參考文獻 |
內政部(1997),「建築技術規則」。
田永銘、黃致維、黃森暉、裴文彬,(2021)「裂隙岩體隧道、岩坡與基礎之異向性工程行為」,科技部專題研究計畫期中進度報告,MOST 109-2221-E-008-015。
任光正(2022),「裂隙岩體之基礎承載力異向性與變異性」,碩士論文,國立中央大學土木工程學系,中壢https://hdl.handle.net/11296/anpck6
行政院農委會(2010),「水土保持技術規範」。
吳柏翰(2019),「正交性合成岩體之模擬技術」,碩士論文,國立中央大學土木工程學系,中壢。https://hdl.handle.net/11296/du7t6z
李錫堤(2011),「草嶺大崩山之地質與地形演變」,中華水土保持學報,第42期,第325~335頁。https://doi.org/10.29417/jcswc.201112_42(4).0006
林邵儒(2019),「逆向斜交坡中不同節理組特性對楔形岩體變形及破壞機制影響之探討影響」,碩士論文,國立臺灣大學工學院土木工程學系,台北。https://hdl.handle.net/11296/839794
洪如江(2002),「順向坡之破壞與穩定」,地工技術,第94期,第5~18頁。https://doi.org/10.30140/sg.200212.0001
洪如江、李錫堤、林美聆、林銘郎、鄭富醬、陳正興(2000),「天塹可以飛渡、崩山足以斷流(草嶺順向坡滑動)」,地工技術,第77期,第5~18頁。
陳宏宇(2000),「台灣山崩之工程地質特性」,地工技術,第79期,第59~70頁。https://doi.org/10.30140/sg.200006.0005
黃致維(2020),「利用合成岩體模擬橫向等向性岩體之基礎承載力」,碩士論文,國立中央大學土木工程學系,中壢。https://hdl.handle.net/11296/67xh2b
黃清修(2023),「邊界條件對不同斜交角之岩坡崩塌行為影響」,碩士論文,國立中央大學土木工程學系,中壢。https://hdl.handle.net/11296/6v7q3z
黃森暉(2022),「從順向坡至逆向坡之崩塌行為模擬」,碩士論文,國立中央大學土木工程學系,中壢。https://hdl.handle.net/11296/d87t72
黃鑑水、何信昌、劉桓吉(1983),「台灣中部草嶺地區之地質與山崩」經濟部中央地質調查所彙刊,第二號,第95頁~112頁。
http://gis.geo.ncu.edu.tw/GIS/slope/tsaoling/tsaoling.htm
黃宥傑,蘇仁偉,蘇芳郁,王泰典,鄭富書(2021),「板岩邊坡穩定受不連續面影響探討-以田古爾溪口附近為例」,第18屆大地工程學術研究討論會論文集,屏東。
經濟部地質調查及礦業管理中心(地質資料整合查詢)。
廖智偉(2003),「膠結不良砂岩淺基礎模型承載行為」,國立交通大學土木工程系,碩士論文,新竹(2003)。https://hdl.handle.net/11296/4jf77h
劉英助(2002),「人造膠結不良砂岩之模型承載試驗設備建立與淺基礎承載試驗」,國立交通大學土木工程學系,碩士論文,新竹。https://hdl.handle.net/11296/krbk7h
劉家豪(2019),「橫向等向性合成岩體之力學行為及其變異性」,碩士論文,國立中央大學土木工程學系,中壢。https://hdl.handle.net/11296/4qp725
盧育辰(2009),「以UDEC模擬互層材料之力學行為」,碩士論文,國立中央大學土木工程學系,中壢。https://hdl.handle.net/11296/vx9jt4
潘國樑(2007),「工程地質學導論」,科技圖書,第300頁。
Adhikary, D. P., Dyskin, A. V., Jewell, R. J. and Stewart, D. P. (1997) “A study of the mechanism of flexural toppling failures of rock slopes,” J. Rock Mechanics and Rock Engineering, Vol. 30, No.2, pp.75–93.
Anbalagan, R., Sharma, S., & Raghuvanshi, T. K. (1992). “Rock mass stability evaluation using modified SMR approach,” In Proceedings of the 6th National Symposium on Rock Mechanics, pp. 258–268, Bangalore, India.
Bieniawski, Z.T. (1979) “The Geomechanics Classification in Rock Engineering Application,” Proceeding 4th International Congress on Rock Mechanics, Montreux, pp. 41-48.
Bieniawski, Z.T. (1984) “The design process in Rock Engineering,” Rock Mechanics and Rock Engineering, Vol. 17, No. 3, pp. 183–190. https://doi.org/10.1007/BF01042549
Chang, K. J., Taboada, A., Chan, Y. C. (2005) “Geological and morphological study of the Jiufengershan landslide triggered by the Chi-Chi Taiwan earthquake,” Engineering Geology, vol.71, pp.293-309. https://doi.org/10.1016/j.geomorph.2005.02.004
Chen, C. H., Ke, C. C., Wang, C.-L. (2009) “A back-propagation network for the assessment of susceptibility to rock slope failure in the eastern portion of the Southern Cross-Island Highway in Taiwan,” Environmental Geology, Vol. 57, No. 4, pp. 723-733.
https://doi.org/10.1007/s00254-008-1350-9
Copons, R., Vilaplana, J.M., Linares, R. (2009) “Rockfall travel distance analysis by using empirical models (Sola` d’Andorra la Vella, Central Pyrenees), ” Natural Hazards and Earth System Sciences, Vol. 9, pp.2107-2118. https://doi.org/10.5194/nhess-9-2107-2009
Cundall, P. A., Pierce, M., Ivars, D. M. (2008) Quantifying the size effect of rock mass strength, Proceedings of the First South Hemisphere International Rock Mechanics Symposium, Australia, 3-15. https://doi.org/10.36487/ACG_repo/808_31
Deere, D. U., & Miller, R. (1966) “Engineering classification and index properties for intact rock,” National Technical Information Service Springfield, VA, USA.
Dershowitz, W. S. (1985) “Rock joint system, Doctoral dissertation, Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.
Dershowitz, W. S., and Herda, H. H. (1992) “Interpretation of fracture spacing and intensity,” Proc 32nd US Rock Mech Symp, Santa Fe, NM, 757-766.
Dhiman, R.K., Thakur, M. (2022) “Graphical charts for onsite Continuous Slope Mass Rating (CoSMR) classification using strike parallelism and joint dip or plunge of intersection” Engineering Geology, Vol. 298.
https://doi.org/10.1016/j.enggeo.2022.106559
Einstein, H. H., & Baecher, G. B. (1983). Probabilistic and statistical methods in engineering geology - Specific method and examples - Part I: Exploration. Rock Mechanics and Rock Engineering, Vol.16, pp.39-72.
https://link.springer.com/article/10.1007/BF01030217
Esmaieli, K., Hadjigeorgiou, J., and Grenon, M. (2010) “Estimating geometrical and mechanical rev based on synthetic rock mass models at Brunswick Mine,” International Journal of Rock Mechanics and Mining Sciences, Vol. 47, No. 6, pp. 915–926.
https://doi.org/10.1016/j.ijrmms.2010.05.010
Goodman, Richard E., ASCE, M., and Bray John W. (1976) “Toppling of Rock Slopes,” Proceeding of the Specialty Conference on Rock Engineering for Foundations and Slopes ASCE/Boulder, Colorado, August, pp.15-18.
Goodman, R.E. (1989) “Introduction to Rock Mechanics,” vol. 2, John Wiley & Sons, New York, pp. 8–305.
Guo, J., Wu, Z. W., and Liu, K. (2023). “Stability analysis of soft-hard-interbedded anti-inclined rock slope,” Scientific Reports, Vol.13(1).
https://doi:10.1038/s41598-023-28657-2
Hoek, E., Bray, J.W. (1981). “Rock Slope Engineering” The Institution of Mining and Metallurgy, London.
Hoek, E., and Brown, E. T. (1997). “Practical estimates of rock mass strength,” International Journal of Rock Mechanics and Mining Sciences, Vol. 34, No. 8, pp. 1165-1186.
https://doi.org/10.1016/S1365-1609(97)80069-X
Holt, R. M., Kjolaas, J., Larsen, I., Li, L., Pillitteri, A. G., Sonstebo, E. F. (2005). “Comparison between controlled laboratory experiments and discrete particle simulations of the mechanical behaviour of rock,” International Journal of Rock Mechanics and Mining Sciences, Vol.42, No. 7-8, pp. 985-995.
https://doi.org/10.1016/j.ijrmms.2005.05.006
Hudson, John A., Harrison john P. (1997) “Engineering rock mechanics-an introduction to the principles,” Elsevier Science Ltd, UK.
Hungr, O., Corominas, J., and Eberhardt, E. (2005) “Estimating landslide motion mechanism, travel distance and velocity,” Landslide Risk Management,Vancouver, B.C., pp. 109-138.
Itasca Consulting Group Inc. PFC3D (Particle Flow Code in 3 dimensions) (2019), Version 6.0, MN 55401.
Kafle, K. R. (2010) “Slope Mass Rating in Niddle Moutain of Nepal: a Case Study on Landslide at Rabi Vdc Opi Village, Kavre,” Kathmandu University Journal of Science Engineering and Technology, Vol.6, No.2, pp.28-38.
Lo, C.-M., & Feng, Z.-Y. (2014). “Deformation characteristics of slate slopes associated with morphology and creep,” Engineering Geology, Vol.178, pp.132-154.
https://doi.org/10.1016/j.enggeo.2014.06.011
Lu, Y. C., Tien, Y. M., & Juang, C. H. (2017). “Uncertainty of 1D fracture intensity measurements,” Journal of Geophysical Research-Solid Earth. Vol. 122, No. 11, pp.9344-9358. https://doi.org/10.1002/2016JB013620
Mas Ivars, D., Pierce, M., Gagne, D. and Darcel, C. (2008) “Anisotropy and scale dependency in jointed rock mass strength-a synthetic rock mass study,” Proceedings of the First International FLAC/DEM Symposium on Numerical Modeling, pp. 231-239.
Mass Ivars, D. M., Pierce, M. E., Darcel, C., Reyes-Montes, J., Potyondy, D. O., Young, R. P., & Cundall, P. A. (2011) “The synthetic rock mass approach for jointed rock mass modelling,” International Journal of Rock Mechanics and Mining Sciences, Vol. 48, No. 2, pp. 219-244. https://doi.org/10.1016/j.ijrmms.2010.11.014
Mas Ivars, D. (2010) “Bonded particle model for jointed rock mass,” KTH.
Pastor, J. L., Riquelme, A. J., Tomás, R., & Cano, M. (2019) “Clarification of the slope mass rating parameters assisted by SMRTool, an open-source software,” Bulletin of Engineering Geology and the Environment, pp.1-12.
Pierce, M., Ivars, D.M., and Sainsbury, B. (2009). “Use of Synthetic Rock Masses (SRM) to Investigate Jointed Rock Mass Strength and Deformation Behavior,” In: Anonymous proceedings of the international conference on rock joints and jointed rock masses, Tucson, Arizona, USA.
Potyondy, D. O., & Cundall, P. A. (2004) “A bonded-particle model for rock,” International Journal of Rock Mechanics and Mining Sciences, Vol.41, No.8, pp.1329-1364.
https://doi.org/10.1016/j.ijrmms.2004.09.011
Pritchard, M. A. and Savigny, K. W. (1990) “Numerical modelling of toppling,” Can. Geotech. J., Vol. 27, pp.823–34. https://doi.org/10.1139/t90-095
Pritchard, M. A. and Savigny, K. W. (1991) “The Heather Hill landslide: an example of a large scale toppling failure in a natural slope,” Can. Geotech. J., pp. 28, 410–22.
Richards, L., Leg, G., and Whittle, R. (1978) “Appraisal of stability conditions in rock slopes,” Foundation engineering in difficult ground. Newnes-Butterworths, London, pp. 449-512.
Riquelme, A. J., Tomás, R., & Abellán, A. (2016) “Characterization of rock slopes through slope mass rating using 3D point clouds,” International Journal of Rock Mechanics and Mining Sciences, Vol. 84, pp.165-176. https://doi.org/10.1016/j.ijrmms.2015.12.008
Romana M. (1985) “New adjustment ratings for application of Bieniawski classification to slopes,” Proceedings of the International Symposium on the Role of Rock Mechanics in Excavations for Mining and Civil Works, Zacatecas, pp. 49-53.
Romana M. (1993) “A geomechanical classification for slopes: Slope Mass Rating,” Comprehensive Rock Engineering, JA Hudson, ed. Oxford: Pergamon Press.
https://doi.org/10.1016/B978-0-08-042066-0.50029-X
Romana, M., Tomás, R., Serón, J.B. (2015), “Slope Mass Rating (SMR) geomechanics classification: thirty years review”, ISRM Congress 2015 Proceedings - International Symposium on Rock Mechanics, Quebec, Canada, May 10 to 13.
Salvini, R., Francioni, M., Riccucci, S., Bonciani, F., & Callegari, I. (2013) “Photogrammetry and laser scanning for analyzing slope stability and rock fall runout along the Domodossola–Iselle railway, the Italian Alps,” Geomorphology, Vol. 185, pp.110-122.
https://doi.org/10.1016/j.geomorph.2012.12.020
Shou, K. J., Wang, C. F. (2003) “Analysis of the Chiufengershan landslide triggered by the 1999 Chi-Chi earthquake in Taiwan,” Engineering Geolory, vol.68, pp.237-500.
https://doi.org/10.1016/s0013-7952(02)00230-2
Siddique, T., Alam, M.M., Mondal, M.E.A. (2015) “Slope mass rating and kinematic analysis of slopes along the national highway-58 near Jonk, Rishikesh, India,” Vol. 7, No. 5, pp. 600-606. https://doi.org/10.1016/j.jrmge.2015.06.007
Singh, B., and Goel, R. K. (2012) “Engineering Rock Mass Classifications, ” Waltham MA: Butterworth-Heinemann, Elsevier.
https://doi.org/10.1016/C2010-0-64994-7
Tao, Z., Zhu, C., He, M. and Karakus, M. (2021) “A physical modeling-based study on the control mechanisms of Negative Poisson′s ratio anchor cable on the stratified toppling deformation of anti-inclined slopes,”. International Journal of Rock Mechanics and Mining Sciences, Vol.138, 104632.
https://doi.org/10.1016/j.ijrmms.2021.104632
Tang, C. L., Hu, J. C., Lin, M. L., Angelier, J., Lu, C. Y., Chan, Y. C., and Chu, H. T. (2009). “The Tsaoling landslide triggered by the Chi-Chi earthquake, Taiwan: Insights from a discrete element simulation,” Engineering Geology, Vol.106, No. 1, pp. 1-19.
https://doi.org/10.1016/j.enggeo.2009.02.011
Tomás, R., Delgado, J., Seracute{o}n, J.B. (2007) “Modification of slope mass rating (SMR) by continuous functions” International Journal Of Rock Mechanics andMining Sciences, Vol.44, No.7, pp.1062-1069.
https://doi.org/10.1016/j.ijrmms.2007.02.004
Wang, W. N., Chigira M., Furuya, T. (2003) “Geological and geomorphological precursors of the Chiu-fen-erh-shan landslide triggered by the Chi-chi earthquake in central Taiwan,” Engineering Geology, vol.69, No.1-2, pp.1-13.
https://doi.org/10.1016/s0013-7952(02)00244-2
Weng, M. C., Chen, T. C. ans Tsai, S. J. (2017) “Modeling Scale Effects on Consequent Slope Deformation by Model Tests and the Discrete Element Method,” Landslides, Vol.14, pp. 987-993.
https://doi.org/10.1007/s10346-016-0774-7
Weng, M.-C., Chang, C.-Y., Jeng, F.-S., and Li, H.-H. (2020) “Evaluating the stability of anti-dip slate slope using an innovative failure criterion for foliation,” Engineering Geology, Vol. 275, No. 20, pp. 105737.
https://doi.org/10.1016/j.enggeo.2020.105737
Wyllie, Duncan C., Mah, Christopher W. (2004)., “Rock Slope Engineering” Taylor & Francis e-Library, London.
Yan, S., Du, H., Chen, Y., Wang, X. (2018) “Dynamic Stability Safety Evaluation of Consequent Rock Slopes,” 2017 3rd International Forum on Energy, Environment Science and Materials, pp. 1519-1528.
http://doi.org/10.2991/ifeesm-17.2018.277
Yeh, P.-T., Chen, I.-H., Lee, K.Z.-Z., Chang, K.-T. (2022) “Graphical comparison of numerical analysis, slope mass rating, and kinematic analysis for the effects of weak plane orientations on rock slope stability,” Engineering Geology, vol. 311, pp. 17.
https://doi.org/10.1016/j.enggeo.2022.106900 |