter using a parallel resonator with 0.18-µm CMOS technology,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 1, pp. 294–301, Jan. 2006.
[21] I. J. Bahl and D. Conway, “L- and S-band compact octave bandwidth 4-bit MMIC phase shifters,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 2, pp. 293–299, Feb. 2008.
[22] M. Hangai, M. Hieda, N. Yunoue, Y. Sasaki, and M. Miyazaki, “S- and C-band ultra-compact phase shifters based on all-pass networks,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 1, pp. 41–47, Jan. 2010.
[23] M. Meghdadi, M. Azizi, M. Kiani, A. Medi, and M. Atarodi, “A 6-bit CMOS phase shifter for S-band,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 12, pp. 3519–3526, Dec. 2010.
[24] Q. Xiao, “A compact L-band broadband 6-bit mmic phase shifter with low phase error,” in Proc. Eur. Microw. Integr. Circuits Conf., Oct. 2011, pp. 410–413.
[25] X. Tang and K. Mouthaan, “Design of large bandwidth phase shifters using common mode all-pass networks,” IEEE Microw. Wireless Compon. Lett., vol. 22, no. 2, pp. 55–57, Feb. 2012.
[26] S. Gevorgian, Ferroelectrics in Microwave Devices, Circuits and Systems: Physics, Modeling, Fabrication and Measurements. New York: Springer-Verlag, 2009.
[27] J.-S. Fu, “Adaptive impedance matching circuits based on ferroelectric and semiconductor varactors,” Ph. D. dissertation, The University of Michigan, 2009.
[28] S. Gevorgain, Ferroelectrics in Microwave Devices, Circuits and Systems, 1st ed. London: Springer–Verlag, 2009.
[29] H.-Y. Li and J.-S. Fu, “Analysis of magnetically coupled all-pass network for phase-shifter design,” IEEE Trans. Microw. Theory Tech., vol. 62, no. 9, pp. 2025–2037, Sep. 2014.
[30] C. Huang, K. Buisman, L. K. Nanver, F. Sarubbi, M. Popadi ́c, T. L. M. H. Schellevis, L. E. Larson, and L. C. N. de Vreede, “A 67 dBm OIP3 multistacked junction varactor,” IEEE Microw. Wireless Comp. Lett., vol. 18, no. 11, pp. 749–751, November 2008.
[31] P.-B. Chinoy and J. Tajadod, “Processing and microwave characterization of multilevel interconnects using benzocyclobutene dielectric,” IEEE Trans. Components, Hybrids, and Manufacturing Technology, vol. 16, pp. 714-719,1993.
[32] S.-C. Chen, “Design and fabrication of ferroelectric varactors,” Master dissertation, National Central University, 2013.
[33] O. El-Gharniti, E. Kerhervé, and J.-B. Bégueret, “Modeling and characterization of on-chip transformers for silicon RFIC,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 4, pp. 607–615, Apr. 2007.
[34] J.-S. Fu, X. A. Zhu, J. D. Phillips, and A. Mortazawi, “Improving the linearity of ferroelectric-based microwave tunable circuits,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 2, pp. 354–360, February 2007.
[35] Z. Zhao, X. Wang, K. Choi, C. Lugo, and A. T. Hunt, “Ferroelectric phase shifters at 20 and 30 GHz” IEEE Trans. Microw. Theory Tech., vol. 55, no. 2, pp. 430–437, February 2007.
[36] L.-Y. V. Chen, R. Forse, A. H. Cardona, T. C. Watson, and R. York, “Compact analog phase shifters using thin-film (Ba,Sr)TiO3 varactors,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2007, pp. 667–670.
[37] D. Kim, Y. Choi, M. Ahn, M. G. Allen, J. S. Kenney and P. Marry, “2.4 GHz continuously variable ferroelectric phase shifters using all-pass networks” IEEE Microw. Wireless Compon. Lett., vol. 13, no. 10, pp. 434–436, Oct. 2003.
|