窄加勁擋土牆的破壞機制與基於變形之設計方法

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：136

、訪客IP：18.118.10.141

姓名

Pham Truong Nhat Phuong(Truong-Nhat-Phuong Pham) 查詢紙本館藏

畢業系所

土木工程學系

論文名稱

窄加勁擋土牆的破壞機制與基於變形之設計方法
(Failure mechanism and deformation - based - design of narrow geosynthetic reinforced earth walls)

相關論文

★ 以離心振動臺試驗模擬緩衝材料中廢棄物罐之振動反應	★ 緩衝材料在不同圍壓下之工程性質
★ 具裂縫的緩衝材料自癒行為模擬	★ 具不同上部結構之樁基礎受振行為
★ 基盤土壤液化對上方土堤位移的影響	★ 回填與緩衝材料之動態強度
★ 砂質土壤中柔性擋土牆在動態載重下的行為	★ Effect of Vertical Drain Methods on The Soil Liquefaction
★ Centrifuge Modelling on Failure Behaviours of Sandy Slope Caused by Gravity, Rainfall and Earthquake	★ 微生物膠結作用對砂質土壤性質的影響
★ 基盤土壤液化引致的側潰對上方土堤之影響及其改善對策	★ 土壤液化引致側向滑移對樁基礎之影響及其對策
★ 挖掘機鏟斗上土壤黏附問題的基礎研究	★ 低放射性廢棄物最終處置回填材料於不同配比下之工程力學特性
★ 以離心振動台試驗探討基盤振動方向與坡向夾角對側向滑移之反應	★ 應用時域反射法於地層下陷監測之改善研發

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

近年來，對加勁擋土牆的行為及破壞機制之相關研究豐碩。加勁擋土牆具有良好的穩定性，亦可容許較大變形。在空間有限的情況下，例如在山區或沿海地區需拓寬道路面積時，可以通過調整加勁材的長度建造合適的加勁擋土牆取得額外用地。
調整加勁材的強度、間距、長寬比以及配置會影響加勁擋土牆的行為，亦會改變牆背的側向土壓力分佈。本研究中，透過一系列之地工離心模型試驗，探討窄加勁擋土牆（GRE）的破壞行為、牆背側向土壓力分佈以及變形機制。試驗結果中得到之側向土壓力、零土壓力區（zero-earth-pressure zone）與水平位移之間的關係，可應用於預測窄加勁擋土牆的變形。
本研究建立一套以變形量設計窄加勁擋土牆之方法 (deformation – based -design)，且根據試驗結果簡化設計窄加勁擋土牆時所需之計算過程，於實務上應用時，可預測加勁材的行為 (progressive behavior)，並提供大地工程師一套好用且精準之設計方法。

摘要(英)

In recent years, the working performance of mechanically stabilized earth (MSE) walls has shown their outstanding stability and capacity to accommodate large deformation. The behaviors and failure mechanisms of conventional MSE walls have been carefully examined. In case where space is limited, such as mountainous regions, for coastline protection, or road expansion, the conventionally stabilized earth wall can be modified by adjusting the length of reinforcement to conform to the characteristics of the different construction areas. The modification and arrangement of reinforcement components including their tensile strength, vertical spacing, aspect ratio, as well as configuration play key roles in the behavior of reinforced earth walls and can also lead to differences in the distribution of lateral earth pressure as compared with conventional MSE walls. In this study, a series of geotechnical centrifuge tests were conducted to clarify the failure behaviors, distribution of lateral earth pressure, and deformation progresses of narrow geosynthetic reinforced earth (GRE) walls, including single-facing and double-facing narrow GRE wall. The mutual relationship among lateral earth pressure, zero-earth-pressure zone, and horizontal displacement can be applied to predict the deformation of a narrow GRE wall. The deformation - based - design is established in order to predict the progressive behavior of reinforcement component in reality. A design process for narrow GRE wall structure is proposed to simplify the calculation based on thorough understanding from experimental results. This study facilitates geotechnical engineers to calculate conveniently and accurately the narrow GRE wall in practice.

關鍵字(中)

★ 加勁擋土牆
★ 單邊回包式窄加勁擋土牆
★ 雙邊回包式窄加勁擋土牆
★ 破壞行為
★ 側向土壓力
★ 變形設計
★ 水平位移
★ 折減因子

關鍵字(英)

★ mechanically stabilized earth wall
★ geosynthetic reinforced earth wall
★ single-facing narrow GRE wall
★ double-facing narrow GRE wall
★ failure behavior
★ lateral earth pressure
★ deformation-based-design
★ horizontal displacement
★ reduction factor

論文目次

ABSTRACT vi
摘要 vii
LIST OF TABLES xvi
LIST OF FIGURES xvii
NOTATIONS xxiv
ABBREVIATIONS xxvi
CHAPTER 1: INTRODUCTION 1
1-1 Overview 1
1-2 Motivations 3
1-3 Purposes of this study and proposed methodology 4
1-4 Content of the dissertation 5
CHAPTER 2: BACKGROUND AND LITERATURE REVIEW 8
2-1 Introduction 8
2-2 Geosynthetic reinforced earth structure 8
2-2-1 Conventional mechanically stabilized earth wall 9
2-2-2 Narrow mechanically stabilized earth wall 9
2-3 Design procedure of conventional MSE wall 11
2-4 Overview of previous studies on narrow GRE wall 12
2-4-1 Overview of research on failure behaviors of narrow MSE wall 12
2-4-2 Overview of research on lateral earth pressure of narrow GRE wall 17
2-4-3 Overview of studies on the displacement of narrow MSE wall under different situations 21
2-5 Overview of limit equilibrium analysis on narrow GRE wall 22
2-5-1 Overview of internal stability calculations by Rankine’s active earth pressure theory 23
2-5-2 Overview of internal stability calculations by the Method of Slices 25
CHAPTER 3: TEST APPARATUS AND MATERIALS 44
3-1 Introduction 44
3-2 Principles of centrifuge modeling 44
3-2-1 Scaling law and scale effect 45
3-2-2 Principle of Modeling of Models 46
3-2-4 Uncertainties of geotechnical centrifuge tests 47
3-3 Experimental apparatus 49
3-3-1 NCU Geotechnical Centrifuge 49
3-3-2 Specimen containers 50
3-3-3 Traveling Pluviation Apparatus 51
3-3-4 Lateral confining system 53
3-3-5 Lateral earth pressure measurement instrument 54
3-3-6 Observation systems 56
3-4 Soil and reinforcement material 57
3-4-1 Properties of Sibelco quartz sand 57
3-4-2 Characteristics of reinforcement materials 57
CHAPTER 4: TEST PROGRAMS 78
4-1 Introduction 78
4-2 Configuration of centrifuge models of narrow GRE wall 78
4-2-1 Design parameters of narrow GRE wall models 78
4-2-2 Arguments for variables of narrow GRE wall model 78
4-2-3 Arguments for invariables of narrow GRE wall model 79
4-2-4 Test groups and purposes 80
4-3 Preparation of single-facing and double-facing narrow GRE wall model. 80
4-4 Procedures of testing and test repeatability 81
4-4-1 Procedures of geotechnical centrifuge tests 81
4-4-2 Test repeatability 82
CHAPTER 5: FAILURE BEHAVIORS AND DISCUSSIONS OF SINGLE-FACING NARROW GEOSYNTHETIC REINFORCED EARTH WALLS 88
5-1 Introductions 88
5-2 Failure behaviors of single-facing narrow GRE wall 89
5-3 Lateral earth pressure and zero-earth-pressure development of single-facing narrow GRE wall 91
5-4 Displacement analysis of single-facing narrow GRE wall 95
5-5 Discussions on improvement effect of the anchored layer at wall top 98
5-6 Discussions on the design of single-facing narrow GRE wall 99
5-6-1 Effect of reinforcement tensile strength 100
5-6-2 Effect of reinforcement spacing or the numbers of reinforcement layers 101
5-6-3 Effect of reinforcement length 102
5-6-4 Conclusions on the performance of single-facing narrow GRE wall 103
5-7 Suggestion of modified lateral earth pressure of narrow GRE wall 104
5-7-1 Distribution of lateral earth pressure proposed by FHWA guideline 104
5-7-2 Proposal of reduction factor for single-facing narrow GRE wall 106
CHAPTER 6: FAILURE BEHAVIORS AND DISCUSSIONS OF DOUBLE - FACING NARROW GEOSYNTHETIC REINFORCED EARTH WALLS 127
6-1 Introductions 127
6-2 Failure behaviors of double-facing narrow GRE wall 127
6-3 Lateral earth pressure of double-facing narrow GRE wall 128
6-4 Displacement analysis of double-facing narrow GRE wall 132
6-5 Discussions on the performance of double-facing narrow GRE wall 135
6-5-1 Effect of reinforcement tensile strength 136
6-5-2 Effect of vertical reinforcement spacing 137
6-5-3 Effect of aspect ratio 138
6-5-4 Conclusions on the performance of double-facing narrow GRE wall 139
CHAPTER 7: DISCUSSION AND EVALUATIONS ON STABILITY OF NARROW GEOSYNTHETIC REINFORCED EARTH WALLS 153
7-1 Introductions 153
7-2 Stability assessment of narrow GRE wall by force equilibrium method 154
7-3 Stability assessment of narrow GRE wall by limit equilibrium method (LEM) 160
7-3-1 Establishment for limit equilibrium models 160
7-3-2 Model establishment 161
7-3-3 Properties of reinforcement materials 162
7-4 Limit equilibrium method analysis of single-facing narrow GRE wall 164
7-4-1 Correlation between factor of safety and g-level 165
7-4-2 Correlation between factor of safety and maximum horizontal displacement 166
7-5 Limit equilibrium method analysis of double-facing narrow GRE wall 167
7-5-1 Correlation between factor of safety and g-level 167
7-5-2 Correlation between factor of safety and maximum horizontal displacement 168
7-6 Proposed evaluation procedure of single-facing narrow GRE wall 169
CHAPTER 8: DEFORMATION – BASED - DESIGN OF NARROW GEOSYNTHETIC REINFORCED EARTH WALLS 184
8-1 Introductions 184
8-2 Deformation–based–design of single-facing narrow GRE wall 184
8-2-1 Correlation between wall displacement and reinforcement strain 186
8-3 Deformation–based–design of double-facing narrow GRE wall 187
8-3-1 Correlation between wall displacement and reinforcement strain 187
CHAPTER 9: CONCLUSIONS AND FUTURE RESEARCHES 194
9-1 Conclusions 194
9-2 Limitation and suggestions 195
REFERENCES 197
APPENDIX I – FACTOR OF SAFETY OF NARROW GRE WALL 206
APPENDIX II – REINFORCEMENT STRAIN OF NARROW GRE WALL 239
APPENDIX III – BACK-CALCULATION OF NARROW GRE WALL 251

參考文獻

AASHTO, AASHTO LRFD Bridge Design Specifications, Sixth ed, American Association of State Highway and Transportation Officials., Washington, D.C, USA (2012).
Abramson, L.W., Lee, T.S., Sharma, S., and Boyce, G.M. Slope stability and stabilization methods. John Wiley & Sons (2001).
Aubertin, M., Li, L., Arnoldi, S., Belem, T., Bussière, B., Benzaazoua, M. and Simon, R., “Interaction between backfill and rock mass in narrow stopes,” Soil and rock America, Vol. 1, pp. 1157-1164 (2003).
ASTM D.4253-06, Standard test methods for maximum index density and unit weight of soils using a vibratory table, American Society for Testing and Materials, Philadelphia, PA, USA (2006).
ASTM D.4254-16, Standard test methods for minimum index density and unit weight of soils and calculation of relative density, American Society for Testing and Materials, Philadelphia, PA, USA (2006).
ASTM C.136-06, Standard test method for sieve analysis of fine and coarse aggregates, American Society for Testing and Materials, Philadelphia, PA, USA (2014).
ASTM D.3080, Standard test method for direct shear test of soils under consolidated drained conditions, American Society for Testing and Materials, Philadelphia, PA, USA, (2011).
ASTM D.4595-2005, Standard test method for tensile properties of geotextiles by the wide-width strip method, American Society for Testing and Materials, Philadelphia, PA, USA (2005).
Benmebarek, S., Attallaoui, S. and Benmebarek, N., “Interaction analysis of back-to-back mechanically stabilized earth walls,” Journal of Rock Mechanics and Geotechnical Engineering, Vol. 8, No. 5, pp. 697-702 (2016). http://dx.doi.org/10.1016/j.jrmge.2016.05.005
Berg, R.R., Christopher, B.R. and Samtani, N.C., Design of mechanically stabilized earth walls and reinforced soil slopes–Volume I. U.S., Department of Transportation Federal Highway Administration (FHWA), FHWA-NHI-10-024. (2009).
BSI-8006, Code of practice for strengthened/reinforced soils and other fills. London, British Standard Institution (2010).
Chen, C., Ge, L. and Zhang, J.S., “Finite element modeling of a field-scale shored mechanically stabilized earth wall,” In GeoShanghai 2010 International ConferenceShanghai Society of Civil Engineering Chinese Institute of Soil Mechanics and Geotechnical Engineering, American Society of Civil Engineers, Transportation Research Board, East China Architectural Design and Research Institute Company, Limited Deep Foundation Institute (2010). http://dx.doi.org/10.1061/41108(381)35
Chen, H.T., Lee, C.J. and Chen, H.W., “The traveling pluviation appartus for sand specimen preparation,” Proceedings of the International Conference Centrifuge, pp. 143-148 (1998).
Dobie, M., “Internal stability of reinforced soil structures using a two-part wedge method,” Indonesian Geotechnical Conference and Annual Scientific Meeting, Jakarta (2011).
Elias, V., Christopher, B.R. and Berg, R.R., Mechanically stabilized earth walls and reinforced soil slopes design and construction guidelines. U.S., Department of Transportation Federal Highway Administration (FHWA), FHWA-NHI-00-043 (2001).
Fretti, C., Presti, D.L. and Pedroni, S., “A pluvial deposition method to reconstitute well-graded sand specimens,” Geotechnical Testing Journal, Vol. 18, No. 2, pp.292-298 (1995).
Frydman, S. and Keissar, I., “Earth pressure on retaining walls near rock faces,” Journal of Geotechnical Engineering, Vol. 113, No. 6, pp. 586-599 (1987). http://dx.doi.org/10.1061/(ASCE)0733-9410(1987)113:6(586)
Greco, V., “Active thrust on retaining walls of narrow backfill width,” Computers and Geotechnics, Vol. 50, pp. 66-78 (2013). http://dx.doi.org/10.1016/j.compgeo.2012.12.007
Han, J. and Leshchinsky, D., “Analysis of back-to-back mechanically stabilized earth walls,” Geotextiles and Geomembranes, Vol. 28, No. 3, pp. 262-267 (2010). http://dx.doi.org/10.1016/j.geotexmem.2009.09.012
Hejazi, S.M., Sheikhzadeh, M., Abtahi, S.M. and Zadhoush, A., “A simple review of soil reinforcement by using natural and synthetic fibers,” Construction and building materials, Vol. 30, pp. 100-116 (2012). http://dx.doi.org/10.1016/j.conbuildmat.2011.11.045
Hung, W.Y., “Breaking failure behavior and internal stability analysis of geosynthetic reinforced earth walls,” Ph.D. Dissertation, National Central University, Jhongli, Taiwan (2008).
Hung, W.Y., Pham, T.N.P. and Weng, C.C., “Experimental study of the effect of different backfilled soils on the stability of mechanically stabilized earth walls,” Journal of the Chinese Institute of Engineers, (2019). https://doi.org/10.1080/02533839.2019.1694445
Janssen, H.A., “Versuche uber Getreidedruck in Silozellen,” Zeitschrift, Verein Deutscher Ingenieure, Vol. 39, pp. 1045-1049 (1895). Partial English Translation in Proceedings of Institute of Civil Engineers, London, England, pp. 553 (1896).
Jones, C.J.F.P., “Geoguide 6: Guide to Reinforced Fill Structures and Slope Design,” Geotechnical Engineering Office, Hong Kong, China (2017).
Kazimierowicz-Frankowska, K., “A case study of a geosynthetic reinforced wall with wrap-around facing,” Geotextiles and Geomembranes, Vol. 23, No. 1, pp. 107-115 (2005). https://doi.org/10.1016/j.geotexmem.2004.05.001
Kniss, K.T., Yang, K.H., Wright, S.G. and Zornberg, J.G., “Earth pressures and design considerations of narrow MSE walls,” Proc. Texas Section ASCE (2007).
Ko, H.Y., “Summary of the state-of-the-art in centrifuge model testing,” Centrifuges in soil mechanics, pp. 11-18 (1988).
Koerner, R.M. Designing with geosynthetics. Xlibris Corporation (2012).
Kuerbis, R. and Vaid, Y., “Sand sample preparation-the slurry deposition method,” Soils and Foundations, Vol. 28, No. 4, pp. 107-118 (1988). http://dx.doi.org/10.3208/sandf1972.28.4_107
Law, H., Ko, H.Y., Goddery, T. and Tohda, J., “Prediction of the performance of a geosynthetic-reinforced retaining wall by centrifuge experiments,” Proceedings of International Symposium on Geosynthetic-Reinforced Soil Retaining Walls, pp. 347-360 (1992).
Lawson, C. and Yee, T., “Reinforced soil retaining walls with constrained reinforced fill zones,” Geo-Frontier (2005). http://dx.doi.org/10.1061/40787(166)10
Lee, Y.B., Ko, H.Y. and McCartney, J.S., “Deformation response of shored MSE walls under surcharge loading in the centrifuge,” Geosynthetics International, Vol. 17, No. 6, pp. 389-402 (2010). http://dx.doi.org/10.1680/gein.2010.17.6.389
Leshchinsky, D., Leshchinsky, B. and Leshchinsky, O., “Limit state design framework for geosynthetic-reinforced soil structures,” Geotextiles and Geomembranes, Vol. 45, No. 6, pp. 642-652 (2017). http://dx.doi.org/10.1016/j.geotexmem.2017.08.005
Morrison, K.F., Harrison, F.E., Collin, J.G., Dodds, A.M. and Arndt, B., Shored mechanically stabilized earth (SMSE) wall systems design guidelines, U.S., Department of Transportation Federal Highway Administration (FHWA), FHWA-CFL/TD-06-001 (2006).
NCMA, Design manual for segmental retaining walls, National Concrete Masonry Association, Herndon, Virginia, USA (2010).
Porbaha, A. and Goodings, D.J., “Centrifuge modeling of geotextile-reinforced cohesive soil retaining walls,” Journal of Geotechnical Engineering, Vol. 122, No. 10, pp. 840-848 (1996). http://dx.doi.org/10.1061/(ASCE)0733-9410(1996)122:10(840)
Sawicki, A. and Kazimierowicz-Frankowska, K., “Creep behaviour of geosynthetics,” Geotextiles and Geomembranes, Vol. 16, No. 6, pp. 365-382 (1998). http://dx.doi.org/10.1016/S0266-1144(98)00020-X
Slide 6.0, 2D limit equilibrium slope stability for soil and rock slopes, Rocscience Inc (2018).
Springman, S., Bolton, M., Sharma, J. and Balachandran, S., “Modeling and instrumentation of a geotextile in the geotechnical centrifuge,” Proceedings of the International Symposium on Earth Reinforcement Practice (1992).
Take, W.A. and Valsangkar, A.J., “Earth pressures on unyielding retaining walls of narrow backfill width,” Canadian Geotechnical Journal, Vol. 38, No. 6, pp. 1220-1230 (2001). http://dx.doi.org/10.1139/t01-063
Taylor, R.N., Centrifuges in modelling: principles and scale effects, Geotechnical centrifuge technology, pp. 19-33 (1995).
Taylor, R.E. Geotechnical centrifuge technology. CRC Press (2014).
Viswanadham, B.V.S. and König, D., “Studies on scaling and instrumentation of a geogrid,” Geotextiles and Geomembranes, Vol. 22, No. 5, pp. 307-328 (2004). http://dx.doi.org/10.1016/S0266-1144(03)00045-1
Viswanadham, B.V.S. and König, D., “Centrifuge modeling of geotextile-reinforced slopes subjected to differential settlements,” Geotextiles and Geomembranes, Vol. 27, No. 2, pp. 77-88 (2009). http://dx.doi.org/10.1016/j.geotexmem.2008.09.008
Wilson-Fahmy, R.F., Koerner, R.M. and Fleck, J.A., “Unconfined and confined wide width tension testing of geosynthetics,” Geosynthetic Soil Reinforcement Testing Procedures, ASTM International (1993). http://dx.doi.org/10.1520/STP24312S
Woodruff, R., “Centrifuge modeling of MSE-shoring composite walls,” Master Thesis, Department of Civil Engineering, the University of Colorado (2003).
WSDOT M.46-03, Geotechnical Design Manual, Chapter 15 Abutments, retaining walls, and reinforced slopes, Washington State Department of Transportation, Olympia, Washington, USA (2005).
Xie, Y., Leshchinsky, B. and Yang, S., “Evaluating reinforcement loading within surcharged segmental block reinforced soil walls using a limit state framework,” Geotextiles and Geomembranes, Vol. 44, No. 6, pp. 832-844 (2016). http://dx.doi.org/10.1016/j.geotexmem.2016.06.010
Xu, C., Luo, Y.S., Chen, H.S. and Jia, B., “Effects of interface connections on narrowed mechanically stabilized earth walls,” Environmental Earth Sciences, Vol. 75, No. 21, pp. 1411 (2016). http://dx.doi.org/10.1007/s12665-016-6226-9
Yang, K.H. and Liu, C.N., “Finite element analysis of earth pressures for narrow retaining walls,” Journal of GeoEngineering, Vol. 2, No. 2, pp. 43-52 (2007). http://dx.doi.org/ 10.6310/jog.2007.2(2).1
Yang, K.H., Utomo, P. and Liu, T.L., “Evaluation of force-equilibrium and deformation-based design approaches for predicting reinforcement loads within geosynthetic-reinforced soil structures,” Journal of GeoEngineering, Vol. 8, No. 2, pp. 41-54 (2013). http://dx.doi.org/10.6310/jog.2013.8(2).2
Yang, K.H., Zornberg, J.G., Hung, W.Y. and Lawson, C.R., “Location of failure plane and design considerations for narrow geosynthetic reinforced soil wall systems,” Journal of GeoEngineering, Vol. 6, No. 1, pp. 27-40 (2011). http://dx.doi.org/10.6310/jog.2011.6(1).3
Yang, K.H., Zornberg, J.G. and Wright, S.G., “Numerical modeling of narrow MSE walls with extensible reinforcements,” Texas. Dept. of Transportation. Research and Technology Implementation Office, No. FHWA/TX-08/0-5506-2. (2008).
Yu, Y., Bathurst, R.J. and Allen, T.M., “Numerical modelling of two full-scale reinforced soil wrapped-face walls,” Geotextiles and Geomembranes, Vol. 45, No. 4, pp. 237-249 (2017). http://dx.doi.org/10.1016/j.geotexmem.2017.02.004
Zornberg, J.G., Mitchell, J.K. and Sitar, N., “Testing of reinforced slopes in a geotechnical centrifuge,” Geotechnical Testing Journal, Vol. 20, No. 4, pp. 470-480 (1997). https://doi.org/10.1520/GTJ10413J
Zornberg, J.G., Sitar, N. and Mitchell, J.K., “Limit equilibrium as basis for design of geosynthetic reinforced slopes,” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 124, No. 8, pp. 684-698 (1998). https://doi.org/10.1061/(ASCE)1090-0241(1998)124:8(684)

指導教授

洪汶宜(Wen-Yi Hung)

審核日期

2019-12-26

推文