營建工程於設計階段實施施工安全風險評估現況與推動誘因之研析

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：65

、訪客IP：18.117.8.62

姓名

郭建亨(Chien-Heng Kuo) 查詢紙本館藏

畢業系所

營建管理研究所

論文名稱

營建工程於設計階段實施施工安全風險評估現況與推動誘因之研析
(Studying the Current Status and Incentives of Implementing Construction Safety Risk Assessment in The Design Stage)

相關論文

★ 我國營造業承攬管理安全衛生法規之研析

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

營建工程之設計工作一般僅以工程實體之完成內容作考量；施工階段之施工風險評估、施工安全管理皆多由施工承攬廠商自行辦理，依據相關災害統計分析可得知職業災害發生之原因有相當比例與工程設計有關，然而現行我國職業安全衛生相關法規多著重於施工階段應由施工承攬廠商辦理之事項，並未對工程設計者應辦事項有所規範。為強化工程設計者之安全衛生責任，推動工程於設計階段實施施工安全之風險評估，依源頭管理概念可知工程於全生命週期前端完成風險評估、進行施工安全風險管理等工作，盡可能降低施工階段之職災發生率，進而提高施工人員之安全績效以及管理者之管理水平，本研究主要在於調查營建工程於設計階段實施施工安全風險評估之現況問題、推動誘因，俾推動在設計階段即辨識施工階段之潛在危害、評估並管控施工風險，以防止工程於施工階段發生職業災害。本研究主要以問卷調查、專家訪談與研析國內外法規等方式，瞭解台灣推動設計考量施工安全的障礙、誘因及改善方式，並提出適合我國業界於工程設計階段實施施工安全風險評估之建議作法。

摘要(英)

Generally, the design work of construction engineering only considers the physical entity to be completed. The construction risk assessment and safety management in the construction stage are mainly performed by contractors. According to the statistical analysis of occupational hazards, the causes of the occupational hazards are significantly related to engineering design. However, the existing health and safety (H&S)-related regulations in Taiwan mostly focus on the affairs handled by construction contractors during the construction stage and fail to set the norms for the affairs which should be performed by designers. In order to enhance H&S responsibility of designers and promote the implementation of construction safety risk assessment during the design stage, the construction safety risk assessment and risk management should be performed in the earlier stage of the life cycle of a construction project, according to the concept of source management, so as to reduce the occurrence rate of occupational hazards as much as possible in the construction stage and to further increase the safety performance of construction personnel and manager’s management level. This research aims at investigating the current status and incentives of construction engineering implementing construction safety risk assessment in the design stage to promote the identification of potential hazards and evaluation and control of construction risks in the design stages and thus, prevent the occupational hazards in the construction stage. This research adopts questionnaire survey, expert interviewing and study and analysis of domestic and foreign laws and regulations to understand the obstacles, incentives and improvement means of promoting design for construction safety. Additionally, this research puts forward the practical suggestions and means for implementing consturciton safety risk assessment in the design stage for the construction and architecture industries in Taiwan.

關鍵字(中)

★ 工程設計
★ 營造工程安全
★ 風險評估
★ 現況調查

關鍵字(英)

★ Engineering Design
★ Construction Engineering Safety
★ Risk Assessment
★ Inventory Survey

論文目次

摘要 i
Abstract ii
致謝 iii
目錄 iv
圖目錄 vi
表目錄 vii
第一章、緒論 1
1.1 研究背景與動機 1
1.2 研究目的 2
1.3 研究範疇 3
1.4 研究流程 3
第二章、文獻回顧 6
2.1 國外工程設計實施風險評估之制度探討 6
2.1.1 澳洲 6
2.1.2 英國 12
2.1.3 相關設計案例之探討 16
2.2 國外工程設計實施風險評估之相關文獻回顧 24
2.3 我國工程設計實施風險評估之制度探討 26
2.4 我國工程設計實施風險評估之相關文獻回顧 30
2.5 小結 32
第三章、研究方法 33
3.1 現況問題調查與彙整 (第一次專家訪談) 33
3.2 現況問題原因之剖析 36
3.3 現有制度改善 (第二次專家訪談) 41
第四章、問卷調查與可行性評估 43
4.1 問卷設計與調查方式 43
4.2 問卷調查 44
4.2.1 「業主」調查 44
4.2.2 「設計單位」調查 46
4.2.3 「施工廠商」調查 48
4.3 調查成果分析 50
4.4 現況評估、推動誘因分析 (第三次專家訪談) 54
4.5我國工程設計實施風險評估之全面落實誘因及建議作法 56
第五章、結論與建議 65
5.1 研究結論 65
5.2 研究建議 66
附錄、「工程設計實施風險評估之現況分析研究」問卷 73

參考文獻

參考文獻
(一) 國外重要文獻
1.Abdelhamid, T. S., and Everett, J. G. (2000). “Identifying Root Causes of Construction Accidents.” Journal of Construction Engineering and Management, 126(1), 52-60.
2.AS&CC (2006), Australian Safety and Compensation Council Guidance of the principles of safe design for work, 2006.
3.Atkinson, A. R. & Westall, R., (2010), The relationship between integrated design and construction and safety on construction projects. Construction Management and Economics, 28(9), 1007-1017.
4.Baiden, B., K. & Price, A. D. F., (2011), The effect of integration on project delivery team effectiveness. International Journal of Project Management, 29(2), 129-136.
5.Barker, M and Casey, S. (2012) “Safety in Design”.
6.Behm, M., (2005), Linking construction fatalities to the design for construction safety concept, Safety Science, 43(8), 589-611.
7.Centre for Construction Work Health and Safety Research (2014) “Safety in Design,” RMIT University.
8.Cooke, T. & Lingard, H., (2011), A retrospective analysis of work-related deaths in the Australian construction industry. In C. Egbu and E. ChoenWeng Lou (Eds.), Proceedings of the ARCOM Twenty-seventh Annual Conference, Association of Researchers in Construction Management (ARCOM), University of Reading, Reading, UK, 279-288 (ARCOM Twenty-seventh Annual Conference).
9.Driscoll, T. R., Harrison, J. E., Bradley, C. & Newson, R. S., (2008), The Role of Design Issues in Work-Related Fatal Injury in Australia, Journal of Safety Research 39(2), 209-214.
10.Franz, B. W., Leicht, R. M. & Riley, D. R., (2013), Project Impacts of Specialty Mechanical Contractor Design Involvement in the Health Care Industry: Comparative Case Study. Journal of Construction Engineering and Management, 139(9), 1091-1097.
11.Gambatese, J. A., Behm, M. & Hinze, J. W., (2005a), Viability of Designing for Construction Worker Safety. Journal of Construction Engineering and Management, 131(9), 1029-1036.
12.Gambatese, J. A., Hinze, J. W. & Behm, M., (2005b), Investigation of the Viability of Designing for Safety. The Center to Protect Workers′ Rights, Silver Spring, MD, USA.
13.GHD (2009) Health and Safety Procedure, Safety in Design, Rev 1, January 2009.
14.Gibb, A., Haslam, R., Hide, S. & Gyi, D., (2004), The role of design in accident causality. In: S. Hecker, J. Gambatese & M. Weinstein (Eds.), Designing for Safety and Health in Construction. University of Oregon Press, Eugene, Oregon, 11-21.
15.Haslam, R., Hide, S., Gibb, A., Gyi, D., Atkinson, S., Pavitt, T., Duff, R. & Suraji, A., (2003), Causal factors in construction accidents. (RR 156): Health and Safety Executive, HMSO, Norwich.
16.Health and Safety Executive (HSE), (2002), Revitalising Health and Safety in Construction. Retrieved from http://www.hse.gov.uk/consult/disdocs/dde20.pdf.
17.Health and Safety Executive (HSE), (2015), Construction (Design and Management) Regulations 2015. Health and Safety Executive, HMSO, Norwich.
18.Kaminetzky, Dov (1991) Design And Construction Failures: Lessons from Forensic Investigations. McGraw-Hill Inc., New York, NY.
19.Love, P., Gunasekaran, A. & Li, H. (1998), Concurrent engineering: a strategy for procuring construction projects. International Journal of Project Management, 16(6), 375-383.
20.National Occupational Health and Safety Commission (NOHSC), (2002), National OHS Strategy 2002-2012. ISBN 0 642 325685, Commonwealth of Australia, Canberra.
21.National Occupational Health and Safety Commission (NOHSC), (2005), National Standard for Construction Work. ISBN 1920763678, Commonwealth of Australia, Canberra.
22.OSHA (2015) “Design for Construction Safety” Lecture Material, Occupational Safety and Health Administration, Department of Labor, United States.
23.Safe Work Australia (2012a), Australian Work Health and Safety Strategy 2012-2022. Commonwealth Government of Australia, Canberra.
24.Safe Work Australia (2016), Model Work Health and Safety (WHS) Act 2010. Commonwealth Government of Australia, Canberra.
25.Safe Work Australia (2017), Jurisdictional progress on the model work health and safety laws. Retrieved from http://www.safeworkaustralia.gov.au/sites/swa/model-whs-laws/pages/jurisdictional-progress-whs-laws .
26.Safe Work Australia, (2006), Guidance on the principles of safe design for work. Commonwealth Government of Australia, Canberra.
27.Safe Work Australia, (2012b), Safe Design of Structures Code of Practice. ISBN 978-0-642-78546-6, Commonwealth Government of Australia, Canberra.
28.Smallwood, J., (1996), The influence of designers on occupational safety and health. In L. M. Alves Dias & R. J. Coble, (Eds.), First International Conference of CIB Working Commission W99, Implementation of Safety and Health on Construction Sites, September 4-7. Balkema, Rotterdam, 203-213.
29.Swuste, P., Frijters, A. & Guldenmund, F., (2012), Is it possible to influence safety in the building sector? A literature review extending from 1980 until the present. Safety Science, 50(5), 1333-1343.
30.Szymberski, R., (1997), Construction Project Safety Planning. TAPPI Journal, 80(11), 69-74.
31.Toole, T.M., (2007), Design engineers’ responses to safety situations. ASCE Journal of Professional Issues in Engineering Education and Practice, 133(2), 126-131.
32.U.S. Bureau of Labor Statistics, 2012 Census of Fatal Occupational Injuries (preliminary data), Washington, D.C., 2013.

(二) 國內重要文獻
1.行政院勞動部職業安全衛生署(2017)，「105年勞動檢查年報」< https://www.osha.gov.tw/1106/1164/1165/1168/18292/ >(最後瀏覽日期：2017年9月29日)
2.劉福勳、葉怡成、林政達(1998)，「施工安全考量併入營建規劃及設計之可行項目—建築工程」，行政院勞工委員會勞工安全衛生研究所委託研究案，中華大學。
3.林耀煌、蔡茂生、傅還然、林國濬(1999)，「施工安全併入土木工程規劃及設計之可行性研究—橋梁工程」行政院勞工委員會勞工安全衛生研究所委託研究案，國立臺灣科技大學。
4.廖洪鈞、蔡茂生、石正義、林國濬(2000)，「編製建築設計納入施工安全實務手冊」，行政院勞工委員會勞工安全衛生研究所委託研究案，國立臺灣科技大學。
5.張大鵬(2007)，「工程規劃設計階段實施施工安全風險管理技術手冊計畫」，財團法人台灣工業技術研究發展基金會委託研究案，國立臺灣科技大學。
6.鄒子廉(2006)，「英國工程規劃設計階段納入安全考量機制考察報告」，行政院勞工委員會。
7.行政院勞動部(2013)，職業安全衛生法。
8.行政院公共工程委員會(2017)，政府公共工程計畫與經費審議作業要點基本設計階段之必要圖說。
9.行政院公共工程委員會(2005)，公共建設工程經費估算編列手冊。
10.行政院公共工程委員會(2017)，機關委託技術服務廠商評選及計費辦法。
11.行政院公共工程委員會(2017)，公共工程技術服務契約範本。
12.行政院內政部(2011)，建築法。
13.新北市政府(2011)，新北市建築管理規則。
14.行政院勞動部(2016)，危險性工作場所審查及檢查辦法。
15.行政院勞動部職業安全衛生署(2014)，勞動檢查機構辦理丁類危險性工作場所審查注意事項。
16.行政院公共工程委員會(2017)，政府採購法。

指導教授

王翰翔陳介豪(Han-Hsiang Wang Jieh-Haur Chen)

審核日期

2018-1-26

推文