參考文獻 |
[1] Daisy Chuang:日本朝氫能社會目標邁進,10 MW世界最大再生能源製氫廠完工。2020年03月11日,取自https://technews.tw/2020 /03/11/jp-solar-powered-hydrogen-10mw/。
[2] 洪明豪,「鑭鈣鐵氧化物作為固態氧化物燃料電池陰極之相關性質」,國立台灣科技大學,碩士論文,民國95年。
[3] I.R.D. Larramendi, N. Ortiz-Vitoriano, I. B. Dzul-Bautista, T. Rojo, “Designing Perovskite Oxides for Solid Oxide Fuel Cells”, IntechOpen, Rijeka, 2016.
[4] Q.Y. Lin, J. Lin, T. Liu, C.R. Xia, C.S. Chen, “Solid oxide fuel cells supported on cathodes with large straight open pores and catalyst- decorated surfaces”, Solid State Ionics, Vol. 323, pp. 130-135, 2018.
[5] L. dos Santos-Gómez, E.R. Losilla, F. Martín, J.R. Ramos-Barrado, D. Marrero-López, “Novel Microstructural Strategies to Enhance the Electrochemical Performance of La0.8Sr0.2MnO3−δ Cathodes”, ACS Applied Materials & Interfaces, Vol. 7, pp. 7197-7205, 2015.
[6] L.F. Nie, J.C. Liu, Y.J. Zhang, M.L. Liu, “Effects of pore formers on microstructure and performance of cathode membranes for solid oxide fuel cells”, Journal of Power Sources, Vol. 196, pp. 9975-9979, 2011.
[7] H.D. Tang, Z.Z. Jin, Y.S. Wu, W. Liu, L. Bi, “Cobalt-free nanofiber cathodes for proton conducting solid oxide fuel cells”, Electrochemistry Communications, Vol. 100, pp. 108-112, 2019.
[8] Y. Chen, Y.F. Bu, B.T. Zhao, Y.X. Zhang, D. Ding, R.Z. Hu, T. Wei, B. Rainwater, Y. Ding, F.L. Chen, C.H. Yang, J. Liu, M.L. Liu, “A durable, high-performance hollow-nanofiber cathode for intermediate- temperature fuel cells”, Nano Energy, Volume 26, pp. 90-99, 2016.
[9] S. Shahgaldi, Z. Yaakob, D.J. Khadem, M. Ahmadrezaei, W.R.W. Daud, “Synthesis and characterization of cobalt-free Ba0.5Sr0.5Fe0.8Cu0.2O3−δ perovskite oxide cathode nanofibers”, Journal of Alloys and Compounds, Vol. 509, pp. 9005-9009, 2011.
[10] Q. Li, L.P. Sun, H. Zhao, H.L. Wang, L.H. Huo, A. Rougier, S. Fourcade, J.C. Grenier, “La1.6Sr0.4NiO4 one-dimensional nanofibers as cathode for solid oxide fuel cells”, Journal of Power Sources, Vol. 263, pp. 125-129, 2014.
[11] W.R. Grove, “On voltaic series and the combination of gases by platinum”, Philosophical Magazine Series 3, Vol. 14, pp. 127-130, 1839.
[12] G. Hoogers, “Fuel cell technology handbook. CRC press”, 2002.
[13] K. Xie, R.Q. Yan, X.Q. Liu, “A novel anode supported BaCe0.4Zr0.3Sn0.1Y0.2O3-δ electrolyte membrane for proton conducting solid oxide fuel cells”, Electrochemistry Communications, Vol. 11, pp. 1618-1622, 2009.
[14] H. Moon, S.D. Kim, E.W. Park, S.H. Hyun, H.S. Kim, “Characteristics of SOFC single cells with anode active layer via tape casting and cofiring”, International Journal of Hydrogen Energy, Vol. 33, pp. 2826-2833, 2008.
[15] B.H. Rainwater, M.F. Liu, M.L. Liu, “A more efficient anode microstructure for SOFCs based on proton conductors”, International Journal of Hydrogen Energy, Vol. 37, pp. 18342-18348, 2012.
[16] M. Zunic, L. Chevallier, A. Radojkovic, G. Brankovic, Z. Brankovic, E.D. Bartolomeo, “Influence of the ratio between Ni and BaCe0.9Y0.1O3-δ on microstructural and electrical properties of proton conducting Ni- BaCe0.9Y0.1O3-δ anodes”, Journal of Alloys and Compounds, Vol. 509, pp. 1157-1162, 2011.
[17] J. Jing, J. Pang, L. Chen, H. Zhang, Z. Lei, Z. Yang, “Structure, synthesis, properties and solid oxide electrolysis cells application of Ba(Ce, Zr)O3 based proton conducting materials”, Chemical Engineering Journal, Vol. 429, pp. 132214, 2022.
[18] Y. Yoo, N. Lim, “Performance and stability of proton conducting solid oxide fuel cells based on yttrium-doped barium cerate -zirconate thin film electrolyte.”, Journal of Power Sources, Vol. 229, pp. 48-57, 2013.
[19] J.H. Kim, J. Hong, D-K. Lim, S. Ahn, J. Kim, J.K. Kim, DH. Oh, SH. Jeon, S-J. Song, WC. Jung, “Water as a hole-predatory instrument to create metal nanoparticles on triple-conducting oxide.”, Energy & Environmental Science, Vol. 15, pp. 1097, 2022.
[20] T-H. Lee, L. Fan, C-C. Yu, F.E. Wiria, P-C. Su, “A high-performance SDC-infiltrated nanoporous silver cathode with superior thermal stability for low temperature solid oxide fuel cells.”, Journal of Materials Chemistry A, Vol. 6, pp. 7357-7363, 2018.
[21] C. Zhao, Y. Li, W. Zhang, Y. Zhang, X. Lou, B. Yu, J. Chen, Y. Chen, M. Liu, J. Wang, “Heterointerface engineering for enhancing the electrochemical performance of solid oxide cells.”, Energy & Environmental Science, Vol. 13, pp. 53-85, 2020.
[22] U. Schubert, N. Husing, “Synthesis of inorganic materials”, second, revised and updated edition, ISBN: 978-3-527-31037-1, 2004.
[23] K. Katahira, Y. Kohchi, T. Shimura, and H. Iwahara, “Protonic conduction in Zr-substituted BaCeO3”, Solid State Ionics, Vol. 138, pp. 91-98, 2000.
[24] R.B. Cervera, Y. Oyama, S. Yamaguchi, “Low temperature synthesis of nanocrystalline proton conducting BaZr0.8Y0.2O3−δ by sol–gel method”, Solid State Ionics, Vol. 178, pp. 569-574, 2007.
[25] D.H. Huang, “Synthesis and Electrochemical Properties of Sm-doped and Bi-doped Cerium Oxides Prepared by a Low Temperature Hydrothermal Method for SOFC Electrolyte”, National Taiwan Normal University, 2004.
[26] W. Zhou, Z.P. Shao, R. Ran, H.X. Gu, W.Q. Jin, N.P. Xu, “LSCF nanopowder from cellulose-glycine-nitrate process and its application in intermediate-temperature solid-oxide fuel cells”, The American Ceramic Society, Vol. 91, pp. 1155-1162, 2008.
[27] A. Aytimur, S. Kocyigit, I. Uslu, “Calcia stabilized ceria doped zirconia nanocrystalline ceramic”, Journal of Inorganic and Organometallic Polymers and Materials, Vol. 24, pp. 927-932, 2014.
[28] S. Ramakrishna, K. Fujihara, W.E. Teo, T.C. Lim, Z. Ma. An Introduction to Electrospinning and Manofibers. World Scientific.
[29] N. Bhardwaj, SC. Kundu, “Electrospinning: A fascinating fiber fabrication technique”, Biotechnology Advances, Vol. 28, pp. 325-347, 2010.
[30] A. Khalf, SV. Madihally, “Recent advances in multiaxial electro- spinning for drug delivery”, European Journal of Pharmaceutics and Biopharmaceutics, Vol. 112, pp.1-17, 2016.
[31] S.T. Aruna, L.S. Balaji, S. Senthil Kumar, B. Shri Prakash, “Electrospinning in solid oxide fuel cells - a review”, Renewable and Sustainable Energy Reviews, Vol. 67, pp. 673-682, 2017.
[32] X. Zhu, Z. Lü, B. Wei, X. Huang, Y. Zhang, W. Su, “A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods”, Journal of Power Sources, Vol. 196, pp. 729-733, 2011.
[33] M. Jabbari, R. Bulatova, A.I.Y. Tok, C.R.H. Bahl, E. Mitsoulis, J.H. Hattel, “Ceramic tape casting: a review of current methods and trends with emphasis on rheological behaviour and flow analysis”, Materials Science and Engineering: B, Vol. 212, pp. 39-61, 2016.
[34] J.M. Serra, W.A. Meulenberg, “Thin‐film proton BaZr0.85Y0.15O3 conducting electrolytes: toward an intermediate‐temperature solid oxide fuel cell alternative”, Journal of the American Ceramic Society, Vol. 90, pp. 2082-2089, 2007.
[35] Baharuddin, Nurul Akidah, Andanastuti Muchtar, Mahendra Rao Somalu, “Short review on cobalt-free cathodes for solid oxide fuel cells”, International Journal of Hydrogen Energy, Vol. 42, pp. 9149-9155, 2017.
[36] T. Takahashi, H. Iwahara, “Ionic conduction in perovskite-type oxide solid solution and its application to the solid electrolyte fuel cell”, Energy Conversion, Vol. 11, pp. 105-111, 1971.
[37] Y. Zhang, R. Knibbe, J. Sunarso, Y. Zhong, W. Zhou, Z. Shao, Z. Zhu, “Recent progress on advanced materials for solid‐oxide fuel cells operating below 500 °C”, Advanced Materials, Vol. 29, pp.170132-170160, 2017.
[38] S. Suna, Z. Cheng, “Electrochemical behaviors for Ag, LSCF and BSCF as oxygen electrodes for proton conducting IT-SOFC”, Journal of The Electrochemical Society, Vol. 164, pp. F3104-F3113, 2017.
[39] R.R. Peng, T.Z. Wu, W. Liu, X.Q. Liu, G.Y. Meng, “Cathode processes and materials for solid oxide fuel cells with proton conductors as electrolytes”, Journal of Materials Chemistry, Vol. 20, pp. 6218-6225, 2010.
[40] J. Larminie and A. Dicks, “Fuel Cell System Explained”, 1th Edition, JOHN WILEY & SONS, Inc. , England, 2000.
[41] N. Hildenbrand, Improving the electrolyte-cathode assembly for mt-SOFC., Ipskamp Printing., Netherlands, 2011.
[42] 蕭旭庭,「Pr1-XSrXCoO3-δ固態氧化物燃料電池陰極材料研究」,國立中山大學,碩士論文,民國105年。
[43] K. Kordesch and G. Simader, “Fuel Cells and Their Applications”, VCH, New York, 1996.
[44] A. Poursaee, “Corrosion sensing for assessing and monitoring civil infrastructures”, Sensor Technologies for Civil Infrastructures, Vol 1, pp. 357-382, 2014.
[45] ]N. Y. Hsu, S. C. Yen, K. T. Jeng, C. C. Chien, “Impedance studies and modeling of direct methanol fuel cell anode with interface and porous structure perspectives”, Journal Power Sources, Vol. 161, pp.232, 2006.
[46] F. H. van Heuveln and H. J. M. Bouwmeester,” Electrode Properties of Sr‐Doped LaMnO3 on Yttria‐Stabilized Zirconia: II. Electrode Kinetics”, Journal of The Electrochemical Society, Vol. 144, pp.134, 1997.
[47] Y. J. Leng, S. H. Chen, K. A. Khor, and S. P. Jiang, “Performance evaluation of anode-supported solid oxide fuel cells with thin film YSZ electrolyte”, International Journal of Hydrogen Energy, Vol. 29, pp.1025-1033, 2004.
[48] G. Yang, W. Jung, S.J. Ahn, D. Lee, “Controlling the Oxygen Electrocatalysis on Perovskite and Layered Oxide Thin Films for Solid Oxide Fuel Cell Cathodes”, Applied Sciences, Vol. 9, pp. 1030, 2019.
[49] T.J. Huang, C.L. Chou, “Oxygen Dissociation and Interfacial Transfer Rate on Performance of SOFCs with Metal-Added (LaSr)(CoFe)O3 -(Ce,Gd)O2–δCathodes”, Fuel Cells, Vol. 4, pp. 718-725, 2010. |