參考文獻 |
[1] Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., ... & Wicker, R. B. (2012). Metal fabrication by additive manufacturing using laser and electron beam melting technologies. Journal of Materials Science & Technology, 28(1), 1-14.
[2] O’Bryan, C. S., Bhattacharjee, T., Hart, S., Kabb, C. P., Schulze, K. D., Chilakala, I., Angelini, T. E. (2017). Self-assembled micro-organogels for 3D printing silicone structures. Science advances, 3(5), e1602800.
[3] Taylor, A. D., Kim, E. Y., Humes, V. P., Kizuka, J., & Thompson, L. T. (2007). Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cells. Journal of Power Sources, 171(1), 101-106..
[4] Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017). The role of additive manufacturing in the era of industry 4.0. Procedia Manufacturing, 11, 545-554.
[5] Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H. J., ... & Feinberg, A. W. (2015). Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels. Science Advances, 1(9), e1500758..
[6] Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015). Writing in the granular gel medium. Science Advances, 1(8), e1500655.
[7] Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015). Direct 3D printing of shear‐thinning hydrogels into self‐healing hydrogels. Advanced Materials, 27(34), 5075-5079.
[8] Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016). 3D printing PDMS elastomer in a hydrophilic support bath via freeform reversible embedding. ACS Biomaterials Science & Engineering, 2(10), 1781-1786.
[9] Tadros, T. F. (2016). Emulsions: Formation, Stability, Industrial Applications. Walter de Gruyter GmbH & Co KG.
[10] Yu, Y., Liu, F., Zhang, R., & Liu, J. (2017). Suspension 3D Printing of Liquid Metal into Self‐Healing Hydrogel. Advanced Materials Technologies, 2(11), 1700173.
[11] Stokes, J. R., & Frith, W. J. (2008). Rheology of gelling and yielding soft matter systems. Soft Matter, 4(6), 1133-1140.
[12] Nishinari, K. (2009). Some thoughts on the definition of a gel. In Gels: Structures, Properties, and Functions (pp. 87-94). Springer, Berlin, Heidelberg.
[13] Wang, Z., An, G., Zhu, Y., Liu, X., Chen, Y., Wu, H., ... & Mao, C. (2019). 3D-printable self-healing and mechanically reinforced hydrogels with host–guest non-covalent interactions integrated into covalently linked networks. Materials Horizons, 6(4), 733-742.
[14] Bagheri, A., & Jin, J. (2019). Photopolymerization in 3D printing. ACS Applied Polymer Materials, 1(4), 593-611.
[15] Singh, V., Nguyen, T. P., Sheng, Y. J., & Tsao, H. K. (2018). Stress-Driven Separation of Surfactant-Stabilized Emulsions and Gel Emulsions by Superhydrophobic/Superoleophilic Meshes. The Journal of Physical Chemistry C, 122(43), 24750-24759.
[16] Patel, A. R., Rodriguez, Y., Lesaffer, A., & Dewettinck, K. (2014). High internal phase emulsion gels (HIPE-gels) prepared using food-grade components. RSC Advances, 4(35), 18136-18140.
[17] Cameron, N. R., Sherrington, D .C. (2005). Advances in Polymer Science. Springer Berlin, Heidelberg.
[18] Xu, Y. T., Liu, T. X., & Tang, C. H. (2019). Novel pickering high internal phase emulsion gels stabilized solely by soy β-conglycinin. Food Hydrocolloids, 88, 21-30.
[19] Tanaka, H., Meunier, J., & Bonn, D. (2004). Nonergodic states of charged colloidal suspensions: Repulsive and attractive glasses and gels. Physical Review E, 69(3), 031404.
[20] Lukić, M., Clarke, J., Tuck, C., Whittow, W., & Wells, G. (2016). Printability of elastomer latex for additive manufacturing or 3D printing. Journal of Applied Polymer Science, 133(4).
[21] Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., ... & Vlassak, J. J. (2017). 3D printing of transparent and conductive heterogeneous hydrogel–elastomer systems. Advanced Materials, 29(10), 1604827.
[22] Plott, J., & Shih, A. (2017). The extrusion-based additive manufacturing of moisture-cured silicone elastomer with minimal void for pneumatic actuators. Additive Manufacturing, 17, 1-14.
[23] Ono, F., Shinkai, S., & Watanabe, H. (2018). High internal phase water/oil and oil/water gel emulsions formed using a glucose-based low-molecular-weight gelator. New Journal of Chemistry, 42(9), 6601-6603.
[24] George, M., & Weiss, R. G. (2006). Low molecular-mass organic gelators. In Molecular Gels (pp. 449-551). Springer, Dordrecht.
[25] Bhattacharjee, T., Gil, C. J., Marshall, S. L., Urueña, J. M., O’Bryan, C. S., Carstens, M., ... & Sawyer, W. G. (2016). Liquid-like solids support cells in 3D. ACS Biomaterials Science & Engineering, 2(10), 1787-1795.
[26] Shanti, R., Hadi, A. N., Salim, Y. S., Chee, S. Y., Ramesh, S., & Ramesh, K. (2017). Degradation of ultra-high molecular weight poly (methyl methacrylate-co-butyl acrylate-co-acrylic acid) under ultra violet irradiation. RSC advances, 7(1), 112-120.
[1] Tadros, T. F. (2016). Emulsions: Formation, Stability, Industrial Applications. Walter de Gruyter GmbH & Co KG.
[2] Soma, J., & Papadopoulos, K. D. (1996). Ostwald ripening in sodium dodecyl sulfate-stabilized decane-in-water emulsions. Journal of Colloid and Interface Science, 181(1), 225-231.
[3] Alam, M. M., & Aramaki, K. (2008). Hexagonal phase based gel-emulsion (O/H1 gel-emulsion): Formation and rheology. Langmuir, 24(21), 12253-12259.
[4] McClements, D. J., Dungan, S. R., German, J. B., Simoneau, C., & Kinsella, J. E. (1993). Droplet size and emulsifier type affect crystallization and melting of hydrocarbon‐in‐water emulsions. Journal of Food Science, 58(5), 1148-1151.
[5] TAN, Ying, et al. Fabrication of starch-based nanospheres to stabilize pickering emulsion. Carbohydrate polymers, 2012, 88.4: 1358-1363.
[6] Tan, Y., Xu, K., Liu, C., Li, Y., Lu, C., & Wang, P. (2012). Fabrication of starch-based nanospheres to stabilize pickering emulsion. Carbohydrate Polymers, 88(4), 1358-1363.
[7] Delmas, T., Piraux, H., Couffin, A. C., Texier, I., Vinet, F., Poulin, P., ... & Bibette, J. (2011). How to prepare and stabilize very small nanoemulsions. Langmuir, 27(5), 1683-1692.
[8] Steiner, U., Meller, A., & Stavans, J. (1995). Entropy driven phase separation in binary emulsions. Physical Review Letters, 74(23), 4750.
[9] Gupta, A., Badruddoza, A. Z. M., & Doyle, P. S. (2017). A general route for nanoemulsion synthesis using low-energy methods at constant temperature. Langmuir, 33(28), 7118-7123.
[10] Jin, H., Wang, X., Chen, Z., Li, Y., Liu, C., & Xu, J. (2018). Fabrication of β-conglycinin-stabilized nanoemulsions via ultrasound process and influence of SDS and PEG 10000 co-emulsifiers on the physicochemical properties of nanoemulsions. Food Research International, 106, 800-808.
[11] Perazzo, A., Preziosi, V., & Guido, S. (2015). Phase inversion emulsification: Current understanding and applications. Advances in Colloid and Interface Science, 222, 581-599.
[12] Pusey, P. N., & van Megen, W. (1987). Observation of a glass transition in suspensions of spherical colloidal particles. Physical Review Letters, 59(18), 2083.
[13] Wang, L., Mutch, K. J., Eastoe, J., Heenan, R. K., & Dong, J. (2008). Nanoemulsions prepared by a two-step low-energy process. Langmuir, 24(12), 6092-6099.
[14] Porras, M., Solans, C., Gonzalez, C., & Gutierrez, J. M. (2008). Properties of water-in-oil (W/O) nano-emulsions prepared by a low-energy emulsification method. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 324(1-3), 181-188.
[15] Tong, K., Zhao, C., Sun, Z., & Sun, D. (2015). Formation of concentrated nanoemulsion by W/O microemulsion dilution method: biodiesel, tween 80, and water system. ACS Sustainable Chemistry & Engineering, 3(12), 3299-3306.
[16] Song, D., Zhang, W., Gupta, R. K., & Melby, E. G. (2011). Role of operating conditions in determining droplet size and viscosity of tackifier emulsions formed via phase inversion. AIChE Journal, 57(1), 96-106.
[17] Kotlarchyk, M., Chen, S. H., Huang, J. S., & Kim, M. W. (1984). Structure of three-component microemulsions in the critical region determined by small-angle neutron scattering. Physical Review A, 29(4), 2054.
[18] Koneva, A. S., Safonova, E. A., Kondrakhina, P. S., Vovk, M. A., Lezov, A. A., Chernyshev, Y. S., & Smirnova, N. A. (2017). Effect of water content on structural and phase behavior of water-in-oil (n-decane) microemulsion system stabilized by mixed nonionic surfactants SPAN 80/TWEEN 80. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 518, 273-282.
[19] Forgiarini, A., Esquena, J., González, C., & Solans, C. (2000). Studies of the relation between phase behavior and emulsification methods with nanoemulsion formation. In Trends in Colloid and Interface Science XIV (pp. 36-39). Springer, Berlin, Heidelberg.
[20] Gupta, A., Badruddoza, A. Z. M., & Doyle, P. S. (2017). A general route for nanoemulsion synthesis using low-energy methods at constant temperature. Langmuir, 33(28), 7118-7123.
[21] Fogden, A., Hyde, S. T., & Lundberg, G. (1991). Bending energy of surfactant films. Journal of the Chemical Society, Faraday Transactions, 87(7), 949-955.
[22] Boyd, J. V., Parkinson, C., & Sherman, P. (1972). Factors affecting emulsion stability, and the HLB concept. Journal of Colloid and Interface Science, 41(2), 359-370.
[23] Mayer, S., Weiss, J., & McClements, D. J. (2013). Vitamin E-enriched nanoemulsions formed by emulsion phase inversion: factors influencing droplet size and stability. Journal of Colloid and Interface Science, 402, 122-130.
[24] Chang, D. P., Barauskas, J., Dabkowska, A. P., Wadsäter, M., Tiberg, F., & Nylander, T. (2015). Non-lamellar lipid liquid crystalline structures at interfaces. Advances in Colloid and Interface Science, 222, 135-147.
[25] McClements, D. J. (2012). Nanoemulsions versus microemulsions: terminology, differences, and similarities. Soft Matter, 8(6), 1719-1729.
[26] Larche, F. C., & Delord, P. (1985). Structures and stability of isotropic phases in the AOT-decane-water system. Fluid Phase Equilibria, 20, 257-264. |