鋁合金鈑片快塑成形(QPF)技術發展之探討

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：65

、訪客IP：3.133.135.8

姓名

翁清浚(Ching-Chung Weng) 查詢紙本館藏

畢業系所

機械工程學系在職專班

論文名稱

鋁合金鈑片快塑成形(QPF)技術發展之探討
(A Study of the Technology Development of Quick Plastic Forming (QPF) for Aluminum Alloy Sheet)

相關論文

★ 使用實驗計劃法求得印刷電路板微鑽針最佳鑽孔參數	★ 滾針軸承保持架用材料之電鍍氫脆研究
★ 強制氧化及熱機處理對鎂合金AZ91D固相回收製程之研究	★ 滾針軸承保持架圓角修正之有限元素分析
★ 透過乾式蝕刻製作新型鍺全包覆式閘極電晶體元件	★ 窗型球柵陣列構裝翹曲及熱應力分析
★ 冷軋延對ZK60擠製材的拉伸與疲勞性質之影響	★ 熱引伸輔助超塑成形製作機翼整流罩之設計及分析
★ 超塑性鋁合金5083用於機翼前緣整流罩之研究	★ 輕合金輪圈疲勞測試與分析
★ 滾針軸承保持架之有限元分析	★ 鎂合金之晶粒細化與超塑性研究
★ 平板式固態氧化物燃料電池穩態熱應力分析	★ 固態氧化物燃料電池連接板電漿鍍膜特性研究
★ 7XXX系鋁合金添加Sc之顯微組織與機械性質研究	★ 高延性鎂合金之特性及成形性研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

超塑成形(Superplastic Forming, SPF)工法已有多年被成熟的使用在航太產業，然在推廣至汽車製造業，因為生產速度慢無法普及量產。此時由美國通用汽車公司(General Motors, GM)以超塑成形為基底而開發一種名為快塑成形(Quick Plastic Forming, QPF)的實用技術，並且成功運用在其鋁合金車身鈑片零件之生產製程上。
「汽車車身輕量化」蔚為各國汽車業者的共同發展趨勢，其不二法門為採用高強度薄鋼片、鋁合金、複合材料或鎂合金，後二者似乎還不實際，而前二者之彼此競爭力應尚無定論。所以鋁合金已成車身材料的主要選項，而開發可行的鋁合金成形技術是有其相對的重要性與成本效益，因此美國通用汽車在開發快塑成形技術之重要歷程與經驗是值得吾人深入瞭解與借鏡的。
鑑於國內學界或汽車業者對快塑成形技術基本上並無著墨，本研究即著眼於此，也針對國內未來的可能需要，透過大量初級、次級文獻整理方式，全面性且有系統地將快塑成形之發展歷程、技術特色及重要成果等予以探討與歸納分析，並提出後續研究的建議方向，期能提供國內有意開發的產業與後繼研究群參酌與運用。

摘要(英)

The technology of "Superplastic Forming" was used ripely in the aerospace industry for many years. However, it extended to the automotive industry but cannot application generally because its production is slow. At this time, a practical technology in foundation of superplastic forming was developed by U.S. General Motors and called " Quick Plastic Forming, QPF", as well as it was used successfully to the production process for automobile body parts with aluminum alloy.
Fortunately "automotive body lightweight" is already the common trend of development by the automobile industry in various countries. The only way is that them are made by high-strength thin steel, aluminum alloy, composite or magnesium alloy. The latter two donot seem real, and the competitiveness of each of the first two should be inconclusive.So aluminum alloy among others has become the main options of materials for automobile body. The development of a viable forming technology for aluminum alloy is importance and cost-effectiveness relatively. Therefore, the important course and experience of technology development of QPF by U.S. General Motors is deserved to understanding and learning deeply.
In view of the domestic academia or automobile industry does not research to QPF basically, wherefore the present study is based on this view and prepares for domestic possible requirement in the future. Through a large number of primary and secondary literature review mode, the development, technical features and important achievement of QPF are investigated and inductive analyzed. In addition to propose the suggests for future research direction, the present study expects to provide that domestic interested industries and following researchers deliberate and apply.

關鍵字(中)

★ 快塑成形(QPF)
★ 鋁合金鈑片
★ 通用汽車(GM)

關鍵字(英)

★ Quick Plastic Forming (QPF)
★ Aluminum Alloy Sheet
★ General Motors (GM)

論文目次

摘要 v
Abstract vi
誌謝 vii
目錄 viii
圖目錄 x
表目錄 xii
符號說明 xiii
第一章：緒論 1
1-1 前言 1
1-2 研究動機與目的 3
1-3 研究架構 5
第二章：資料蒐集方法 7
2-1 網路搜尋引擎 7
2-2 其它參考網站 12
2-3 關鍵字檢索 16
第三章：結果與討論 17
3-1 快塑成形開發機緣與經過 17
3-2 快塑成形變形機制 21
3-3 快塑成形處理流程 24
3-4 快塑成形與超塑成形之差異 27
3-5 快塑成形材料開發 29
3-6 快塑成形整體加熱模具系統 33
3-7 快塑成形潤滑作業 37
3-8 快塑成形應用實績 40
3-9 快塑成形後續可能發展 42
第四章：結論與未來展望 49
4-1 結論 49
4-2 未來展望 51
參考文獻 53

參考文獻

﹝1﹞Alan I. Taub, Paul E. Krajewski, Alan A. Luo, John N. Owens, "The Evolution of Technology for Materials Processing over the Last 50 Years: The Automotive Example", JOM, Vol 59, 2, pp.48–57, 2007.
﹝2﹞Joseph Carpenter, Mark T. Smith, "Quick Plastic Forming of Aluminum Sheet Metal”, Energy Efficiency and Renewable Energy, December 2005.
﹝3﹞Mary Anne Kulas, Paul E. Krajewski, John R. Bradley, Eric M. Taleff, "Forming Limit Diagrams for AA5083 under SPF and QPF Conditions", Materials Science Forum, Vol 551-552, pp.129-134, 2007.
﹝4﹞王俊永，「超塑成形(SPF)與快塑成形(QPF)在台灣40年之研究開發經過」，國立中央大學，碩士論文，31-33頁，民國104年。
﹝5﹞Moinuddin Sirdar Rashid, Chongmin Kim, Edward Frank Ryntz, Frederick Irvin Saunders, Ravi Verma, Sooho Kim, "Quick plastic forming of aluminum alloy sheet metal", U. S. Patent, No. 6253588 B1, 2001.
﹝6﹞Richard Murray Kleber, Nelson T. Brinas, Dana W. Moore, Donald L. Kenyon, Joseph B. Harris, "Panel extraction assist for superplastic and quick plastic forming equipment ", U. S. Patent, No. 6615631 B2, 2003.
﹝7﹞Arianna T. Morales, "Coating for superplastic and quick plastic forming tool and process of using", U. S. Patent, No. 6655181 B2, 2003.
﹝8﹞Chongmin Kim, Gary A. Kruger, "High throughput quick-plastic-forming ", U. S. Patent, No. 7028519 B2, 2006.
﹝9﹞Richard H. Hammar, Gary A. Kruger, James G. Schroth, Edward W. Bennett, Curtis L. Shinabarker, "Hot die cleaning system for quick plastic forming cell", U. S. Patent, No. 7204110 B2, 2007.
﹝10﹞Sydney Coleman, Bruce Goodreau, "Lubricant for quick plastic forming of aluminum sheet", U. S. Patent, No. 0262120 A1, 2007.
﹝11﹞Gary A. Kruger, Chongmin Kim, Richard H. Hammar, "Method for vaccum assisted preforming of superplastically or quick plastically formed article", U. S. Patent, No. 7363790 B2, 2008.
﹝12﹞Richard H. Hammar, Richard M. Kleber, Gary A. Kruger, "Open press thermal gap for QPF forming tools", U. S. Patent, No. 7823430 B2, 2010.
﹝13﹞Moinuddin S. Rashid, Chongmin Kim, Edward F. Ryntz, Frederick I. Saunders, Ravi Verma, Sooho Kim, Paul E. Krajewski, "Quick plastic forming of aluminum alloy sheet metal", U. S. Patent, No. RE43012 E, 2011.
﹝14﹞Paul E. Krajewski, James G. Schroth, " Overview of Quick Plastic Forming Technology", Materials Science Forum, Vol 551-552, pp.3–12, Jul. 2007.
﹝15﹞James G. Schroth, Hans M. Brueggeman, Narinder P. Grewal, "Quick Plastically Formed Aluminum Doors: Design and Performance", Journal of Materials Engineering and Performance , Vol 16, pp.339–348, 2007.
﹝16﹞P. E. Krajewski and J. G. Schroth, Superplastic Forming of Advanced Metallic Materials: Methods and Applications, Woodhead Publishing Limited.,2011.
﹝17﹞曾文丁，柏雪翠，「我國下一階段汽車能耗管理制度介紹」，機械工業雜誌，第385期，28~41頁，2015。
﹝18﹞蕭瑞聖，「汽車輕質合金零組件應用與廠商機會」，工業材料雜誌，第340期，42~50頁，2015。
﹝19﹞吳其涎，「電動汽車產業發展模式研究-以中國大陸市場為例」，國立交通大學，碩士論文，89-90頁，民國101年。
﹝20﹞Jürgen HIRSCH, "Recent development in aluminium for automotive applications”, Transactions of Nonferrous Metals Society of China, Vol 24, pp.1995–2002, 2014.
﹝21﹞R. Boissiere, S. Terzi, J. J. Blandin and L. Salvo "Quick-Plastic forming: similarities and differences with Super-Plastic forming", 6th EUROSPF Conference, pp.1-2, Carcassonne, France, 3-5 September 2008.
﹝22﹞金泉林，「鋁合金車身板件超塑成形技術探討」，MC 現代零部件，第3期，38~43頁，2011。
﹝23﹞J. C. Benedyk, Materials, Design and Manufacturing for Lightweight Vehicles, Woodhead Publishing Limited.,2010.
﹝24﹞孫稟厚,「鎂合金AZ31細晶薄板片拉伸性質與氣壓成形特性研究」,國立中央大學，博士論文，21-23頁，民國100年。
﹝25﹞David E. Cipoletti, Allan F. Bower, Yue Qi, Paul E. Krajewski, "The Influence of Hterogeneity in Grain Boundary Sliding Resistance on The Constitutive Behavior of AA5083 During High-Temperature Deformation", Materials Science and Engineering A, 504, pp.175–182, 2009.
﹝26﹞J. R. Bradley, "Bulge testing of superplastic AA5083 aluminum sheet", Advances in Superplasticity and Superplastic Forming by TMS, pp.109–118, Charlotte, NC, 2004.
﹝27﹞張凱鋒，王國峰，先進材料超塑成形技術，科學出版社，北京市，2012年。
﹝28﹞梁孝祖，2014 非鐵新興市場特輯－鋁金屬篇，經濟部技術處產業技術知識服務計畫(ITIS)，台北市，民國103年。
﹝29﹞日本アルミニウム協会, "自動車とアルミ", アルミエージ, pp.2–9, 2015.
﹝30﹞日本アルミニウム協会, "平成26年度欧州自動車のアルミ化動向調査報告", アルミニウム, Vol 22, No.92, pp.22–32, 2015.
﹝31﹞吳曉煒等8員，「鋁合金覆蓋件快速超塑性成形技術」，塑性工程學報，第19卷，第1期，1~5頁，2012。
﹝32﹞Verma, R. , Carter, J. , "Quick Plastic Forming of a Decklid Inner Panel with Commercial AZ31 Magnesium Sheet", Journal of Materials and Manufacturing, April 2006.
﹝33﹞薛乃綺，「汽車用材料的變化與未來趨勢」，工業材料雜誌，第314期，131~137頁，2013。

指導教授

李雄(Shyong Lee)

審核日期

2016-4-13

推文