摘要(英) |
InGaAs based Single-photon Avalanche Diode (SPAD) instead of Si SPAD is studied for the detection of light with wavelength longer than 1μm. It has great potential in the applications of medical electronics, fiber-optic communication, self-driving control systems and etc. The application of Light Detection and Ranging (Lidar) receives especial attention. In such application, SPAD can acts as a ToF sensor to accurately calculate the safe range of the car from the car in proximity, pedestrians and obstacles. InGaAs/InP based SPAD had been studied for a long time and is currently still active. Along with the multiplication layer using InP, the multiplication using InAlAs recently receives much interest due to its higher avalanche triggering probability, so a higher photon detection efficiency (PDE) is anticipated. This work focuses on the study of InGaAs/InAlAs based SPAD which is composed with absorption, grading, charge and multiplication layer. We use Silvaco technology computer-aided design (TCAD) to simulate the electric field strength and distribution for the determination of breakdown voltage (49 V) as well as punch-through voltage (20 V). In a typical SPAD design, the multiplication layer should be thick enough for reducing the tunneling current and hence suppressing the dark count rate (DCR). However, as the thickness of multiplication layer increases, the afterpulsing effect and the timing jitter will also get worse. Therefore, a unique design in the multiplication layer is proposed to compromise DCR, afterpulsing and jitter. The multiplication layer is separated into two layers with different electric field strength by an additional charge layer, which makes the effective avalanche region narrower, and hence improving the afterpulsing effect and the timing jitter.
SPAD devices are processed into mesa-type to define the active detection region. The sidewall of mesa is first treated by the sulphidation and protected by the passivation for reducing the leakage current. The anode and cathode are plated with p/n metal respectively and then wired bond to a PCB for subsequent measurement, including current-voltage characteristics, capacitance-voltage characteristics, dark count rate analysis, afterpulsing probability, photon detection efficiency, and jitter.
For the sidewall passivation, we chose BCB and PI which can effectively reduce the leakage current according to the literature. The breakdown voltage and punch-through voltage of our SPAD device are 42.7 V and 25 V at room temperature respectively. The temperature coefficient is 49 mV / K. The subsequent measurements are carried out for the SPAD device passivated by BCB since it has better performance in the leakage current and dark count rate. Under the operation condition of gating pulse width of 20 ns, the temperature of 187.5 K and the excess bias of 3 %, the PDE reaches 39 % and the dark count rate is 19 %. Since the dark count rate is really high at such long pulse width for the reason of serious afterpulsing effect, we further reduce the gating pulse width to 5 ns. The afterpulsing is thus greatly reduced to below 1 % while operating at 500 kHz either for room temperature or for 187.5 K. We obtain the best DCR of 0.5 % per gate, the PDE of 26 % and timing jitter is 72 ps at 187.5 K for the excess bias of 7 %. It is worthy to emphasize that our SPAD device can perform well at room temperature, with the DCR of 13 % and PDE of 18 %, under the excess bias of 7 %.
|
參考文獻 |
[1] S. Kasap, J. A. Rowlands. ”Lucky drift impact ionization in amorphous semiconductors.” J. Appl. Phys. VOL. 96, 2004.
[2] Yoshikazu Takeda, Akio Sasaki, Yujiro Imamura, and Toshinori Takagi. ”Electron mobility and energy gap of In0.53Ga0.47As on InP substrate.” Journal of Applied Physics, VOL. 47, AUGUST 1976.
[3] L. Pavesi and F. Piazza. ”Temperature dependence of the InP band gap from a photolurninescence study.” Phys. Rev. B, VOL. 44, OCTOBER 1991.
[4] I. Vurgaftman, J. R. Meyer, L. R. Ram-Mohan. ”Band parameters for III–V compound semiconductors and their alloys.” Journal of Applied physics, VOL. 89, JUNE 2001.
[5] Y. S. Yong. ”A convenient band-gap interpolation technique and an improved band line-up model for InGaAlAs on InP.” Applied Physics B VOL. 99, MAY 2010.
[6] P. Kleinow, P.Kleinow, F.Rutz, R.Aidam, W.Bronner, H.Heussen, M.Walther. ”Experimental investigation of the charge-layer doping level in InGaAs/InAlAs avalanche photodiodes.” Infrared Physics & Technology, VOL. 71, 2015.
[7] W. Hallwachs. ”Ueber den Einfluss des Lichtes auf electrostatisch geladene Körper.” Annalen der Physik und Chemie, IEEE Photonics Journal VOL. 5, APRIL 2013
[8] 陳冠宇,「砷化銦鎵/磷化銦單光子雪崩型偵測器暗計數特性分析」,國立中央大學,碩士論文,民國106年
[9] K. Sugihara, E. Yagyu, and Y. Tokuda. ”Numerical analysis of single photon detection avalanche photodiodes operated in the Geiger mode.” Journal of Applied Physics, VOL. 99, 2006.
[10] 張世承,「砷化銦鎵/砷化鋁銦單光子崩潰二極體的設計與特性探討」,國立中央大學,碩士論文,民國107年
[11] Sifang You, James Cheng, and Yu-Hwa Lo. ”Physics of Single Photon Avalanche Detectors with Built-In Self-Quenching and Self-Recovering Capabilities.” IEEE Joural of Quantum Electronics, VOL. 48, JULY 2012
[12] Xiao Meng. ”InGaAs/InAlAs single photon avalanche diodes at 1550 nm and X-ray detectors using III-V semiconductor materials.” The University of Sheffield, PhD dissertation, AUGUST 2015.
[13] David A Humphreys. ”Measurement of Absorption Coefficients of Ga0.47In0.53As Over the Wavelength Range 1.0–1.7 μm.” Electronics Letters, VOL. 21, 1985.
[14] Fabio Acerbi, Michele Anti, Alberto Tosi, Franco Zappa. ”Design Criteria for InGaAs/InP Single-Photon Avalanche Diode.” Fabio Acerbi Michele Anti Alberto Tosi Franco Zappa, IEEE Photonics Journal, VOL. 5, APRIL 2013.
[15] H.S. Kim, J.H. Choi, H.M. Bang, Y. Jee, S.W. Yun, J. Burm, M.D. Kim and A.G. Choo. ”Dark current reduction in APD with BCB passivation” Electronics Letters 29th, VOL. 37, MARCH 2001.
[16] David M. Braun. ”Design of single layer antireflection coatings for lnP/ln0.53Ga0.47As/lnP photodetectors for the 1200-1600-nm wavelength range” Applied Optics, VOL. 27, MAY 1988.
[17] Lionel Juen Jin Tan. ”Temperature Dependence of Avalanche Breakdown in InP and InAlAs.” IEEE Journal of Quantum Electronics, VOL. 46, AUGUST 2010.
[18] G. Karve, S. Wang, F. Ma, X. Li, and J. C. Campbell. ”Origin of dark counts in In0.53Ga0.47As/In0.52Al0.48As avalanche photodiodes.” Applied Physics Letters, VOL. 86, 2005.
[19] Gauri Vibhakar Karve. ”Avalanche Photodiodes As Single Photon
Detectors.” The University of Texas at Austin, PhD Dissertation, MAY 2005.
[20] Yingjie Ma , Yonggang Zhang, Yi Gu, Xingyou Chen, Yanhui Shi, Wanyan Ji, Suping Xi, Ben Du, Xiaoliang Li, Hengjing Tang, Yongfu Li, and Jiaxiong Fang. ”Impact of etching on the surface leakage generation in mesa-type InGaAs/InAlAs avalanche photodetectors.” Optical Express, VOL. 24, 2016.
[21] Alberto Tosi, Fabio Acerbi, Michele Anti, and Franco Zappa. ”InGaAs/InP Single-Photon Avalanche Diode With Reduced Afterpulsing and Sharp Timing Response With 30 ps Tail” IEEE Journal of Quantum Electronics, VOL. 48, SEPTEMBER 2012.
[22] Jun Zhang, Mark A Itzler, Hugo Zbinden and Jian-Wei Pan. ”Advances in InGaAs/InP single-photon detector systems for quantum communication” Science & Applications, MARCH 2015.
[23] Hao-Yi Zhao, Naseem, Andrew H. Jones, Rui-Lin Chao, Zohauddin Ahmad, Joe C. Campbell, Jin-Wei Shi. ”High-Speed Avalanche Photodiodes With Wide Dynamic Range Performance” IEEE Journal of Lightwave Technology, 2019.
[24] Xiao Meng, Shiyu Xie, Xinxin Zhou, Niccolo Calandri, Mirko Sanzaro, Alberto Tosi, Chee Hing Tan and Jo Shien Ng. ”InGaAs-InAlAs single photon avalanche diode for 1550nm photons” R. Soc. open sci.3, FEBRUARY 2016.
[25] Xiao Meng, Chee Hing Tan, Simon Dimler, John P R David, and Jo Shien Ng. ”1550 nm InGaAs/InAlAs single photon avalanche diode at room temperature” Optics Express, VOL. 22, SEPTEMBER 2014.
[26] Yan Liang, Yi Jian, Xiuliang Chen, Guang Wu, E Wu, and Heping Zeng. ”Room-Temperature Single-Photon Detector Based on InGaAs/InP Avalanche Photodiode With Multichannel Counting Ability” IEEE Photonics Technology Lettes, VOL. 23, JANUARY 2011.
[27] Mingguo Liu, Chong Hu, Xiaogang Bai, Xiangyi Guo, Joe C. Campbell, Zhong Pan, M.M. Tashima. ”High-Performance InGaAs/InP Single-Photon Avalanche Photodiode” IEEE Journal of Quantum Electronics, VOL. 13, JULY/AUGUST 2007.
[28] Alberto Tosi, Fabio Acerbi, Michele Anti, Franco Zappa. ”InGaAs/InP Single-Photon Avalanche Diode With Reduced Afterpulsing and Sharp Timing Response With 30 ps Tail” IEEE Journal of Quantum Electronics, VOL. 48, SEPTEMBER 2012.
[29] Xiaoguang Zheng. ”Long-Wavelength, High-Speed Avalanche Photodiodes and APD Arrays.” The University of Texas at Austin, PhD
81 Dissertation, DECEMBER 2004.
|