參考文獻 |
[1] S.C. Singhal, K. Kendall, High-temperature Solid Oxide Fuel Cells: Fundamentals, Design, and Applicatons, Elsevier Advanced Technology, New York, 2003.
[2] Q.L. Ma, J.J. Ma, S. Zhou, R.Q. Yan, J.F. Gao, G.Y. Meng, A high-performance ammonia-fueled SOFC based on a YSZ thin-film electrolyte, J. Power Sources 164 (2007) 86-89.
[3] C.C. Liu, S.S. Shy, C.W. Chiu, M.W. Peng, H.J. Chung, Hydrogen/carbon monoxide syngas burning rates measurements in high-pressure quiescent and turbulent environment, Int. J. Hydrogen Energ. 36 (2011) 8595-8603.
[4] H. Miao, W.G. Wang, T.S. Li, T. Chen, S.S. Sun, C. Xu, Effects of coal syngas major compositions on Ni/YSZ anode-supported solid oxide fuel cells, J. Power Sources, 195 (2010) 2230-2235.
[5] V. Subotic, C. Schluckner, C. Hochenauer, An experimental and numerical study of performance of large planar ESC-SOFCs and experimental investigation of carbon depositions, J. Energy Inst. 89 (2016) 121-137.
[6] 張華屹,合成氣固態氧化物燃料電池性能與穩定性量測,國立中央大學碩士論文,2017。(http://ir.lib.ncu.edu.tw/handle/987654321/75994)
[7] W. Wang, R. Ran, C. Su, Y.M. Guo, D. Farrusseng, Z.P. Shao, Ammonia-mediated suppression of coke formation in direct-methane solid oxide fuel cells with nickel-based anodes, J. Power Sources 240 (2013) 232-240.
[8] G. Cinti, G. Discepoli, E. Sisani, U. Desideri, SOFC operating with ammonia: Stack test and system analysis, Int. J. Hydrogen Energ. 41 (2016) 13583-13590.
[9] K. Miyazaki, T. Okanishi, H. Muroyama, T. Matsui, K. Eguchi, Development of Ni-Ba(Zr,Y)O3 cermet anodes for direct ammonia-fueled solid oxide fuel cells, J. Power Sources 365 (2017) 148-154.
[10] J. Yang, T. Akagi, T. Okanishi, H. Muroyama, T. Matsui, K. Eguchi, Catalytic Influence of Oxide Component in Ni-Based Cermet Anodes for Ammonia-Fueled Solid Oxide Fuel Cells, Fuel Cells 15 (2015) 390-397.
[11] M. Henke, J. Kallo, K.A. Friedrich, W.G. Bessler, Influence of Pressurisation on SOFC Performance and Durability: A Theoretical Study, Fuel Cells 11 (2011) 581-591.
[12] M. Henke, C. Willich, C. Westner, F. Leucht, R. Leibinger, J. Kallo, K.A. Friedrich, Effect of pressure variation on power density and efficiency of solid oxide fuel cells, Electrochim. Acta 66 (2012) 158-163.
[13] P.C. Wu, S.S. Shy, Cell performance, impedance, and various resistances measurements of an anode-supported button cell using a new pressurized solid oxide fuel cell rig at 1-5 atm and 750-850oC, J. Power Sources, 362 (2017) 105-114.
[14] R.O. Hayre, Cha, S.W., Colella, W., PronzJohn, F.B., Fuel Cell Fundamentals, 2nd Ed. John Wiley & Sons Inc., New York, 2009.
[15] University of Cambridge, TLP Libriary, http://www.doitpoms.ac.uk/tlplib/fuel-cells/sofc_electrolyte.php.
[16] M. Mogensen, Jensen, K. V., Jorgensen, M. J., Primdahl, S., Progress in understanding SOFC electrodes, Solid State Ionics 150 (2003) 123-129.
[17] D.H. Jeon, J.H. Nam, C.J. Kim, Microstructural optimization of anode-supported solid oxide fuel cells by a comprehensive microscale model, J. Electrochem Soc. 153 (2006) A406-A417.
[18] E.P. Murray, T. Tsai, S.A. Barnett, A direct-methane fuel cell with a ceria-based anode, Nature 400 (1999) 649-651.
[19] W.L. Lundberg, S.E. Veyo, M. D. Moeckel, A high-efficiency solid oxide fuel cell hybrid power system using the Mercury 50 advanced turbines systems, J. Eng. Gas Turb. Power 125 (2002) 51-58.
[20] R.J. Kee, H.Y. Zhu, A.M. Sukeshini, G.S. Jackson, Solid oxide fuel cells: Operating principles, current challenges, and the role of syngas, Combust. Sci. Technol. 180 (2008) 1207-1244.
[21] Y. Patcharavorachot, A. Arpornwichanop, A. Chuachuensuk, Electrochemical study of a planar solid oxide fuel cell: Role of support structures, J. Power Sources 177 (2008) 254-261.
[22] M.M. Hussain, X. Li, I. Dincer, A general electrolyte-electrode-assembly model for the performance characteristics of planar anode-supported solid oxide fuel cells, J. Power Sources 189 (2009) 916-928.
[23] D. Sarantaridis, A. Atkinson, Redox cycling of Ni-based solid oxide fuel cell anodes: A review, Fuel Cells 7 (2007) 246-258.
[24] M. Stelter, A. Reinert, B.E. Mai, M. Kuznecov, Engineering aspects and hardware verification of a volume producable solid oxide fuel cell stack design for diesel auxiliary power units, J. Power Sources 154 (2006) 448-455.
[25] J. Hanna, W.Y. Lee, Y. Shi, A.F. Ghoniem, Fundamentals of electro- and thermochemistry in the anode of solid-oxide fuel cells with hydrocarbon and syngas fuels, Prog. Energ. Combust. 40 (2014) 74-111.
[26] 李信宏, 棋盤式雙極板尺寸流道效應對固態氧化物燃料電池性能之影響,國立中央大學碩士論文,2010。
(http://ir.lib.ncu.edu.tw/handle/987654321/43470)
[27] M. Ni, M.K.H. Leung, D.Y.C. Leung, Parametric study of solid oxide fuel cell performance, Energ. Convers. Manage. 48 (2007) 1525-1535.
[28] Q.A. Huang, R. Hui, B.W. Wang, H.J. Zhang, A review of AC impedance modeling and validation in SOFC diagnosis, Electrochim. Acta 52 (2007) 8144-8164.
[29] J.B. Jorcin, M.E. Orazem, N. Pebere, B. Tribollet, CPE analysis by local electrochemical impedance spectroscopy, Electrochim. Acta, 51 (2006) 1473-1479.
[30] P. Zoltowski, On the electrical capacitance of interfaces exhibiting constant phase element behaviour, J. Electroanal. Chem. 443 (1998) 149-154.
[31] L.Z. Bian, Z.Y. Chen, L.J. Wang, F.S. Li, K.C. Chou, Electrochemical performance and carbon deposition of anode-supported solid oxide fuel cell exposed to H2-CO fuels, Int. J. Hydrogen Energ. 42 (2017) 14246-14252.
[32] Z.R. Xu, X.Z. Fu, J.L. Luo, K.T. Chuang, Carbon Deposition on Vanadium-Based Anode Catalyst for SOFC Using Syngas as Fuel, J. Electrochem. Soc. 157 (2010) B1556-B1560.
[33] V. Alzate-Restrepo, J.M. Hill, Carbon deposition on Ni/YSZ anodes exposed to CO/H2 feeds, J. Power Sources 195 (2010) 1344-1351.
[34] R. Suwanwarangkul, E. Croiset, E. Entchev, S. Charojrochkul, M.D. Pritzker, M.W. Fowler, P.L. Douglas, S. Chewathanakup, H. Mahaudom, Experimental and modeling study of solid oxide fuel cell operating with syngas fuel, J. Power Sources 161 (2006) 308-322.
[35] J. Xiao, Y.M. Xie, J. Liu, M.L. Liu, Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels, J. Power Sources 268 (2014) 508-516.
[36] H. Miao, G.H. Liu, T. Chen, C.R. He, J. Peng, S. Ye, W.G. Wang, Behavior of anode-supported SOFCs under simulated syngases, J. Solid State Electr. 19 (2015) 639-646.
[37] J. Mermelstein, M. Millan, N. Brandon, The impact of steam and current density on carbon formation from biomass gasification tar on Ni/YSZ, and Ni/CGO solid oxide fuel cell anodes, J. Power Sources 195 (2010) 1657-1666.
[38] X.F. Ye, S.R. Wang, J. Zhou, F.R. Zeng, H.W. Nie, T.L. Wen, Assessment of the performance of Ni-yttria-stabilized zirconia anodes in anode-supported Solid Oxide Fuel Cells operating on H2-CO syngas fuels, J. Power Sources 195 (2010) 7264-7267.
[39] O. Costa-Nunes, R.J. Gorte, J.M. Vohs, Comparison of the performance of Cu-CeO2-YSZ and Ni-YSZ composite SOFC anodes with H2, CO, and syngas, J. Power Sources 141 (2005) 241-249.
[40] T. Horiuchi, K. Sakuma, T. Fukui, Y. Kubo, T. Osaki, T. Mori, Suppression of carbon deposition in the CO2-reforming of CH4 by adding basic metal oxides to a Ni/Al2O3 catalyst, Appl. Catal. A-Gen. 144 (1996) 111-120.
[41] L.L. Xu, H.L. Song, L.J. Chou, Carbon dioxide reforming of methane over ordered mesoporous NiO-Al2O3 composite oxides, Catal. Sci. Technol. 1 (2011) 1032-1042.
[42] J.J. Guo, H. Lou, L.Y. Mo, X.M. Zheng, The reactivity of surface active carbonaceous species with CO2 and its role on hydrocarbon conversion reactions, J. Mol. Catal. A-Chem. 316 (2010) 1-7.
[43] R. Baer, Y. Zeiri, R. Kosloff, Hydrogen transport in nickel (111), Phys. Rev. B 55 (1997) 10952-10974.
[44] S.S. Shy, S.C. Hsieh, H.Y. Chang, A pressurized ammonia-fueled anode-supported solid oxide fuel cell: Power performance and electrochemical impedance measurements, J. Power Sources 396 (2018) 80-87.
[45] G. Cinti, U. Desideri, D. Penchini, G. Discepoli, Experimental Analysis of SOFC Fuelled by Ammonia, Fuel Cells 14 (2014) 221-230.
[46] J. Yang, A.F.S. Molouk, T. Okanishi, H. Muroyama, T. Matsui, K. Eguchi, A Stability Study of Ni/Yttria-Stabilized Zirconia Anode for Direct Ammonia Solid Oxide Fuel Cells, Acs. Appl. Mater. Inter. 7 (2015) 28701-28707.
[47] 周政憲, 平板式加壓型合成氣固態氧化物燃料電池實驗研究,國立中央大學碩士論文,2018。(http://ir.lib.ncu.edu.tw/handle/987654321/79519)
[48] V.A.C. Haanappel, M.J. Smith, A review of standardising SOFC measurement and quality assurance at FZJ, J. Power Sources 171 (2007) 169-178.
[49] J. Nielsen, M. Mogensen, SOFC LSM:YSZ cathode degradation induced by moisture: An impedance spectroscopy study, Solid State Ionics 189 (2011) 74-81.
[50] R. Barfod, M. Mogensen, T. Klemenso, A. Hagen, Y.L. Liu, P.V. Hendriksen, Detailed characterization of anode-supported SOFCs by impedance spectroscopy, J. Electrochem. Soc. 154 (2007) B371-B378.
[51] B. Liu, H. Muroyama, T. Matsui, K. Tomida, T. Kabata, K. Eguchi, Analysis of Impedance Spectra for Segmented-in-Series Tubular Solid Oxide Fuel Cells, J. Electrochem. Soc. 157 (2010) B1858-B1864.
[52] B. Liu, H. Muroyama, T. Matsui, K. Tomida, T. Kabata, K. Eguchi, Gas Transport Impedance in Segmented-in-Series Tubular Solid Oxide Fuel Cell, J. Electrochem. Soc. 158 (2011) B215-B224.
[53] S. Ishida, S. Imamura, Y. Fujimura, Adsorption of Carbon-Monoxide on Lewis Acid Sites of Alumina, React. Kinet. Catal. L. 43 (1991) 447-452.
|