新式微小化雙頻微波被動電路

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：66

、訪客IP：18.222.107.128

姓名

張恩維(En-Wei Chang) 查詢紙本館藏

畢業系所

電機工程學系

論文名稱

新式微小化雙頻微波被動電路
(Novel Dual-Band Miniature Microwave Passive Circuit)

相關論文

★ 用於行動上網裝置之智慧型陣列天線	★ 吸收式帶止濾波器之研製
★ 一維及二維切換式波束掃描陣列天線	★ 寬頻微型化六埠網路接收機
★ 具有良好選擇度的寬頻吸收式帶止濾波器	★ 微小化吸收式帶止濾波器之通帶改善
★ 共面波導帶通濾波器之研製	★ 微帶耦合線帶通濾波器與雙工器研製
★ 宇宙微波背景輻射陣列望遠鏡接收機之校準信號源研製	★ K-Band及Q-Band毫米波帶通濾波器設計
★ 薄膜製程射頻被動元件設計	★ 微波帶通低雜訊放大器設計
★ 積體式微波帶通濾波器之研製	★ 應用於高位元率無線傳輸系統之V頻段漸進式開槽天線陣列
★ 以多重耦合線實現多功能帶通濾波器	★ 以單刀雙擲帶通濾波器實現高整合度射頻前端收發系統

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本論文以被動電路微小化與積體化為目標，並以縮小尺寸且同時具備雙頻特性為設計主軸。相較於以傳統橋式T線圈取代傳輸線的設計方式，僅可作單頻之應用，本研究提出以雙頻橋式T線圈替代傳統橋式T線圈，而能將電路轉換為雙頻設計，且同時達到微小化目的，並應用於微小化雙頻直交分合波器、雙頻威爾京生功率分配器與三頻吸收式帶止濾波器之設計。於電路實現上，則使用電感與平行板電容，於氮化鎵(GaN)、砷化鎵(GaAs)與積體被動元件(IPD)製程中實現。
首先，以積體被動元件製程實現微小化雙頻直交分合波器與雙頻威爾京生功率分配器，中心頻率分別為2.45 GHz與5.5 GHz，其中雙頻直交分合波器於兩中心頻率下之電氣尺寸分別為0.0123〖 λ〗_0×0.0245〖 λ〗_0 及0.0275〖 λ〗_0×0.055〖 λ〗_0，而雙頻威爾京生功率分配器於兩中心頻率下之尺寸分別為0.0145〖 λ〗_0×0.0133〖 λ〗_0 及0.0333〖 λ〗_0×0.0305〖 λ〗_0，均較暨有設計大幅縮小。
其次，分別以兩種不同製程實現微小化三頻吸收式帶止濾波器。首先以傳統橋式T線圈設計單頻7.2 GHz吸收式帶止濾波器，再以雙頻橋式T線圈設計雙頻吸收式帶止濾波器，中心頻率分別為4.8 GHz與9.6 GHz，最後串接成一個三頻吸收式帶止濾波器，三個止帶頻率分別為4.8 GHz、7.2 GHz與9.6 GHz，其中以積體被動元件製程實現之電路於三個止帶頻率下之尺寸分別為0.038 λ_0×0.04〖 λ〗_0、0.058 λ_0×0.06 λ_0 及0.077〖 λ〗_0×0.08〖 λ〗_0，而以砷化鎵製程實現之電路於三個止帶頻率下之尺寸分別為0.0272〖 λ〗_0×0.0368〖 λ〗_0、0.0407〖 λ〗_0×0.0552〖 λ〗_0 及0.0543〖 λ〗_0×0.0736〖 λ〗_0，電路面積皆小於現有之設計。上述應用電路證實雙頻橋式T線圈架構的確能對被動電路面積有大幅度的尺寸縮減，且可簡單地實現雙頻操作之特性。

摘要(英)

In this thesis, very compact integrated passive circuits with high performance are presented. Today, the wireless communication system for multi-band demand is increasing. Therefore, more and more multi-band circuit of the basic components or subsystem design concept was presented in the recent year. However, the major bottleneck of the size reduction of active and passive microwave circuits is the requirement of multiple transmission lines with given electrical length. The traditional bridge T-coil will be equivalent to the transmission line, but only for single-frequency applications. In this work, the dual-band bridged T-coil is used to replace the conventional bridged T-coil, can be used in dual-band microwave passive circuit design, and While achieving the purpose of minimization. The dual-band bridged T-coil can be implemented using inductor and metal-insulator-metal (MIM) capacitor in GaN semiconductor and GaAs semiconductor IC process or Integrated Passive Device (IPD) process to achieve very compact size. It is then applied to the design of m Miniature dual-band branch-line coupler, dual-band Wilkinson power divider, and a triple-band absorptive band-stop filter (ABSF).
First of all, the proposed Miniature dual-band branch-line coupler and dual-band Wilkinson power divider are fabricated in IPD process. The center frequency of both are 2.45 GHz and 5.5 GHz. The circuit size of Miniature dual-band branch-line coupler is 0.0123〖 λ〗_0×0.0245〖 λ〗_0 at 2.45 GHz, 0.0275〖 λ〗_0×0.055〖 λ〗_0 at 5.5 GHz. And the circuit size of Miniature dual-band Wilkinson power divider is 0.0145〖 λ〗_0×0.0133〖 λ〗_0 at 2.45 GHz, 0.0333〖 λ〗_0×0.0305〖 λ〗_0 at 5.5 GHz.
Finally, the proposed Miniature triple-band ABSF is fabricated in two different process. At first, a single-band 7.2 GHz ABSF was designed with a conventional bridge T-coil, then a dual-band ABSF was designed with a dual-band bridge T-coil. The center frequency of dual-band ABSF was 4.8 GHz and 9.6 GHz. In the last, I cascade two filter which I described to a triple-band ABSF. The stop-band frequency of triple-band ABSF was 4.8 GHz, 7.2 GHz and 9.6 GHz. The circuit size of triple-band ABSF which is fabricated in IPD process is 0.038〖 λ〗_0×0.04〖 λ〗_0 at 4.8 GHz, 0.058〖 λ〗_0×0.06〖 λ〗_0 at 7.2 GHz and 0.077〖 λ〗_0×0.08〖 λ〗_0 at 9.6 GHz. And the circuit size of triple-band ABSF which is fabricated in GaAs semiconductor IC process is 0.0272〖 λ〗_0×0.0368〖 λ〗_0 at 4.8 GHz, 0.0407〖 λ〗_0×0.0552〖 λ〗_0 at 7.2 GHz and 0.0543〖 λ〗_0×0.0736〖 λ〗_0 at 9.6 GHz.
Compared with current designs, the above circuits are smaller in size. The effectiveness of dual-band bridged T-coil on the design of miniaturized on-chip passive microwave circuit is also validated through proposed design examples, and in a single circuit to achieve dual-frequency characteristics.

關鍵字(中)

★ 橋式T線圈
★ 直交分合波器
★ 功率分配器
★ 吸收式帶止濾波器
★ 雙頻

關鍵字(英)

★ bridged-T coil
★ branch-line coupler
★ power divider
★ ABSF
★ dual-band

論文目次

論文摘要 I
ABSTRACT II
致謝 IV
目錄 V
圖形列表 VII
表格列表 XX
第一章緒論 1
1.1 研究動機 1
1.2 文獻回顧 3
1.3 章節介紹 5
第二章雙頻橋式T線圈等效傳輸線原理與設計 6
2.1傳統橋式T線圈 6
2.2雙頻橋式T線圈 11
2.2.1 電路架構與原理 11
2.2.2 積體被動元件製程 20
2.2.3 實作與量測驗證 22
2.3 小結 32
第三章微小化雙頻直交分合波器 33
3.1 電路架構與原理 33
3.2 實作與量測驗證 35
3.3 小結 47
第四章微小化雙頻威爾京生功率分配器 49
4.1 電路架構與原理 49
4.2 實作與量測驗證 51
4.3 小結 64
第五章微小化三頻帶吸收式帶止濾波器 66
5.1吸收式帶止濾波器 66
5.1.1 設計原理 66
5.1.2 參數選擇 69
5.1.3 電阻阻值的選擇 71
5.2微小化三頻帶吸收式帶止濾波器 75
5.2.1理想微小化三頻帶吸收式帶止濾波器設計原理 75
5.2.2實作與量測驗證---薄膜積體被動元件製程 81
5.2.3實作與量測驗證---氮化鎵積體電路製程 103
5.2.4實作與量測驗證---砷化鎵積體電路製程 112
5.3小結 133
第六章結論 140
參考文獻 143

參考文獻

[1] I.-H. Lin, M. DeVincentis, C Caloz, and T. Itoh, “Arbitrarily dual-band
components using composite right/left-handed transmission lines,” IEEE Trans.
Microw. Theory Techn., vol. 52, no. 4, pp. 1142–1149, Apr. 2004.
[2] K.-K. M. Cheng and S. Yeung, “A novel dual-band 3-dB branch-line coupler
design with controllable bandwidths,” IEEE Trans. Microw. Theory Techn., vol.
60, no. 10, pp. 3055–3061, Oct. 2012.
[3] P.-L. Chi and K.-L. Ho, “Design of dual-band coupler with arbitrary power
division ratios and phase differences,” IEEE Trans. Microw. Theory Techn., vol.
62, no. 12, pp. 2965–2974, Dec. 2014.
[4] K.-S. Chin, K.-M. Lin, Y.-H. Wei, T.-H. Tseng, and Y.-J. Yang, “Compact dual-
band branch-line and rat-race couplers with stepped-impedance-stub lines,” IEEE
Trans. Microw. Theory Techn., vol. 58, no. 5, pp. 1213–1221, May 2010.
[5] H. Kim, B. Lee and M. J. Park, "Dual-band branch-line coupler with port
extensions," IEEE Trans. Microw. Theory Techn., vol. 58, no. 3, pp. 651-655,
March 2010.
[6] L. K. Yeung, “A compact dual-band 90o coupler with coupled-line sections,” IEEE
Trans. Microw. Theory Techn., vol. 59, no. 9, pp. 2227–2232, Sept. 2011.
[7] C.-H. Yu and Y.-H. Pang, “Dual-band unequal-power quadrature branch-line
coupler with coupled lines,” IEEE Microw. Wireless Compon. Lett., vol. 23, no. 1,
pp. 10–12, Jan. 2013.
[8] S.-Y. Zheng, Y. Wu, Y. Li, Y. Liu, and Y. Long, “Dual-band hybrid coupler with
arbitrary power division ratios over the two bands,” IEEE Trans. Compon.
Packag., Manuf. Technol., vol. 4, no. 8, pp. 1347–1358, Aug. 2014.
[9] H.-C. Lu, Y.-L. Kuo, P.-S. Huang, and Y.-L. Chang, “Dual-band CRLH branch-
line coupler in LTCC by lumped elements with parasitic control,” in IEEE MTT-
S Int. Microw. Symp. Dig., pp. 393-396, May 2010.
[10] C. Gai, Y.-C. Jiao, and Y.-L. Zhao, “Compact dual-band branch-line coupler with
dual transmission lines,” IEEE Microw. Wireless Compon. Lett., vol. 26, no. 5, pp.
325-327, May 2016.
[11] C.-F. Chen, S.-F. Chang, and B.-H. Tseng, “Compact microstrip dual-band
quadrature coupler based on coupled-resonator technique,” IEEE Microw.
Wireless Compon. Lett., vol. 26, no. 7, pp. 487-489, Jul. 2016.
[12] M. Pozar, Microwave Engineering, 3rded., Jhon Wiley & Sons, Inc., 2005.
[13] S. Srisathit, M. Chongcheawchamnan, and A.Worapishet, “Design and
realization of dual-band 3 dB power divider based on two-section transmission-
line topology,” Electron. Lett., vol. 39, no. 9, pp. 723–724, May, 2003.
[14] C. Monzon, “A small dual-frequency transformer in two sections,” IEEE Trans.
Microw. Theory Techn., vol. 51, no. 4, pp. 1157–1161, Apr. 2003.
[15] L. Wu, Z. Sun, H. Yilmaz, and M. Berroth, “A dual-frequency Wilkinson power
divider,” IEEE Trans. Microw. Theory Techn., vol. 54, no. 1, pp. 278–284, Jan.
2006.
[16] K. K. M. Cheng and F. L. Wong, “A new Wilkinson power divider design for dual
band application,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 9, pp. 664-
666, Sept. 2007.
[17] K.-K. M. Cheng and C. Law, “A novel approach to the design and implementation
of dual-band power divider,” IEEE Trans. Microw. Theory Techn., vol. 56, no. 2,
pp. 487-492, Feb. 2008.
[18] Y. Shin, B. Lee, and M.-J. Park, “Dual-band Wilkinson power divider with shifted
output ports,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 7, pp. 443-445,
Jul. 2008.
[19] A. Genc and R. Baktur, “Dual- and triple-band Wilkinson power dividers based
on composite right- and left-handed transmission lines,” IEEE Trans. Compon.
Packag., Manuf. Technol., vol. 1, no. 3, pp. 327–334, Mar. 2011.
[20] X. Wang, I. Sakagami, K. Takahashi, and S. Okamura, “A generalized dual-band
Wilkinson power divider with parallel L, C, and R components,” IEEE Trans.
Microw. Theory Techn., vol. 60, no. 4, pp. 952–964, Apr. 2012.
[21] J.-Q. Gong, K. Gao, and C.-H. Liang, “Synthesis of a miniaturised wireless local
area network dual-band microstrip Wilkinson power divider through a general
three-step optimisation process,” IET Microw. Antennas Propag., vol. 9, no. 12,
pp. 1274-1278, 2015.
[22] M.-J. Park and B. Lee, “Wilkinson power divider with extended ports for dual-
band operation,” Electron. Lett., vol. 44, no. 15, pp. 916-917, Jul. 2008.
[23] M.-J. Park, “Dual-band Wilkinson divider with coupled output port
extensions,” IEEE Trans. Microw. Theory Techn., vol. 57, no. 9, pp. 2232-2237,
Sept. 2009.
[24] Y. Wu, Y. Liu, and Q. Xue, “An analytical approach for a novel coupled-line dual-
band Wilkinson power divider,” IEEE Trans. Microw. Theory Techn., vol. 59, no.
2, pp. 286-294, Feb. 2011.
[25] N. Gao, G. Wu, and Q. Tang, “Design of a novel compact dual-band Wilkinson
power divider with wide frequency ratio,” IEEE Microw. Wireless Compon. Lett.,
vol. 24, no. 2, pp. 81-83, Feb. 2014.
[26] X. Ren, K. Song, M. Fan, Y. Zhu, and B. Hu, “Compact dual-band Gysel power
divider based on composite right- and left-handed transmission lines,” IEEE
Microw. Wireless Compon. Lett., vol. 25, no. 2, pp. 82-84, Feb. 2015.
[27] C.-W. Tang and Z.-Q. Hsieh, “Design of a planar dual-band power divider with
arbitrary power division and a wide isolated frequency band,” IEEE Trans.
Microw. Theory Techn., vol. 64, no. 2, pp. 486–492, Feb. 2016.
[28] N. Inoue, T. Kawakami, Y. Horri, and T. Kitamura, “A super-compact dual-band
Wilkinson power divider composed of multi-layered CRLH transmission lines,”
in Proc. 40th Eur. Microw. Conf., pp. 433-436, Sept. 2010.
[29] T. Oshima, M. Ohtsuka, H. Miyashita, and Y. Konishi, “Construction and Design
Equations of a Lumped Element Dual-Band Wilkinson Divider,” IEICE Trans.
Electron., vol. E92-C, no. 10, pp. 1322-1324, Oct. 2009.
[30] T. Kawai, I. Ohta, and A. Enokihara, “Design method of lumped-element dual-
band Wilkinson power dividers based on frequency transformation,” in Proc.
Asia-Pacific Microw. Conf., pp. 710–713, Dec. 2010.
[31] R. Quaglia, V. Camarchia, and M. Pirola, “Dual-band GaN MMIC power
amplifier for microwave backhaul applications,” IEEE Microw. Wireless Compon.
Lett., vol. 24, no. 6, pp. 409-411, June 2014.
[32] J.-S. Hong, and M. J. Lancaster, Microstrip Filters for RF/Micro-wave
Applications. New York: Wiley, 2001.
[33] D. R. Jachowski, “Passive enhancement of resonator Q in microwave notch filters,”
in IEEE MTT-S Int. Microw. Symp. Dig., 2004, pp. 1315-1318.
[34] A. C. Guyette, I. C. Hunter, R. D. Pollard, and D. R. Jachowski, “Perfectly-
matched bandstop filters using lossy resonators,” in IEEE MTT-S Int. Microw.
Symp. Dig., Jun. 2005, pp. 517–520.
[35] M. A. Morgan and T. A. Boyd, “Theoretical and experimental study of a new class
of reﬂectionless ﬁlter,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 5, pp.
1214–1221, May 2011.
[36] M. A. Morgan and T. A. Boyd, “Reﬂectionless ﬁlter structures,” IEEE Trans.
Microw. Theory Techn., vol. 63, no. 4, pp. 1263–1271, April 2015.
[37] J. Lee, T. C. Lee, and W. J. Chappell, “Lumped-element realization of absorptive
bandstop filter with anomalously high spectral isolation,” IEEE Trans. Microw.
Theory Tech., vol. 60, no. 8, pp. 2424–2430, Aug. 2012.
[38] J.-Y. Shao and Y.-S. Lin, “Millimeter-wave bandstop filter with absorptive
stopband,” in IEEE MTT-S Int. Microw. Symp. Dig., June 2014.
[39] J.-Y. Shao and Y.-S. Lin, “Narrowband coupled-line bandstop filter with
absorptive stopband,” IEEE Trans. Microw. Theory Techn., vol. 63, no.10, pp.
3469–3478, Oct. 2015.
[40] B. Kim, J. Lee, J. Lee, B. Jung, and W. J. Chappell, “RF CMOS integrated on-
chip tunable absorptive bandstop filter using Q-tunable resonators,” IEEE Trans.
Electron Device., vol. 60, no. 5, pp. 1730-1737, May 2013.
[41] T.-H. Lee, B. Kim, K. Lee, W. J. Chappell, and J. Lee, “Frequency-Tunable Low-
Q Lumped-Element Resonator Bandstop Filter With High Attenuation,” IEEE
Microw. Mag., vol. 64, no. 11, pp. 3549-3556, Nov. 2016.
[42] D. Psychogiou, R. Mao, and D. Perlious, “Series-cascaded absorptive notch-filters
for 4G-LTE radios,” in IEEE Radio Wireless Symp. Dig., pp. 177-179, Jan. 2015.
[43] Y. Morimoto, T. Yuasa, T. Owada, Y. Tahara, H. Miyashita, M. Memarian,
T. Itoh, and M. Miyazaki, “A Multiharmonic Absorption Circuit Using Quasi-
Multilayered Striplines for RF Power Amplifiers,” IEEE Trans. Microw. Theory
Techn., vol. 65, no. 1, pp. 109-118, Jan. 2017.
[44] 李駿華, "無頻寬減損之微小化功率分配器與巴特勒矩陣," 碩士論文國立
中央大學,2011.
[45] 曾子豪, "無頻寬減損之微小化集總元件被動電路," 碩士論文國立中央大
學, 2012.
[46] E. M. Chase and W. Kennan, “A power distributed amplifier using constant-R
networks,” in IEEE MTT-S Int. Microw. Symp. Dig., pp. 811–815, Jun. 1986.
[47] 簡世桓, "具有良好選擇度的寬頻吸收式帶止濾波器," 碩士論文國立中央大
學, 2017.
[48] 方偉廷, "基於橋式T線圈之微型化切換式波束成型模組," 博士論文國立中
央大學, 2017.
[49] B. Rong, J. Burghartz, L. Nanver, B. Rejaei and M. van der Zwan, "Surface-
passivated high-resistivity silicon substrates for RFICs", IEEE Electron Device
Lett., vol. 25, no. 4, pp. 176-178, Apr. 2004.

指導教授

林祐生(Yo-Shen Lin)

審核日期

2017-11-13

推文