博碩士論文 107326006 詳細資訊




以作者查詢圖書館館藏 以作者查詢臺灣博碩士 以作者查詢全國書目 勘誤回報 、線上人數:36 、訪客IP:3.140.196.91
姓名 吳昭緯(Chao-Wei-WU)  查詢紙本館藏   畢業系所 環境工程研究所
論文名稱 以系統動力模式評量CFSBR系統設計與操控方法之發展
相關論文
★ 彩色濾光片生產線清潔生產之改善研究★ 以離子交換法處理半導體廠氫氧化四甲基銨廢液之研究
★ 建立量測水位、MLSS濃度與SS濃度及污泥沉澱速度光學量測裝置之研究★ 奈米晶相Fe(OH)3催化臭氧反應程序處理油煙VOCs之發展
★ 無塵室揮發性有機污染物防制對策的探討★ 應用數位影像技術於廢水真色色度監測之研究
★ 污水處理廠操作最佳化之研究★ 河川流域水土資源承載力與永續力評量模式之發展
★ 單槽連續進流回分式活性污泥系統微生物菌相之研究★ 單槽連續進流回分式活性污泥系統溶氧控制之研究
★ 工業區廢水管理資訊系統之發展與建立-以觀音工業區為例★ 河川流域水管理系統動力學模式之發展與建立
★ 連續流回分式活性污泥系統好氧相曝氣控制策略之研究-線上即時量測溶氧轉換率與需氧量方法之建立★ 智慧型環境詞彙庫之發展與建置
★ 環境法規資料庫之發展與建置★ 連續流循序批分式活性污泥系統 好氧相即時曝氣控制策略之發展 — 低溶氧生物脫氮除磷程序控制技術之研究
檔案 [Endnote RIS 格式]    [Bibtex 格式]    [相關文章]   [文章引用]   [完整記錄]   [館藏目錄]   至系統瀏覽論文 (2024-11-1以後開放)
摘要(中) 由於目前針對生物處理程序的設計大多以假設進流為穩態模式模擬並作為設計操做的依據。因此未根據處理廢水的水質去設計一套專屬於處理該廢水的生物處理程序。大部分的設計者都是根據營建署所提供的設計規範進行設計,這樣造成的問題就是每個廢水處理場處理的水質不同水量不同環境不同甚至有更多影響因子,而這些都是環環相扣的並非可以透過法規所設定的值去進行決策,這也是導致許多廢水處理廠沒有辦法真正的操作控制廢水處理廠。因此本研究是建立一套CFSBR系統動力模式,可以透過此系統動力模式對CFSBR系統進行評量包含功能分析以及系統操控性分析,所得到的結果可以做為操作者進行決策的資訊以及檢討與改善CFSBR系統的依據。利用此系統可以提供操作者根據實際所需要處理的水量以及現場所監測到的數值進而去掌握活性污泥的特性,並且進行濃度的推估後判定系統是否能正常發揮功能,同時透過此系統可以檢視設計者過度設計的情況以及在操作層面可可以節省許多人力成本並且擁有更好的處理效率,減少現今許多廢水處理場設計上沒有依據並且大多都根據設計者經驗去進行設計的問題。
摘要(英) Abstract
In recent, most of the design of biological treatment procedures is based on the assumption that the inflow is a steady-state model and used as a basis for design operations. Therefore, a set of biological treatment procedures dedicated to the treatment of wastewater was not designed according to the water quality of the treated wastewater. Most designers design according to the design specifications provided by the Environmental Protection Agency. This causes the problem that each wastewater treatment plant treats different water quality, different water quantities, and different environments. There are even more influencing factors, and these are all ring phases. The deduction is not based on the value set by laws and regulations to make decisions. This also causes many wastewater treatment plants to have no way to truly operate and control the wastewater treatment plants. Therefore, this research is to establish a set of CFSBR system dynamics model. Through this system dynamics model, the CFSBR system can be evaluated, including functional analysis and system controllability analysis. The results obtained can be used as information for the operator to make decisions and review and improve. The basis of the CFSBR system. Using this system can provide the operator to grasp the characteristics of activated sludge according to the actual amount of water that needs to be treated and the values monitored on the spot, and to estimate the concentration to determine whether the system can function normally. At the same time, the system can be used Examining the designer′s over-design situation and the operation level can save a lot of labor costs and have better treatment efficiency, reducing many of the current wastewater treatment plant designs without basis and most of the design problems based on the designer′s experience.
關鍵字(中) ★ 連續流循序批次活性污泥系統
★ 系統動力模式
關鍵字(英) ★ CFSBR
★ System dynamics model
論文目次 目錄
一、研究緣起 1
1.1研究目的 4
二、文獻回顧 5
2.1 廢水生物處理設計操作現存問題 5
2.2廢水生物處理設計設計操作問題的根原因 6
2.3 廢水生物處理設計操作問題的改善策略 6
2.4 CFSBR之發展 6
2.5 系統動力模式之發展 8
三、研究方法 9
3.1 研究內容與流程 9
3.2 系統動力模式的發展與建置流程與方法的建立 11
3.3 CFSBR系統之界定 11
3.3.1 以系統分析界定CFSBR系統此步驟的目的與預期結果 11
3.3.2確認CFSBR的功能、屬性及其關連 12
3.3.3確認CFSBR組成的功能、屬性及其關連 12
3.4 生物處理反應機制彙整 13
3.5 CFSBR運作機制之建立 13
3.5.1厭氧相運作機制之彙整 13
3.5.2缺氧相運作機制之彙整 13
3.5.3好氧相運作機制之彙整 14
3.6 CFSBR系統動力模式之建立 14
3.6.1 CFSBR系統動力模式之建立此步驟的目的以及預期結果 14
3.6.2 CFSBR系統整體層分析 16
3.6.3 CFSBR系統主功能層分析 16
3.6.4 CFSBR系統子功能層分析 17
3.6.5 CFSBR系統邏輯層分析 18
3.6.6 系統動力模式元件程式編寫與測試 18
3.6.7 系統動力模式組成程式編寫與測試 21
3.6.8 系統動力模式子系統程式編寫與測試 21
3.6.9 系統動力模式整體系統程式編寫與測試 22
3-7 CFSBR系統設計之評量 23
3.7.1 CFSBR系統設計之評量此步驟的目的與預期結果 23
3.7.2利用系統動力模式評量CFSBR系統設計之評量流程建立 23
3.7.3利用系統動力模式評量CFSBR方法之建立 25
四、結果與討論 27
4.1系統動力模式的發展與建置流程與方法的建立 27
4.2 CFSBR系統之界定 30
4.2.1確認CFSBR的功能、屬性及其關連 30
4.2.2 確認CFSBR組成的功能、屬性及其關連 35
4.3生物處理反應機制彙整 38
4.4CFSBR運作機制之建立 57
4.5 CFSBR系統動力模式之建立 66
4.5.1 CFSBR系統整體層分析 66
4.5.2 CFSBR系統主功能層分析 69
4.5.3CFSBR系統子功能層分析 74
4.5.4CFSBR系統邏輯層之分析 78
4.5.5系統動力模式元件程式編寫與測試 91
4.5.6系統動力模式組成(子功能層)程式編寫與測試 102
4.5.7系統動力模式主功能層程式編寫與測試 107
4.5.8系統動力模式整體層程式編寫與測試 108
4.5.9測試結果 108
4.6系統動力模式評量CFSBR系統之設計 114
4.6.1利用系統動力模式評量CFSBR系統設計之評量流程建立 115
4.6.2評量CFSBR設計各個步驟的方法之建立 116
4.6.3 以模場為案例進行評量 121
五、結論與建議 124
5.1結論 124
5.2建議 125
六、參考文獻 126
參考文獻 1. Baikun L. and S. Irvin, “The comparison of alkalinity and ORP as
Indicators for nitrification and denitrification in a sequencing batchreactor (SBR),” Biochemical Engineering Journal, Vol. 34,Issue 3,pp.248–255 (2007).
2. Bruce E., perry L., Environmental Biotechnology:Principles and
Applications,Mcgraw-hill,(2001).
3. Che Ok J., D. S. Lee, M. W. Lee, and J. M. Park, “Enhanced BiologicalPhosphorus Removal in an Anaerobic–Aerobic Sequencing Batch Reactor: Effect of pH,” Water Environment Research, Vol. 73,Issue 3,pp.248–255 (2001).
4. Che Ok J. and J. M. Park, “Enhanced biological phosphorus removal in asequencing batch reactor supplied with glucose as a sole carbon source,”Biochemical Engineering Journal, Vol. 34,Issue 3, pp. 301-305 (2000).
5. Jean-David Therrien , Niels Nicolaï , Peter A. Vanrolleghem “A critical review of the data pipeline how wastewater”
6. Ebrahim Shahsavan , Ali Asghar Ebrah “Developing a system dynamics model for prediction of phosphorus in stabilization ponds facultative”(2019)
7. Komal Rathore “Dynamic Modeling of an Advanced Wastewater Treatment Plant”(2018)
8. Y. TIMOSHKINA , S . R . B I SHOP ,“System Dynamics Applied to Operations and Policy Decisions”
9. 楊素真“單槽連續進流回分式活性污泥系統處理動態進流污水自動
控制之研究”,碩士論文,國立中央大學環境工程研究所(1998)
10. 陳義昇,“CFSBR 厭氧相/沉澱相/排水相/排泥相即時控制系統改良之
研究”,碩士論文,國立中央大學環境工程研究所(2005)
11. 尤世雄, “CFSBR水質推估攻勢之發展與建立”,碩士論文,國立中央大學(2006)
12. 陳政傑,”利用系統動力模式建立CFSBR即時自動操作與控制策略之研究”,碩士論文(2014)
13. 白子易,” 下水道系統生化動力模式建立之研究”,博士論文(2001)
指導教授 廖述良 審核日期 2021-10-28
推文 facebook   plurk   twitter   funp   google   live   udn   HD   myshare   reddit   netvibes   friend   youpush   delicious   baidu   
網路書籤 Google bookmarks   del.icio.us   hemidemi   myshare   

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明