參考文獻 |
[1] J. Li, C. D., J. Zhang, “Power-aware routing protocols in AD HOC wireless networks,” IEEE Wireless Communications, vol. 12, no. 6, pp. 69-81, Dec. 2005.
[2] M. A. M. Vieira, D. C. da Silva Junio, C. N. Coelho. Jr. and J. M. da Mata, “Survey on wireless sensor network devices,” in IEEE Emerging Technologies and Factory Automation Conference, 2003, pp. 537-544.
[3] W. Wu, M. A. T. Sanduleanu, X. Li and J. R. Long, “17 GHz RF front-ends for low-power wireless sensor networks,” IEEE J. Solid-State Circuits, vol. 43, no. 9, pp.1909-1919, Sep. 2008.
[4] C. J. Hwang, I. McGregor, R. Oxland, G. Whyte, I. G. Thayne and K. Elgaid, “An ultra-low power OOK RF transceiver for wireless sensor networks,” in European Microwave Conf., Sep. 2009, pp. 1323- 1326.
[5] C. W. Byeon, C. H. Yoon and C. S. Park, “A 67-mW 10.7-Gb/s 60-GHz OOK CMOS transceiver for short-range wireless communications,” IEEE Trans. Microwave Theory Tech., vol. 61, no. 9, pp. 3391-3401, Sep. 2009.
[6] P. Upadhyaya, M. Rajashekharaiah, D. Heo, D. M. Rector, Y. J. E. Chen, “Low power and low phase noise 5.7 GHz LC VCO in OOK transmitter for neurosensory application,” in IEEE MTT-S International Microwave Symp. Digest, 2005, pp. 1539–1542.
[7] K. Kim, J. Choi, M. Seo and S. Nam, “500 MHz OOK transmitter with 22 pJ/bit, 38.4% efficiency using RF current combining,” IEEE Microw. Wireless Compo. Lett., vol. 24, no. 6, pp. 424-426, Jun. 2014.
[8] P. Favre, N. Joehl, A. Vouilloz, P. Deval, C. Dehollain and M. J. Declercq, “A 2-V 600- A 1-GHz BiCMOS super-regenerative receiver for ISM applications,” IEEE J. Solid-State Circuits, vol. 33, no. 12, pp. 2186-2196, Dec. 1998.
[9] H.-G. Park, J. Lee, J.-A Jang, J.-H. Jang, D.-S. Lee, H.-J. Kim, S.-J. Kim, S.-G. Lee and K.-Y. Lee, “An ultra-low-power super regeneration oscillator-based transceiver with 177- μW leakage-compensated PLL and automatic quench waveform generator,” IEEE Trans. Microwave Theory Tech., vol. 61, no. 9, pp. 3381-3390, Sep. 2013.
[10] K. Kang, F. Lin, D.-D. Pham, J. Brinkhoff, C.-H. Heng, Y. X. Guo and X. Yuan, “A 60-GHz OOK receiver with an on-chip antenna in 90 nm CMOS,” IEEE J. Solid-State Circuits, vol. 45, no. 9, pp. 1720-1731, Sep. 2010.
[11] X. Huang, P. Harpe, G. Dolmans, H. de Groot and J. R. Long, “A 780–950 MHz, 64–146 μW power-scalable synchronized-switching OOK receiver for wireless event-driven applications,” IEEE J. Solid-State Circuits, vol. 49, no. 5, pp. 1135-1147, May 2014.
[12] Y. Mo, E. Skafidas, R. Evans and I. Mareels, “A 40 GHz power efficient static CML frequency divider in 0.13-μm CMOS technology for high speed millimeter-wave wireless systems,” in IEEE International Conference Circuits and Systems for Communications, 2008, pp. 812-815.
[13] C. Zhou, L. Zhang, Y. Wang, Z. Yu and H. Qian, “Injection-locking-based power and speed optimization of CML dividers,” IEEE Tran. Circuits and Systems—II: Express Briefs, vol. 58, no. 9, pp. 565-569, Sep. 2011.
[14] J.-O. Plouchart, J. Kim, V. Karam, R. Trzcinski and J. Gross, “Performance variations of a 66GHz static CML divider in 90nm CMOS,” in IEEE Int. Solid-State Circuits Conf. Dig. Tech. Papers, Feb. 2006, pp. 2142-2151.
[15] U. Singh and M. M. Green, “High-frequency CML clock dividers in 0.13-μm CMOS operating up to 38 GHz,” IEEE J. Solid-State Circuits, vol. 40, no. 8, pp. 1658-1661, Aug. 2005.
[16] X. Yi, C. C. Boon, M. A. Do, K. S. Yeo and W. M. Lim, “Design of ring-oscillator-based injection-locked frequency dividers with single-phase inputs,” IEEE Microw. Wiless Compon. Lett., vol. 21, no. 10, pp. 559-561, Oct. 2011.
[17] S.-L. Jang, Y.-H. Chuang, S.-H. Lee and J.-J. Chao, “Circuit techniques for CMOS divide-by-four frequency divider,” IEEE Microw. Wiless Compon. Lett., vol. 17, no. 3, pp. 217-219, Mar. 2007.
[18] R.-F. Ye, T.-S. Horng and J.-M. Wu, “Low power FSK receiver using an oscillator-based injection-locked frequency divider,” IEEE Microw. Wiless Compon. Lett., vol. 24, no. 2, pp. 114-116, Feb. 2014.
[19] Y.-S Lin, C.-H. Wu, C.-C. Huang, C.-L. Lu and Y.-H. Wang, “Ultra-wide locking range regenerative frequency dividers with quadrature-injection current-mode-logic loop divider,” IEEE Microw. Wiless Compon. Lett., vol. 24, no. 3, pp. 179-181, Mar. 2014.
[20] Y.-S. Lin, C.-H. Wu, C.-L. Lu and Y.-H. Wang, “A divide-by-four transformer-coupled regenerative frequency divider with quadrature outputs,” IEEE Microw. Wiless Compon. Lett., vol. 24, no. 4, pp. 260-262, Apr. 2014.
[21] C.-A. Yu, T.-N. Luo and Y.-J. E. Chen, “A V-band divide-by-four frequency divider with wide locking range and quadrature outputs,” IEEE Microw. Wiless Compon. Lett., vol. 22, no. 2, pp. 260-262, Feb. 2012.
[22] Y.-H. Kuo, J.-H. Tsai, T.-W. Huang and H. Wang, “Design and analysis of digital-assisted bandwidth-enhanced miller divider in 0.18- μm CMOS process,” IEEE Trans, Microw. Theory Techn., vol. 60, no. 12, pp. 3769-3777, Dec. 2012.
[23] W.-S. Chang, K.-W. Tan and S. S. H. Hsu, “A 56.5–72.2 GHz transformer-injection miller frequency divider in 0.13μm CMOS,” IEEE Microw. Wiless Compon. Lett., vol. 20, no. 7, pp. 393-395, Jul. 2010.
[24] T.-N. Luo, S.-Y. Bai and Y.-J. Emery Chen, “A 60-GHz 0.13-μm CMOS divide-by-three frequency divider,” IEEE Trans, Microw. Theory Techn., vol. 56, no. 11, pp. 2409-2415, Nov. 2008.
[25] B. Razavi, “A study of injection locking and pulling in oscillators,” IEEE J. Solid-State Circuits, vol. 39, no. 9, pp. 1415-1424, Sep. 2004.
[26] Y.-L. Yeh and H.-Y. Chang, “Design and analysis of a W-band divide-by-three injection-locked frequency divider using second harmonic enhancement technique,” IEEE Trans, Microw. Theory Techn., vol. 60, no. 6, pp. 1617-1625, Jun. 2012.
[27] C.-Y. Wu and C.-Y. Yu, “Design and analysis of a millimeter-wave direct injection-locked frequency divider with large frequency locking range,” IEEE Trans, Microw. Theory Techn., vol. 55, no. 8, pp. 1649-1658, Aug. 2007.
[28] K.-C. Lin, H.-K. Chiou, K.-H. Chien, T.-Y. Yang, P.-C. Wu, C.-L. Ko and Y.-Z. Juang, “A 4.2-mW 6-dB gain 5–65-GHz gate-pumped down-conversion mixer using Darlington cell for 60-GHz CMOS Receiver,” IEEE Trans, Microw. Theory Techn., vol. 61, no. 4, pp. 1516-1522, Apr. 2013.
[29] A. Hajimiri and T. H. Lee, “Design issues in CMOS differential LC oscillators,” IEEE J. Solid-State Circuits, vol. 34, no. 5, pp. 717-724, May 1999.
[30] S.-L. Jang, C.-W. Chang, W.-C. Cheng, C.-F. Lee and M.-H. Juang, “Low-power divide-by-3 injection-locked frequency dividers implemented with injection transformers,” Electron. Lett., vol. 45, no. 5, pp. 240-241, Feb. 2009.
[31] S. Rong and H. C. Luong, “A 1V 1.7mW 25GHz transformer-feedback divide-by-3 frequency divider with quadrature outputs,” IEEE Asian Solid-State Circuits Tech., pp. 328-331, Nov. 2007.
[32] S. Seo, H. Seo, S. Jeon and J.-S. Rieh, “A 20–30 GHz divide-by-3 ring-oscillator-based injection locked frequency divider with a wide locking range,” Microwave and Optical Technology Letters, vol. 53, no. 4, pp. 839-841, Apr. 2011.
[33] M.-W. Li, P.-C. Wang, T.-H. Huang, “Low-voltage, wide-locking-range, millimeter-wave divide-by-5 injection-locked frequency dividers,” IEEE Trans, Microw. Theory Techn., vol. 60, no. 3, pp. 679-685, Mar. 2012.
[34] S.-L. Jang, R.-K. Yang, C.-W. Chang and M.-H. Juang, “Multi-modulus LC injection-locked frequency dividers using single-ended injection,” IEEE Microw. Wiless Compon. Lett., vol. 19, no. 5, pp. 311-313, May 2009.
[35] Y.-T. Chen, M.-W. Li, H.-C. Kuo, T.-H. Huang and H.-R. Chuang, “Low-voltage K-band divide-by-3 injection-locked frequency divider with floating-source differential injector,” IEEE Trans, Microw. Theory Techn., vol. 60, no. 1, pp. 60-67, Jan. 2012.
[36] K.-H. Tsai, L.-C. Cho, J.-H.Wu and S.-I. Liu, “3.5 mW W-band frequency divider with wide locking range in 90 nm CMOS technology,” in IEEE Int. Solid-State Circuits Conf. Dig. Tech. Papers, Feb. 2008, pp. 466–467.
[37] T.-N. Luo and Y.-J. E. Chen, “A 0.8-mW 55-GHz dual-injection-locked CMOS frequency divider,” IEEE Trans. Microw. Theory Techn., vol. 56, no. 3, pp. 620–625, Mar. 2008.
[38] Y.-H. Kuo, J.-H. Tsai, H.-Y. Chang and T.-W. Huang, “Design and analysis of a 77.3% locking-range divide-by-4 frequency divider,” IEEE Trans. Microw. Theory Techn., vol. 59, no. 10, pp. 2477–2485, Oct. 2011.
[39] B.-J. Huang, K.-Y. Lin and H. Wang, “Millimeter-wave low power and miniature CMOS multicascode low-noise amplifiers with noise reduction topology,” IEEE Trans, Microw. Theory Techn., vol. 57, no. 12, pp. 3049-3059, Dec. 2009.
[40] H.-C. Yeh, Z.-Y. Liao and H. Wang, “Analysis and design of millimeter-wave low-power CMOS LNA with transformer-multicascode topology,” IEEE Trans, Microw. Theory Techn., vol. 59, no. 12, pp. 3441-3454, Dec. 2011.
[41] H.-C. Yeh, C.-C. Chiong, S. Aloui and H. Wang, “Analysis and design of millimeter-wave low-voltage CMOS cascode LNA with magnetic coupled technique,” IEEE Trans, Microw. Theory Techn., vol. 60, no. 12, pp. 4066-4079, Dec. 2012.
[42] K.-J. Sun, Z.-M. Tsai, K.-Y. Lin and H. Wang, “A 10.8-GHz CMOS low-noise amplifier using parallel-resonant inductor,” in IEEE MTT-S International Microw. Symposium Digest, 2007, pp. 1795-1798.
[43] H.-C. Yeh and H. Wang, “A miniature Q-band CMOS LNA with quadruple-cascode topology,” in IEEE MTT-S International Microw. Symposium Digest, 2011, pp. 1-4.
[44] R.-M. Weng, C.-Y. Liu and P.-C. Lin, “A low-power full-band low-noise amplifier for ultra-wideband receivers,” IEEE Trans, Microw. Theory Techn., vol. 58, no. 8, pp. 2077-2083, Aug. 2010.
[45] C.-P. Chang, J.-H. Chen and Y.-H. Wang, “A fully integrated 5 GHz low-voltage LNA using forward body bias technology,” IEEE Microw. Wiless Compon. Lett., vol. 19, no. 3, pp. 176-178, Mar. 2009.
[46] H.-H. Hsieh and L.-H. Lu, “Design of ultra-low-voltage RF frontends with complementary current-reused architectures,” IEEE Trans, Microw. Theory Techn., vol. 55, no. 7, pp. 1445-1458, Jul. 2007.
[47] D.-H. Shin, J. Park and C.-P. Yue, “A low-power, 3–5-GHz CMOS UWB LNA using transformer matching technique,” in IEEE Asian Solid-State Circuits Conference, 2007, pp. 95-98.
[48] T.-K. Nguyen, C.-H. Kim, G.-J.Ihm, M.-S. Yang and S.-G. Lee, “CMOS low noise amplifier design optimization techniques,” IEEE Trans, Microw. Theory Techn., vol. 52, no. 5, pp. 1433-1442, May 2004.
[49] J.-R. Long, “Monolithic transformers for silicon RF IC design,” IEEE J. Solid-State Circuits, vol. 35, no. 9, pp. 1368-1382, Sep. 2000.
[50] G. Gonzalez, “Microwave Transistor Amplifiers: Analysis and Design,” 2nd ed. Upper Saddle River. Englewood Cliffs, NJ, USA: Prentice-Hall, 1997.
[51] B. Razavi, “Design of Analog CMOS Integrated Circuits,” NewYork, NY, USA: McGraw-Hill, 2001.
[52] V. Aparin and L.-E. Larson, “Modified derivative superposition method for linearizing FET low-noise amplifiers,” IEEE Trans. Microw. Theory Techn., vol. 53, no. 2, pp. 571–581, Feb. 2005.
[53] T. Joo et al, “A WLAN RF CMOS PA with large-signal MGTR method,” IEEE Trans. Microw. Theory Techn., vol. 61, no. 3, pp. 1272–1279, Mar. 2013.
[54] T.-W. Kim et al, “Highly linear receiver front-end adopting MOSFET transconductance linearization by multiple gated transistors,” IEEE J. Solid-State Circuits, vol. 39, no. 1, pp. 223–229, Jan. 2004.
[55] T. Yao et al, “Algorithmic design of CMOS LNAs and PAs for 60-GHz radio,” IEEE J. Solid-State Circuits, vol. 42, no. 5, pp. 1044–1057, May 2007.
[56] T. O. Dickson et al, “The invariance of characteristic current densities in nanoscale MOSFETs and its impact on algorithmic design methodologies and design porting of Si(Ge) (Bi)CMOS high-speed building blocks,” IEEE J. Solid-State Circuits, vol. 41, no. 8, pp. 1830–1845, Aug. 2006.
[57] S.-C. Shin, M.-D Tsai, R.-C. Liu, K.-Y. Lin and H. Wang, “A 24-GHz 3.9-dB NF low-noise amplifier using 0.18 μm CMOS technology,” IEEE Microw. Wiless Compon. Lett., vol. 15, no. 7, pp. 448-450, Jul. 2005.
[58] Y.-L. Wei, Shawn S. H. Hsu and J.-D. Jin, “A low-power low-noise amplifier for K-band applications,” IEEE Microw. Wiless Compon. Lett., vol. 19, no. 2, pp. 116-118, Feb. 2005.
[59] M.-H. Tsai, Shawn S. H. Hsu, F.-L. Hsueh, C.-P. Jou, T.-J. Yeh, J.-D. Jin and H.-H. Hsie, “A 24-GHz low-noise amplifier co-designed with ESD protection using junction varactors in 65-nm RF CMOS,” in IEEE MTT-S International Microw. Symposium Digest, 2011, pp. 1-4.
[60] H.-Y. Chang, C.-H. Lin, Y.-C. Liu, Y.-L. Yeh, K. Chen and S.-H. Wu, “65-nm CMOS dual-gate device for Ka-band broadband low-noise amplifier and high-accuracy quadrature voltage-controlled oscillator,” IEEE Trans. Microw. Theory Techn., vol. 61, no. 6, pp. 2402–2413, Jun. 2005.
[61] F. Inanlou, C.-T. Coen and J.-D. Cressler, “A 1.0 V, 10–22 GHz, 4 mW LNA utilizing weakly saturated SiGe HBTs for single-chip, low-power, remote sensing applications,” IEEE Microw. Wiless Compon. Lett., vol. 24, no. 12, pp. 890-892, Dec. 2014.
[62] T. Kanar and G.-M. Rebeiz, “X- and K-band SiGe HBT LNAs with 1.2- and 2.2-dB mean noise figures,” IEEE Trans. Microw. Theory Techn., vol. 62, no. 10, pp. 2381–2389, Oct. 2014.
[63] E.-N. Mohamed, S.-S. Edgar and E. Kamran, “A millimeter-wave (23–32 GHz) wideband BiCMOS low-noise amplifier,” IEEE J. Solid-State Circuits, vol. 45, no. 2, pp. 289–299, Feb. 2010.
[64] M. Chen and J. Lin, “A 0.1–20 GHz low-power self-biased resistive-feedback LNA in 90 nm digital CMOS,” IEEE Microw. Wiless Compon. Lett., vol. 19, no. 5, pp. 323-325, May 2009.
[65] E. Adabi, B. Heydari, M. Bohsali and A.-M. Niknejad, “30 GHz CMOS low noise amplifier,” in IEEE Radio Frequency Integrated Circuits Symposium, 2007, pp. 625-628.
[66] P. K. Tsai, C. Y. Liu and T. H. Huang, “A CMOS voltage controlled oscillator and frequency tripler for 22 – 27 GHz local oscillator generation” IEEE Microw. Wiless Compon. Lett., vol. 21, no. 9, pp. 492-494, Sep. 2011.
[67] H.-Yeh Chang, M.-F. Lei, C.-S. Lin, Y.-H. Cho, Z.-M. Tsai and H. Wang, “A 46-GHz direct wide modulation bandwidth ASK modulator in 0.13-μm CMOS technology,” IEEE Microw. Wiless Compon. Lett., vol. 17, no. 9, pp. 691-693, Sep. 2007.
[68] P. Favre, N. Joehl, A. Vouilloz, P. Deval, C. Dehollain and M.-J. Declercq, “A 2-V 600-μA 1-GHz BiCMOS super-regenerative receiver for ISM applications,” IEEE J. Solid-State Circuits, vol. 33, no. 12, pp. 2186-2196, Dec. 1998.
[69] H.-G. Park, J. Lee, J.-A Jang, J.-H. Jang, D.-S. Lee, H.-J. Kim, S.-J. Kim, S.-G. Lee and K.-Y. Lee, “An ultra-low-power super regeneration oscillator-based transceiver with 177-μW leakage-compensated PLL and automatic quench waveform generator,” IEEE Trans, Microw. Theory Techn., vol. 61, no. 9, pp. 3381-3390, Sep. 2013.
[70] Y. Wang, B. Afshar, LuYe, V.-C. Gaudet and A.-M. Niknejad, “Design of a low power, inductorless wideband variable-gain amplifier for high-speed receiver systems,” IEEE Tran. Circuits and Systems—I: Express Briefs, vol. 59, no. 4, pp. 696-707, Apr. 2012.
[71] S.-L. Jang, C.-F. Lee and W.-H. Yeh, “A divide-by-3 injection locked frequency divider with single-ended input,” IEEE Microw. Wiless Compon. Lett., vol. 18, no. 2, pp. 142-144, Feb. 2008.
[72] H.-R. Rategh, H. Samavati and T.-H. Lee, “A CMOS frequency synthesizer with an injection-locked frequency divider for a 5-GHz wireless LAN receiver,” IEEE J. Solid-State Circuits, vol. 35, no. 5, pp. 780-787, May 2000. |