稀疏排列之LED直下式背光板之二次光學設計

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：61

、訪客IP：3.139.86.160

姓名

彭柏翔(Bo-Xiang Peng) 查詢紙本館藏

畢業系所

光電科學與工程學系

論文名稱

稀疏排列之LED直下式背光板之二次光學設計
(Secondary Optical Design of Sparsely-Arranged LED Direct-lit Backlight)

相關論文

★ 奈米電漿子感測技術於生物分子之功能分析	★ 表面結構擴散片之設計、製作與應用
★ 結合柱狀透鏡陣列之非成像車頭燈光型設計	★ CCD 量測儀器之研究與探討
★ 鈦酸鋇晶體非均向性自繞射之研究及其在光資訊處理之應用	★ 多光束繞射光學元件應用在DVD光學讀取頭之設計
★ 高位移敏感度之全像多工光學儲存之研究	★ 利用亂相編碼與體積全像之全光學式光纖感測系統
★ 體積光柵應用於微物3D掃描之研究	★ 具有偏極及光強分佈之孔徑的繞射極限的研究
★ 三維亂相編碼之體積全像及其應用	★ 透鏡像差的量測與MTF的驗證
★ 二位元隨機編碼之全像光學鎖之研究	★ 亂相編碼於體積全像之全光學分佈式光纖感測系統之研究
★ 自發式相位共軛鏡之相位穩定與應用於自由空間光通訊之研究	★ 體積全像空間濾波器應用於物體三度空間微米級位移之量測

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 (2028-8-1以後開放)

摘要(中)

本論文成功提出使用雙晶封裝之白光LED 光源用於直下式背光板之二次光學設計方法。在商業考量下，此二次光學設計透鏡具有降低直下式背光板之光源使用顆數，來達成稀疏排列之效果。此論文研究具有四大部分，分別為光源模型建立、直下式背光板之二次光學設計、透鏡模型製作與透鏡實驗驗證，光形黃暈分析與黃暈解決技術。在本研究中，我們將雙晶封裝之白光LED藉由權重因子來建立其光源模型。在透鏡模型製作與實驗驗證階段，我們根據二次光學設計結果製作了相應的透鏡模型，並進行了實驗驗證。接著由於打樣模型的實驗光形具有黃暈的現象，此現象在我們使用單色之光源模型無法表現出，因此我們藉由藍光與黃光強度分布之權重因子優化原始的白光LED光源模型，此藍光與黃光之光源模型可於解釋實際樣品具有黃暈的問題。

摘要(英)

This paper successfully proposes a secondary optical design method using white light LED with dual crystal packaging for direct-type backlight modules. From a commercial perspective, this secondary optical design approach allows for a sparse arrangement of light sources, reducing the number of LEDs required in the direct-type backlight module. The research in this paper consists of four main parts: the establishment of a light source model, the secondary optical design for direct-type backlight modules, the fabrication and experimental verification of lens models, and the analysis and resolution of yellow halo effects. In this study, we establish the light source model of Phosphor-converted white LED (abbreviated as pcW-LED) with dual crystal packaging using weighting factors. In the stage of lens model fabrication and experimental verification, we create corresponding lens models based on the results of the secondary optical design and conduct experimental validation. However, due to the appearance of yellow halo effects in the experimental light distribution, which does not match the simulation results, we optimize the original white light LED light source model by adjusting the weighting factors for blue and yellow light intensity distributions. This blue and yellow light source model effectively explains the occurrence of yellow halo effects in the actual samples.

關鍵字(中)

★ 雙晶封裝之白光LED
★ 二次光學設計透鏡
★ 光源模型
★ 藍光與黃光之光源模型
★ 直下式背光板

關鍵字(英)

★ white light LED with dual crystal packaging
★ direct-type backlight modulesdirect-type backlight modules
★ secondary optical design
★ light source model
★ blue and yellow light source model

論文目次

目錄
摘要 II
ABSTRACT II
致謝 IV
目錄 VI
圖目錄 IX
第一章緒論 1
1-1 LED固態照明光學簡介 1
1-2 背光板模組結構介紹 3
1-3 研究背景與目的 8
第二章研究理論 10
2-1 幾何光學 10
2-1-1 反射定律 11
2-1-2 折射定律 14
2-1-3 全反射 15
2-2 光度學 16
2-2-1 視效函數 17
2-2-2 光度學計量單位 18
2-2-3 理想光源 22
2-3 中場擬合法 24
第三章 LED光源模型建構 27
3-1 雙晶LED光源之輻射光強度隨角度分佈量測實驗 27
3-2 建構雙晶白光LED之光源模型 31
3-3 雙晶白光LED之光源模型驗證 35
3-4 雙晶白光LED之實驗架構修正與驗證 38
第四章折射式透鏡之二階光學設計 42
4-1 光學設計概念 42
4-2 折射式透鏡之設計模擬 45
4-2-1 LED底部基板效應 47
4-2-2 LED基板效應對於光形之影響 48
4-3 折射式透鏡之設計優化 50
4-3-1 光形中心亮點之模擬分析 52
4-3-2 透鏡中間空柱對光形影響分析 55
第五章二次光學之折射式透鏡之模型製作與驗證 60
5-1 折射式透鏡之模型製作與驗證結果 60
5-2 光形之中心亮點分析 65
5-3 光形之黃暈分析 69
第六章結論 77
參考文獻 79
中英文名詞對照表 84

參考文獻

[1] A. Žukauskas, M. S. Shur, and R. Gaska, Introduction to Solid-State Lighting (Wiley-Interscience, 2002.)
[2] E. F. Schubert, Light-Emitting Diodes, 4th ed. (Cambridge University Press, New York, 2006).
[3] E. F. Schubert, and J. K. Kim, Solid-state light sources getting smart (Science, 2005).
[4] D. A. Steigerwald, J. C. Bhat, D. Collins, R. M. Fletcher, M. O. Holcomb, M. J. Ludowise, P. S. Martin, and S. L. Rudaz, “Illumination with solid state lighting technology,” IEEE Journal of Selected Topics in Quantum Electronics 8(2), 310-320 (2002).
[5] S. Nakamura, and G. Fasol, The Blue Laser Diode: GaN Based Light Emitters and Lasers (Spinger, New York, 1997).
[6] S. Muthu, F. J. P. Schuurmans, and M. D. Pashley, “Red, green, and blue LEDs for white light illumination,” IEEE Journal of Selected Topics in Quantum Electronics 8(2), 333-338(2002).
[7] Circular. For resource and waste professionals, “New EU proposals to tackle greenwashing and boost Europe’s ‘resource independence” https://www.circularonline.co.uk/news/new-eu-proposals-to-tackle-greenwashing-and-boost-europes-resource-independence/
[8] Brussels, “Green Deal: New proposals to make sustainable products the norm and boost Europe′s resource independence” https://ec.europa.eu/commission/presscorner/detail/en/ip_22_2013
[9] G. Spiazzi, S. Buso, and P. Tomasin, “Cold Cathode Fluorescent Lamp Power Supply Based on Piezoelectric Transformers,” IEEE 35th Annual Power Electronics Specialists Conference 1, 406-412 (2004).
[10] C. C. Chen, Y. T. Chung, Y. M. Chen, and T. F. Wu, “Multi-Phase Multi-Lamp Driving System for LCD Backlight,” IEEE 35th Annual Power Electronics Specialists Conference 3, 1823-1827 (2004).
[11] Samsung Electro-Mechanics Co, Ltd, “LED backlight apparatus,” U.S. Patent No. 0146530 (2006).
[12] Samsung Electro-Mechanics Co, Ltd, “LED backlight device,” U.S. Patent No.0127261 (2007).
[13] S. Aoyama, A. Funamoto, and K. Imanaka, “Hybrid normal-reverse prism coupler for light-emitting diode backlight systems,” Appl. Opt. 45, 7273-7278(2006).
[14] M. Shinohara, J. Takagi, M. Oba, and M. Takeuchi, “Curved prism array for controlling directivity of LED backlight,” Proc. IDW 03, 665-668(2003).
[15] A. Funamoto, and S. Aoyama, “LED backlight system with double-prism pattern,” Journal of the Society for Information Display 14(11), 1045(2006).
[16] J. Ha, J. Paek, T. Jang, J. Choi, and Y. Jung, “A new cost-effective optical plate for high performance LCD-TVs,” SID Symposium Digest of Technical Papers 38(1), 46–49(2007).
[17] L. Mingyan, W. Daming, Z. Yajun, and Z. Jian, “Optimization and design of LCD diffuser plate with micro-semisphere structure,” Procedia Engineering 16, 306–311(2011).
[18] R. S. Chang, J. Z Tsai, T. Y. Li, and H. S Liao, “LED Backlight Module by Lightguide-Diffusive Component,” Journal of Display Technology 8(2), 79-86(2012).
[19] Z.-J. Lin et al., “27.2: Ultra‐thin mini‐LED backlight using a light coupling structure,” SID Symposium Digest of Technical Papers 53(S1), 313(2022).
[20] E. Onac, S. Bierhuizen, and G. Eng, “Optical design for an ultra-thin, LED based, 2D dimmable backlight,” in Proceedings of the 16th International Display Workshops 1853(2009).
[21] T. Masuda, Y. Ajichi, T. Kubo, T. Yamamoto, T. Shinomiya, M. Nakamura, T. Shimizu, N. Kasai, H. Mouri, X.-f. Feng, and M. Teragawa, “Ultra thin LED backlight system using tandem light guides for large-size LCD-TV,” The Journal of the Institute of Image Information and Television Engineers 64(10), 1482-1488(2010).
[22] A. Konno, Y. Yamamoto, and T. Inuzuka, “RGB color control system for LED backlights in IPS-LCD TVs,” SID Symposium Digest of Technical Papers 36(1), 1380-1383(2005).
[23] T. Shiga, S. Kuwahara, N. Takeo, and S. Mikoshiba, “Adaptive dimming technique with optically isolated lamp groups,” SID Symposium Digest of Technical Papers 36(1), 992–995(2005).
[24] J. Emmel and L. A. Whitehead, “Modified point spread function for efficient high dynamic range LED backlight capable of high uniformity, high contrast, and smooth gradients,” Applied optics 52(34), 8239-8244(2013).
[25] W. Schwedler and F. Nguyen, “LED backlighting for LCD TVs,” SID Symposium Digest of Technical Papers 41(1), 1091-1096 (2010).
[26] A. Konno, M. Abe, Y. Aono, K. Nakamura, M. Tsumura, I. Hiyama, N. Nishijima, and S. Oohashi, “Ultra thin IPS-pro LCD-TVs using simple side-edge backlight with RGB-LED and novel heat radiation structure,” Symposium Digest of Technical Papers 40(1), 716-719 (2009).
[27] Y. Ito, T. Hori, H. Tani, Y. Ueno, T. Kusunoki, H. Nomura, and H. Kondo, “A backlight system with a phosphor sheet providing both wider color gamut and higher efficiency,” Symposium Digest of Technical Papers 44(1), 816-819 (2013).
[28] T. Ishida and R. Yuki, “A novel ultra-thin backlight system without optical sheets using a multi-layered lightguide,” Journal of the Society for Information Display 19(12), 923-930 (2011).
[29] P. C.-P. Chao, C.-Y. Shen, C.-W. Chiu, J.-S. Huang, C.-L. Wang, S. Chi, H.-W. Lin, and S.-Y. Tsai, “Achieving color balance of a large sized BLU directly–lit by LEDs capped with customized optical lenses,” Symposium Digest of Technical Papers 39(1), 870-873 (2008).
[30] J. Zheng and K. Qian, “Designing single LED illumination distribution for direct-type backlight,” Applied optics 52(28), 7022-7027(2013).
[31] Ding, Z.; Liu, Y.; Ma, Y.; Zheng, Z.; Wang, M.; Zeng, P.; She, J.; Wu, R, “Direct Design of Thin and High-Quality Direct-Lit LED Backlight Systems,” IEEE Photonics Journal 13(2), 1-10(2021).
[32] C. Leiner, W. Nemitz, S. Schweitzer, F. Wenzl, L. Kuna, F. Reil, P. Hartmann, and C. Sommer, “Thin direct-lit application for general lighting realized by freeform micro-optical elements,” Proc. SPIE. 9955, (2016).
[33] I. Moreno, M. Avendano-Alejo, and R. I. Tzonchev, “Designing LED arrays for uniform near-field irradiance,” Applied optics 45(10), 2265–2272(2006).
[34] Y. Ding, X. Liu, Z. Zheng, and P. Gu, “Freeform LED lens for uniform illumination,” Optics express 16(17), 12958–12966(2008).
[35] A. J. W. Whang, Y. Y. Chen, and Y. T. Teng, “Designing uniform illumination systems by surface-tailored lens and configurations of LED arrays,” Journal of display technology 5(3), 94–103(2009).
[36] Z. Qin, K. Wang, F. Chen, X. Luo, and S. Liu, “Analysis of condition for uniform lighting generated by array of light emitting diodes with large view angle,” Optics express 18(16), 17460–17476(2010).
[37] E. Hecht, Optics, 4th ed. (Addison Wesley, San Francisco, 2002).
[38] V. N. Mahajan, Optical Imaging and Aberrations: Part I Ray Geometrical Optics (SPIE PRESS, Washington, 1998).
[39] A. M. Colman, A Dictionary of Psychology (Oxford University Press, 2009).
[40] CIE 1988 2 spectral luminous efficiency functions of photopic vision, CIE Publication No. 86 (1988b).
[41] CIE 15: Colorimetry, 4th ed. (2018).
[42] 大田登，色彩工程學：理論與應用，全華圖書股份有限公司，中華民國九十七年。
[43] A. M. Colman, A Dictionary of Psychology (Oxford University Press, 2009).
[44] J. M. Palmer, and B. G. Grant, The Art of Radiometry (SPIE, 2009).
[45] 孫慶成，光電工程概論(全華圖書股份有限公司，新北市，2012)。
[46] C. C. Sun, T. X. Lee, S. H. Ma, Y. L. Lee, and S. M. Huang, “Precise optical modeling for LED lighting verified by cross correlation in the midfield region,” Optics letters 31(14), 2193-2195(2006).
[47] W. T. Chien, C. C. Sun, and I. Moreno, “Precise optical model of multi-chip white LEDs,” Optics express 15(12), 7572–7577(2007).
[48] C. C. Sun, W. T. Chien, I. Moreno, C. C. Hsieh, and Y. C. Lo, “Analysis of the far-field region of LEDs,” Optics express 17(16), 13918-13927(2009).
[49] 林欣蓉，雙晶白光 LED 用於德規車前燈之光學設計，國立中央大學光電所碩士論文，中華民國一百零九年。
[50] BASLER, “acA5472-17um - Basler ace,’’ https://www.baslerweb.com/en/

指導教授

孫慶成(Ching-Cherng Sun)

審核日期

2023-8-15

推文