參考文獻 |
[1] K. N. Tu, "Recent advances on electromigration in very-large-scale-integration of interconnects," Journal of Applied Physics 94, 5451 (2003).
[2] M. Y. Guo, C. K. Lin, C. Chen, and K. N. Tu, "Asymmetrical growth of Cu6Sn5 intermetallic compounds due to rapid thermomigration of Cu in molten SnAg solder joints," Intermetallics 29, 155 (2012).
[3] J. H. Ke, H. Y. Chuang, W. L. Shih, and C. R. Kao, "Mechanism for serrated cathode dissolution in Cu/Sn/Cu interconnect under electron current stressing," Acta Materialia 60, 2082 (2012).
[4] M. H. Jeong, J. W. Kim, B. H. Kwak, and Y. B. Park, "Effects of annealing and current stressing on the intermetallic compounds growth kinetics of Cu/thin Sn/Cu bump," Microelectronic Engineering 89, 50 (2012).
[5] M. H. Jeong, G. T. Lim, B. J. Kim, K. W. Lee, J. D. Kim, Y. C. Joo, et al., "Interfacial reaction effect on electrical reliability of Cu pillar/Sn bumps," Journal of Electronic Materials 39, 2368 (2010).
[6] C. J. Chan, C. C. Chuang, J. Y. Juang, S. T. Lu, and T. C. Chang, "Assembly and Reliability characterization of 3D chip stacking with 30 μm pitch lead free solder micro bump interconnection," Electronic Components and Technology Conference, 1043 (2010).
[7] A. Munding, H. Hübner, A. Kaiser, S. Penka, P. Benkart, and E. Kohn, “Cu/Sn solid–liquid interdiffusion bonding” in “Wafer level 3D-ICs process technology”, edited by C. S. Tan, R. J. Gutmann, and L. R. Reif (Springer US, 2008), 1 (2008).
[8] I. Panchenko, K. Croes, I. De Wolf, J. De Messemaeker, E. Beyne, and K. J. Wolter, "Degradation of Cu6Sn5 intermetallic compound by pore formation in solid–liquid interdiffusion Cu/Sn microbump interconnects," Microelectronic Engineering 117, 26 (2014).
[9] R. An, Y. Tian, R. Zhang, and C. Wang, "Electromigration-induced intermetallic growth and voids formation in symmetrical Cu/Sn/Cu and Cu/Intermetallic compounds (IMCs)/Cu joints," Journal of Materials Science: Materials in Electronics 26, 2674 (2015).
[10] H. Y. Chuang, J. J. Yu, M. S. Kuo, H. M. Tong, and C. R. Kao, "Elimination of voids in reactions between Ni and Sn: A novel effect of silver," Scripta Materialia 66, 171 (2012).
[11] C. Chen, H. M. Tong, and K. N. Tu, "Electromigration and thermomigration in Pb-free flip-chip solder joints," Annual Review of Materials Research 40, 531(2010).
[12] E. C. C. Yeh, W. J. Choi, K. N. Tu, P. Elenius, and H. Balkan, "Current-crowding-induced electromigration failure in flip chip solder joints," Applied Physics Letters 80, 580 (2002).
[13] Y. S. Lai and C. L. Kao, "Characteristics of current crowding in flip-chip solder bumps," Microelectronics Reliability 46, 915 (2006).
[14] S. W. Liang, Y. W. Chang, and C. Chen, "Effect of Al-trace dimension on Joule heating and current crowding in flip-chip solder joints under accelerated electromigration," Applied Physics Letters 88, 172108 (2006).
[15] D. Chen, C. E. Ho, and J. C. Kuo, "Current stressing-induced growth of Cu3Sn in Cu/Sn/Cu solder joints," Materials Letters 65, 1276 (2011).
[16] H. Y. Chuang, T. L. Yang, M. S. Kuo, Y. J. Chen, J. J. Yu, C. C. Li, and C. R. Kao, "Critical concerns in soldering reactions arising from space confinement in 3D-IC packages," IEEE Transactions on Device and Materials Reliability 12, 233 (2012).
[17] J. F. Li, P. A. Agyakwa, and C. M. Johnson, "Interfacial reaction in Cu/Sn/Cu system during the transient liquid phase soldering process," Acta Materialia 59, 1198 (2011).
[18] K Sakuma, P. S. Andry, B. Dang, J. Maria, C. K. Tsang, C. Patel, S. L. Wright, B. Webb, E. Sprogis, S. K. Kang, R. Polastre, R. Horton, and J. U. Knickerbocker, "3D chip stacking technology with low-volume lead-free interconnections," Electronic Components and Technology Conference, 627 (2007).
[19] B. Lee, J. Park, J. Song, K. W. Kwon, and H. J. Lee, "Effects of bonding temperature and pressure on the electrical resistance of Cu/Sn/Cu joints for 3D integration applications," Journal of Electronic Materials 40, 324 (2010).
[20] H. X. Xie, D. Friedman, K. Mirpuri, and N. Chawla, "Electromigration damage characterization in Sn-3.9Ag-0.7Cu and Sn-3.9Ag-0.7Cu-0.5Ce solder joints by three-dimensional X-ray tomography and ccanning electron Microscopy," Journal of Electronic Materials 43, 33 (2013).
[21] H. Y. Chen, D. Y. Shin, C. C. Wei, C. H. Tung, Y. L. Hsiao, Douglas C. H. Yu, Y. C. Liang, and C. Chen, "Generic rules to achieve bump electromigration immortality for 3D IC integration," Electronic Components & Technology Conference, 49 (2013).
[22] Y. H. Lin, Y. C. Hu, C. M. Tsai, C. R. Kao, and K. N. Tu, "In situ observation of the void formation-and-propagation mechanism in solder joints under current-stressing," Acta Materialia 53, 2029 (2005).
[23] F. Y. Ouyang, W. C. Jhu, and T. C. Chang, "Thermal-gradient induced abnormal Ni3Sn4 interfacial growth at cold side in Sn2.5Ag alloys for three-dimensional integrated circuits," Journal of Alloys and Compounds 580, 114 (2013).
[24] C. H. Wang and J. L. Liu, "Effects of Sn thickness on morphology and evolution of Ni3Sn4 grains formed between molten Sn and Ni substrate," Intermetallics 61, 9 (2015).
[25] C. H. Wang and K. T. Li, "Study of electromigration resistance of (Pd,Ni)Sn4 phase in lead-free solder joints," Journal of Alloys and Compounds 654, 546 (2016).
[26] S. A. Belyakov and C. M. Gourlay, "NiSn4 formation during the solidification of Sn–Ni alloys," Intermetallics 25, 48 (2012).
[27] T. Laurila, V. Vuorinen, and J. K. Kivilahti, "Interfacial reactions between lead-free solders and common base materials," Materials Science and Engineering: R: Reports 49, 1 (2005).
[28] J. J. Yu, J. Y. Wu, S. Yang and C. R. Kao, "Effect of Ag concentration on Ni/Sn-xAg/Ni micro joints under space confinement," Electronics Packaging and iMAPS All Asia Conference, 842 (2015).
[29] C. S. Liu, C. E. Ho, C. S. Peng, and C. R. Kao, "Effects of joining sequence on the interfacial reactions and substrate dissolution behaviors in Ni/Solder/Cu joints," Journal of Electronic Materials 40, 1912 (2011).
[30] K. N. Tu and K. Zeng, "Tin–lead (SnPb) solder reaction in flip chip technology, " Materials Science and Engineering: R: Reports 34, 1 (2001).
[31] C. C. Lee, P. J. Wang, and J. S. Kim, "Are intermetallics in Solder Joints really brittle?, " Electronic Components and Technology Conference, 648 (2007).
[32] Y. Wang and P. S. Ho, "Mode II electromigration failure mechanism in Sn-based Pb-free solder joints with Ni under-bump metallization," Applied Physics Letters 103, 121909 (2013).
[33] Y. Wang, S. H. Chae, R. Dunne, Y. Takahashi, K. Mawatari, P. Steinmann, T. Bonifield, T. Jiang, J. Im, and P. S. Ho, "Effect of intermetallic formation on electromigration reliability of TSV-microbump joints in 3D interconnect, " Electronic Components and Technology Conference, 319 (2012).
[34] F. Y. Ouyang, H. Hsu, Y. P. Su, and T. C. Chang, "Electromigration induced failure on lead-free micro bumps in three-dimensional integrated circuits packaging," Journal of Applied Physics 112, 023505 (2012).
[35] H. Gan, W. J. Choi, G. Xu, and K. N. Tu, "Electromigration in solder joints and solder lines, " Journal of the Minerals, Metals, and Materials Society 54, 34 (2002-06).
[36] Y. H. Lin, C. M. Tsai, Y. C. Hu, Y. L. Lin, and C. R. Kao, "Electromigration-induced failure in flip-chip solder joints, " Journal of Electronic Materials 34, 1 (2005).
[37] J. H. Ke, T. L. Yang, Y. S. Lai, and C. R. Kao, "Analysis and experimental verification of the competing degradation mechanisms for solder joints under electron current stressing," Acta Materialia 59, 2462 (2011).
[38] C. Y. Liu, L. Ke, Y. C. Chuang, and S. J. Wang, "Study of electromigration-induced Cu consumption in the flip-chip Sn∕Cu solder bumps," Journal of Applied Physics 100, 083702 (2006).
[39] C. Y. Liu, Y. C. Hsu, Y. J. Hu, T. S. Huang, C. T. Lu, and A. T. Wu, "Back-fill Sn flux against current-stressing at cathode micro Cu/Sn interface," ECS Solid State Letters 3, 17 (2013).
[40] I. A. Blech and C. Herring, "Stress generation by electromigration," Applied Physics Letters 29, 131 (1976).
[41] C. C. Wei and C. Chen, "Critical length of electromigration for eutectic SnPb solder stripe," Applied Physics Letters 88, 182105 (2006).
[42] R. Agarwal, S. E. Ou, and K. N. Tu, "Electromigration and critical product in eutectic SnPb solder lines at 100 °C," Journal of Applied Physics 100, 024909 (2006).
[43] Y. C. Hsu, D. C. Chen, P. C. Liu, and C. Chen, "Measurement of electromigration parameters of lead-free SnAg3.5 solder using U-groove lines," Journal of Materials Research 20, 2831 (2011).
[44] C. C. Wei, C. F. Chen, P. C. Liu, and C. Chen, "Electromigration in Sn–Cu intermetallic compounds," Journal of Applied Physics 105, 023715 (2009).
[45] M. A. Korhonen, P. Bo/rgesen, K. N. Tu, and CheYu Li, "Stress evolution due to electromigration in confined metal lines, " Journal of Applied Physics 73, 3790 (1993).
[46] Shengquan Ou and K. N. Tu, "A study of electromigration in Sn3.5Ag and Sn3.8Ag0.7Cu solder lines, " Electronic Components and Technology Conference, 1445 (2005).
[47] L. Xu, J. H. L. Pang, and K. N. Tu, "Effect of electromigration-induced back stress gradient on nanoindentation marker movement in SnAgCu solder joints," Applied Physics Letters 89, 221909 (2006).
[48] J. K. Han, D. Choi, M. Fujiyoshi, N. Chiwata, and K. N. Tu, "Current density redistribution from no current crowding to current crowding in Pb-free solder joints with an extremely thick Cu layer," Acta Materialia 60, 102 (2012).
[49] F. Y. Ouyang, K. Chen, K. N. Tu, and Y. S. Lai, "Effect of current crowding on whisker growth at the anode in flip chip solder joints," Applied Physics Letters 91, 231919 (2007).
[50] K. Chen, N. Tamura, M. Kunz, K. N. Tu, and Y. S. Lai, "In situ measurement of electromigration-induced transient stress in Pb-free Sn–Cu solder joints by synchrotron radiation based x-ray polychromatic microdiffraction," Journal of Applied Physics 106, 023502 (2009).
[51] C. Kinney, X. Linares, K. O. Lee, and J. W. Morris, "The effect of Sn orientation on intermetallic compound growth in idealized Sn-Cu-Ag interconnects," Journal of Electronic Materials 42, 607 (2013).
[52] K. Lee, K. S. Kim, Y. Tsukada, K. Suganuma, K. Yamanaka, S. Kuritani, et al., "Effects of the crystallographic orientation of Sn on the electromigration of Cu/Sn–Ag–Cu/Cu ball joints," Journal of Materials Research 26, 467 (2011).
[53] M. Lu, D. Y. Shih, P. Lauro, C. Goldsmith, and D. W. Henderson, "Effect of Sn grain orientation on electromigration degradation mechanism in high Sn-based Pb-free solders," Applied Physics Letters 92, 211909 (2008).
[54] T. C. Huang, T. L. Yang, J. H. Ke, C. H. Hsueh, and C. R. Kao, "Effects of Sn grain orientation on substrate dissolution and intermetallic precipitation in solder joints under electron current stressing," Scripta Materialia 80, 37 (2014).
[55] Y. Wang, S. H. Chae, J. Im, and P. S. Ho, "Kinetic study of intermetallic growth and its reliability implications in Pb-free Sn-based microbumps in 3D integration," Electronic Components and Technology Conference, 1953 (2013).
[56] H. Y. Chuang, W. M. Chen, W. L. Shih, Y. S. Lai and C. R. Kao, "Critical new issues relating to interfacial reactions arising from low solder volume in 3D IC packaging, " Electronic Components and Technology Conference, 1723 (2011).
[57] W. Y. Chen, W. Tu, H. C. Chang, T. T. Chou, and J. G. Duh, "Growth orientation of Cu–Sn IMC in Cu/Sn–3.5Ag/Cu–xZn microbumps and Zn-doped solder joints," Materials Letters 134, 184 (2014).
[58] H. W. Lin, C. L. Lu, C. M. Liu, C. Chen, D. Chen, J. C. Kuo, et al., "Microstructure control of unidirectional growth of η-Cu6Sn5 in microbumps on〈111〉oriented and nanotwinned Cu," Acta Materialia 61, 4910 (2013).
[59] H. F. Zou and Z. F. Zhang, "Application of electron backscatter diffraction to the study on orientation distribution of intermetallic compounds at heterogeneous interfaces (Sn/Ag and Sn/Cu)," Journal of Applied Physics 108, 103518 (2010).
[60] R. Zhang, Y. Tian, C. Hang, B. Liu, and C. Wang, "Formation mechanism and orientation of Cu3Sn grains in Cu–Sn intermetallic compound joints," Materials Letter 110, 137 (2013).
[61] S. J. Wang, L. H. Hsu, N. K. Wang, and C. E. Ho, "EBSD Investigation of Cu-Sn IMC Microstructural Evolution in Cu/Sn-Ag/Cu Microbumps During Isothermal Annealing," Journal of Electronic Materials 43, 219 (2013).
[62] Y. Tian, L. Niu, and C. Wang, "Analysis of Cu6Sn5 grain orientations in Sn3.0Ag0.5Cu lead-free solder joints," International Conference on Electronic Packaging Technology & High Density Packaging, 353 (2011).
[63] H. F. Zou, H. J. Yang, and Z. F. Zhang, "Controlling the morphology and orientation of Cu6Sn5 through designing the orientations of Cu single crystals, " International Conference on Electronic Packaging Technology & High Density Packaging, 1212 (2009).
[64] W. Jeitschko, and B. Jaberg, "Structure refinement of Ni3Sn4," Acta Cryst B38, 598 (1982).
[65] H. Yang and C. T. Prewitt, "On the crystal structure of pseudowollastonite (CaSiO3)," American Mineralogist 84, 929 (1999).
[66] A. Tasooji, L. Lara, and K. Lee, "Effect of grain boundary misorientation on electromigration in lead-free solder joints," Journal of Electronic Materials 43, 4386 (2014).
[67] H. Y. Chen and C. Chen, "Thermomigration of Cu–Sn and Ni–Sn intermetallic compounds during electromigration in Pb-free SnAg solder joints," Journal of Materials Research 26, 983 (2011).
[68] L. D. Chen, M. L. Huang, and S. M. Zhou, "Effect of electromigration on intermetallic compound formation in line-type Cu/Sn/Cu interconnect," Journal of Alloys and Compounds 504, 535(2010).
[69] C. T. Lu, Y. J. Hu, Y. S. Liu, T. S. Huang, H. W. Tseng, C. Y. Chen, et al., "Effective charge number of Cu in Cu-Sn compound," ECS Solid State Letters 1, 73 (2012).
[70] H. Gan and K. N. Tu, "Polarity effect of electromigration on kinetics of intermetallic compound formation in Pb-free solder V-groove samples," Journal of Applied Physics 97, 063514 (2005).
[71] J. R. Huang, C. M. Tsai, Y. W. Lin, and C. R. Kao, "Pronounced electromigration of Cu in molten Sn-based solders," Journal of Materials Research 23, 250 (2011).
[72] T. L. Yang, J. H. Ke, W. L. Shih, Y. S. Lai, and C. R. Kao, "Serrated cathode dissolution under high current density: Morphology and root cause," Journal of Applied Physics 114, 053501 (2013).
[73] L. Xu, J. K. Han, J. J. Liang, K. N. Tu, and Y. S. Lai, "Electromigration induced high fraction of compound formation in SnAgCu flip chip solder joints with copper column," Applied Physics Letters 92, 262104 (2008).
[74] X. Gu, K. Ding, J, Cai, L, Kong, "Electromigration and thermomigration in Sn3Ag0.5Cu solder joints," International Conference on Electronic Packaging Technology & High Density Packaging, 1273 (2010).
[75] F. H. Huang and H. B. Huntington, "Diffusion of Sb124, Cd109, Sn113, and Zn65 in tin," Physical Review B 9, 1479 (1974).
[76] B. F. Dyson, "Interstitial diffusion of copper in tin," Journal of Applied Physics 38, 3408 (1967).
[77] A. Paul, C. Ghosh, and W. J. Boettinger, "Diffusion parameters and growth mechanism of phases in the Cu-Sn system," Metallurgical and Materials Transactions A 42, 952 (2011).
[78] D. C. Yeh and H. B. Huntington, "Extreme fast-diffusion system: nickel in single-crystal tin," Physical Review Letters 53, 1469 (1984).
[79] H. P. R. Frederikse, R. J. Fields, and A. Feldman, "Thermal and electrical properties of copper-tin and nickel-tin intermetallics," Journal of Applied Physics 72, 2879 (1992).
[80] Mona, A. Kumar, and Z. Chen, "Influence of phosphorus content on the interfacial microstructure between Sn–3.5 Ag solder and electroless Ni–P metallization on Cu substrate," Transactions on Advanced Packaging 30, 1 (2007).
[81] T. C. Chiu and K. L. Lin, "The difference in the types of intermetallic compound formed between the cathode and anode of an Sn–Ag–Cu solder joint under current stressing," Intermetallics 17, 1105 (2009).
[82] Y. C. Hsu, C. K. Chou, P. C. Liu, C. Chen, D. J. Yao, T. Chou, et al., "Electromigration in Pb-free SnAg3.8Cu0.7 solder stripes," Journal of Applied Physics 98, 033523 (2005).
[83] H. K. Kim and K. N. Tu, "Kinetic analysis of the soldering reaction between eutectic SnPb alloy and Cu accompanied by ripening," Physical Review B 53, 16027 (1996).
[84] D. Gur and M. Bamberger, "Reactive isothermal solidification in the Ni-Sn system," Acta Materials 46, 4917 (1998).
[85] J. Han, H. Chen and M. Li, "Role of grain orientation in the failure of Sn-based solder joints under thermomechanical fatigue, " Acta Metall. Sin.(Engl. Lett.) 25, 214 (2012).
[86] C. N. Chen, B. Z. Chen, W. H. Wu, and C. E. Ho, "Correlation between Ag content and Cu pad consumption in lead-free solder joints under electrom current stressing," International Conference on Electronic Packaging Technology & High Density Packaging, 846 (2011).
[87] M. A. Korhonen, P. Bo/rgesen, K. N. Tu, and C. Y. Li, "Stress evolution due to electromigrationin cofined metal lines," Journal of Applied Physics 73, 3790 (1933).
[88] J. S. Kim, P. J. Wang, and C. C. Lee, "Ag-copper structure for bonding large semicondutor chips," Transactions on Components and Packaging Technology 31, 875 (2008).
[89] S. H. Wu, Y. J. Hu, C. T. Lu, T. S. Huang, Y. H. Chang, and C. Y. Liu, "Electromigration study on Sn(Cu) solder/Ni(P) joint interfaces," Journal of Electronic Materials 41, 3342 (2012).
[90] M. Schaefer, R. A. Fournelle, J. Liang, "Theory for intermetallic phase growth between Cu and liquid Sn-Pb solder based on grain boundary diffusion control," Journal of Electronic Materials 27, 1167 (1998).
[91] J. C. E. Mertens, A. Kirubanandham, and N. Chawla, "Electromigration mechanisms in Sn-0.7Cu/Cu couples by four dimensional (4D) X-ray microtomography and electron backscatter diffraction (EBSD)," Acta Materialia 102, 220 (2016).
[92] C. E. Ho, C. H. Yang, and L. H. Hsu, "Electromigration in thin-film solder joints," Surface and Coatings Technology 259, 257 (2014).
[93] J. A. Van Beek, S. A. Stolk and F. J. J. Van Loo "Multiphase diffusion in the systems Fe-Sn and Ni-Sn," Alloys & Coatings 73, 439 (1982).
[94] P. Liu, A. Overson and D. Goyal, "Key Parameters for fast Ni dissolution during electromigration of Sn0.7Cu Solder Joint," Electronic Components & Technology Conference, 99 (2015).
[95] A. T. Wu, K. N. Tu, J. R. Lloyd, N. Tamura, B. C. Valek, and C. R. Kao, "Electromigration-induced microstructure evolution in tin studied by synchrotron x-ray microdiffraction," Applied Physics Letters 85, 2490 (2004).
[96] Y. A. Shen and C. Chen, "Study of grain size and orientation of 30 μm solder microbumps bonded by thermal compression," International Microsystems, Packaging, Assembly and Circuics Technology Conference, 204 (2015).
[97] Y. Wang, K. H. Lu, V. Gupta, L. Stiborek, D. Shirley, S. H. Chae, et al., "Effects of Sn grain structure on the electromigration of Sn-Ag solder joints," Journal of Materials Research 27, 1131 (2012).
[98] H. Cerica, R. L. de Oriob, and S. Selberherr, "TCAD study of electromigration failure modes in Sn-Based solder bumps," International Conference on Simulation of Semiconductor Processes Devices, 264 (2012).
[99] M. Lu, H. Zhang, "Influence of UBM metallurgy on Sn textures and EM Failure," Electronic Components & Technology Conference, 1785 (2015).
[100] C. C. Wei, C. H. Yu, C. H. Tung, R. Y. Huang, C. C. Hsieh, C. C. Chiu, H.Y. Hsiao, et al., "Comparison of the electromigration behaviors between micro-bumps and C4 solder bumps," Electronic Components & Technology Conference, 706 (2011).
[101] Y. W. Chang, C. Chen, T. C. Chang, C. J. Zhan, J. Y. Juang, and A. T. Huang, "Fast phase transformation due to electromigration of 18 μm microbumps in three-dimensional integrated-circuit integration," Materials Letters 137, 136 (2014).
[102] Y. M. Lin, C. J. Zhan, J. Y. Juang, J. H. Lau, T. H. Chen, R. Lo, M. Kao, T. Tian, K. N. Tu, "Electromigration in Ni/Sn intermetallic micro bump joint for 3D IC chip stacking," Electronic Components and Technology Conference, 351 (2011).
[103] Y. Wang, S. H. Chae, R. Dunne, Y. Takahashi, K. Mawatari, P. Steinmann, T. Bonifield, T. Jiang, J. Im, and P. S. Ho, "Effect of intermetallic formation on electromigration reliability of TSV-microbump joints in 3D interconnect, " Electronic Components and Technology Conference, 319 (2012). |