參考文獻 |
[1]Kim, H., Son, J., Lee, J.: ‘A high-speed sliding-mode observer for the sensorless speed control of a PMSM’, IEEE Trans. Ind. Electron., 2011, 58, (9), pp. 4069–4077
[2]Kim, S., Yoon, Y.D., Sul, S.K., Ide, K.: ‘Maximum torque per ampere (MTPA) control of an IPM machine based on signal injection considering inductance saturation’, IEEE Trans. Power Electron., 2013, 28, (1), pp. 488–497
[3]Kazerooni, M., Hamidifar, S., Kar, N.C.: ‘Analytical modelling and parameter sensitivity analysis for the PMSM steady-state performance prediction’, IET Electr. Power Appl., 2013, 7, (7), pp. 586–596
[4]Lin, F.J., Hung, Y.C., Chen, J.M., Yeh, C.M.: ‘Sensorless IPMSM drive system using saliency back-EMF-based intelligent torque observer with MTPA control’, IEEE Trans. Ind. Informat., 2014, 10, (2), pp. 1226–1241
[5]Lemmens, J., Vanassche, P., Driesen, J.: ‘PMSM drive current and voltage limiting as a constraint optimal control problem’, IEEE J. Emerg. Sel. Topics Power Electron., 2014, 3, (2), pp. 326–338
[6]Sun, T., Wang, J., Chen, X.: ‘Maximum torque per ampere (MTPA) control for interior permanent magnet synchronous machine drives based on virtual signal injection’, IEEE Trans. Power Electron., 2015, 30, (9), pp. 5036–5045
[7]Shi, Y., Sun, K., Huang, L., Li, Y., Xiao, X.: ‘Control of interior permanent magnet synchronous motor drives with cyclic fluctuating load’, 15th international Conference on Electrical Machines and Systems (ICEMS), 2012, pp. 1–5
[8]Bolognani, S., Petrella, R., Prearo, A., Sgarbossa, L.: ‘Automatic tracking of MTPA trajectory in IPM motor drives based on AC current injection’, IEEE Trans. Ind. Appl., 2011, 47, (1), pp. 105–114
[9]Antonello, R., Carraro, M., Zigliotto, M.: ‘Maximum-torque-per-ampere operation of anisotropic synchronous permanent-magnet motors based on extremum seeking control’, IEEE Trans. Ind. Electron., 2014, 61, (9), pp. 5086–5093
[10]Sun, T., Wang, J.: ‘Extension of virtual signal injection based MTPA control for interior permanent magnet synchronous machine drives into field weakening region’, IEEE Trans. Ind. Electron., 2015, 62, (11), pp. 6809–6817
[11]Do, T.D., Kwak, S., Choi, H.H., Jung, J.W.: ‘Suboptimal control scheme design for interior permanent magnet synchronous motors: An SDRE-based approach’, IEEE Trans. Power Electron., 2014, 29, (6), pp. 3020–3031
[12]Su, Y.X., Zheng, C.H., Duan, B.Y.: ‘Automatic disturbances rejection controller for precise motion control of permanent-magnet synchronous motors’, IEEE Trans. Ind. Electron., 2005, 52, (3), pp. 814–823
[13]Li, J., Ren, H.P., Zhong Y.R.: ‘Robust speed control of induction motor drives using first-order auto-disturbance rejection controllers’, IEEE Trans. Ind. Appl., 2015, 51, (1), pp. 712–720
[14]Choi, H.H., Vu, N.T.T., Jung, J.W.: ‘Digital implementation of an adaptive speed regulator for a PMSM’, IEEE Trans. Power Electron., 2011, 26, (1), pp. 3–8
[15]Li, W., Hori, Y.: ‘Vibration suppression using single neuron-based PI fuzzy controller and fractional-order disturbance observer’, IEEE Trans. Ind. Electron., 2007, 54, (1), pp. 117–126
[16]Huang, W.S., Liu, C.W., Hsu, P.L., Yeh, S.S.: ‘Precision control and compensation of servomotors and machine tools via the disturbance observer’, IEEE Trans. Ind. Electron., 2010, 57, (1), pp. 420–429
[17]Yoon, Y.D., Jung, E., Sul, S.K.: ‘Application of a disturbance observer for a relative position control system’, IEEE Trans. Ind. Appl., 2010, 46, (2), pp. 849–856
[18]Ruderman, M., Ruderman, A., Bertram, T.: ‘Observer-based compensation of additive periodic torque disturbances in permanent magnet motors’, IEEE Trans. Ind. Informat., 2013, 9, (2), pp. 1130–1138
[19]Lin, F.J.: ‘Real-time IP position controller design with torque feedforward control for PM synchronous motor’, IEEE Trans. Ind. Electron., 1997, 44, (3), pp. 398–407
[20]Elman, J.L.: ‘Finding structure in time’, Cognitive Sci., 1990, 14, pp. 179–211
[21]Chen, W., Gong, Q., Yin, C., Wang, T.: ‘An Elman neural network application on dynamic equivalents of power system’, Conf. on Electrical and Control Engineering (ICECE), 2010, pp376-379
[22]Liang, Y.C.: ‘Application of Elman neural network in short-term load forecasting’, Conf. on Artificial Intelligence and Computational Intelligence (AICI), 2010, pp.141-144
[23]Niu, L., Xu, D., Yang, M., Gui, X., Liu, Z.: ‘On-line inertia identification algorithm for PI parameters optimization in speed loop’, IEEE Trans. Power Electron., 2015, 30, (2), pp. 849–858
[24]高子胤,「以反電動勢為基礎之比例積分微分類神經網路估測器之無感測器變頻壓縮機驅動系統開發」,中央大學電機工程系,碩士論文,民國100年7月。
[25]Microchip,MCP4922 datasheet.
[26]瑞智精密股份有限公司, http://www.rechi.com
[27]劉昌煥,「交流電機控制」,東華書局,民國92年。
[28]Texas Instruments,AM26LS32ACN datasheet.
[29]Lin, F.J.: ‘Robust speed controlled induction motor drive using EKF and RLS estimation’, Proc. Inst. Electr. Eng.—Elect. Power Appl., 1996, 143, (3), pp. 186–192
[30]Yang, S.H., Lorenz, R.D.: ‘Surface permanent-magnet machine self-sensing at zero and low speeds using improved observer for position, velocity, and disturbance torque estimation’, IEEE Trans. Ind. Appl., 2012, 48, (1), pp. 151-160
[31]陳家銘,「以單一直流鏈電流感測器結合低轉速轉矩補償之無轉軸位置感測器變頻壓縮機驅動系統開發」,中央大學電機工程系,碩士論文,民國102年6月。
[32]Mohamed, S.Z., Mahmoud, A.M., Shokry, S.S.: ‘High dynamic performance of interior permanent magnet synchronous motor drives based on feed-forward load torque compensator’, Electric Power Components and Systems, 2012, 41, (3), pp. 235-251
[33]Hong, K., Nam, K.: ‘A load torque compensation scheme under the speed measurement delay’, IEEE Trans. Ind. Electron., 1998, 45, (2) pp. 283-290
[34]Zhang, Y., Akujuobi, C.M., Ali, H.W.: ‘Load disturbance resistance speed controller design for PMSM’, IEEE Trans. Ind. Electron., 2006, 53, (4), pp.1198-1208
[35]蔡佳宏,「利用智慧型控制之併網型鼠籠式感應風力發電系統」,中央大學電機工程學系,碩士論文,民國104年6月
[36]Lin, F.J., Huang Y.S., Tan K.H., Chang Y.R.: ‘Active islanding detection method via current injection disturbance using Elman neural network’, Chinese Institute of Engineers, 2015, 38, (4), pp.517-535
[37]李毓彥,「以微控器研製永磁同步馬達的向量控制驅動器」,台北科技大學電機工程系,碩士論文,民國98年6月 |