A study on the electrical and thermal dissipation properties of carbon nanotube/graphene composite papers

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：38

、訪客IP：3.144.244.117

姓名

李庭瑀(Ting-Yu Lee) 查詢紙本館藏

畢業系所

化學工程與材料工程學系

論文名稱

(A study on the electrical and thermal dissipation properties of carbon nanotube/graphene composite papers)

相關論文

★ High Specific Area g-C3N4 Produced by Ball Milling for On Board Hydrogen Storage	★ A Study on the Relationship Between the Manufacturing Methods of Graphitic-Carbon Nitride (g-C3N4) and their Hydrogen Storage Performance
★ Research on High Entropy Alloys for Hydrogen Storage and TiZr-based Alloys with Different Microstructures	★ A Study on the Hydrogen Storage of AB3-type La–Ca–Mg–Ni-based Hydrogen Storage Alloys and Composites
★ Study on the Cost-Effective High-Entropy Alloys for Efficient Hydrogen Storage	★ Research on the hydrogen storage performance of g-C3N4 nanotubes after microwave irradiation
★ 應用於陰離子交換膜水電解器之三元非貴金屬觸媒開發

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

隨著電子晶片設備的功能越來越強大，其消耗的功率不斷上升，導致熱通量增加。散熱已成為電子設備中解決冷卻要求的重要研究領域。傳統由矽脂組成的散熱材料已經無法達到高功率運算晶片所需的散熱效率。相較之下，奈米碳管(CNT) 和石墨烯(GnP)奈米碳材料具有固有的極高電導率（≧104 S/cm）和熱導率（≈3500 W/mK）。它們的高電導率與高比表面積的特性，可以應用在超級電容器和燃料電池的電極。此外，隨著微電子的小型化和便攜式設備的進步，對高能量密度電池的需求迅速增加，它們的輕質化特性使其具有吸引力。
巴基紙是一種碳基薄膜，主要由奈米碳管之間的分子間凡得瓦力所形成的薄膜。同樣，石墨烯紙是由石墨烯利用凡德瓦力所組成的薄膜，具有高表面積、強化學穩定性和令人印象深刻的導熱性。
本研究旨在使用抽氣過濾技術製造 CNT/GnP 複合紙，並跟打印巴克紙做比較，它們既不需有附著物；本身也具有可饒性，可以適應各種不同的環境。值得注意的是，在製造過程中不添加任何黏合劑。通常，黏合劑可以增強奈米碳管的黏合，並增加柔韌性。然而，由於大多數黏合劑是絕緣材料，它們在兩種物質之間形成屏障並阻礙熱量流動，從而與現有的散熱墊相比具有優異的導熱性。這些創新的無黏合劑複合材料具有卓越的導熱性能，能夠有效、靈活地填充界面。同樣地，CNT和石墨烯的電導率可以在很大程度上保留，只要能夠將接觸電阻降到最低。因此，在本研究中，對抽氣過濾生成的CNT/GnP薄膜的電導率進行了實驗評估。結果表明，經過輾壓後的導電度相比於未輾壓的導電度有所提高。其中，導電度表現最好的石墨烯片測出來的導電度為149.81 S/cm。除了測量導電度，也觀察了導熱值，在室溫下，測量不同比例的打印奈米碳管/石墨烯複合薄膜，當CNT:GnP=67:33時擁有最高的導熱數值為116.73 W/mK。這些數值與鎳箔的數值相似，比商用導熱墊高四倍。也實際上機測試，並在CPU運算量滿載的狀況下測量溫度，相比沒加巴克紙的CPU溫度，溫度從62度降到了49度，下降了13度。因此，這項研究表明，這些創新的碳質複合材料具有卓越的導熱性能，使其成為有效散熱管理的突破性選擇。

摘要(英)

As electronic chip equipment becomes more and more powerful, the power it consumes continues to rise, leading to an increase in the amount of heat energy dissipation. Heat dissipation has emerged as a significant area of research in electronic equipment to address the cooling requirements. Conventional heat dissipation materials composed of silicon can no longer achieve the desired heat dissipation efficiency for high-power computing chips. By contrast, nanocarbon materials, such as carbon nanotubes (CNTs) and graphene platelets (GnPs), inherently possess exceptionally high electrical conductivity (≧ 104 S/cm) and thermal conductivity (≈ 3500 W/mK). Their high electrical conductivity, combined with large surface-to-volume ratio, provides an application for an assembly of the nanomaterials as electrodes in supercapacitors and fuel cells. In addition, following the miniaturization of microelectronics and advances in portable devices, their lightweight property makes them appealing with the rapid increase in demand for compact and high energy density batteries.
Buckypapers are a form of carbon-based thin film, known for their unique integration of single-wall or multi-wall carbon nanotubes through the intermolecular Van der Waals force. This process results in a paper-like structure. Similarly, graphene papers are another type of carbonaceous material that possess a high surface area, strong chemical stability, and impressive thermal conductivity. Given the exceptional thermal conductivity of these carbonaceous materials, we anticipate that papers produced from carbon nanotubes and graphene will have superior heat dissipation capabilities.
The objective of this work is to use filtering technology for the production of CNT/GnP composite paper, and to conduct a comparative analysis with printed buckypaper. Attachments are not necessary for them; nevertheless, they possess flexibility and the ability to adapt to many situations. It is important to note that no adhesives are used in the production process. Adhesives often improve the adherence of carbon nanotubes and enhance their flexibility. Nevertheless, due to the insulating nature of most adhesives, they create a barrier between the two substances, hindering the transfer of heat and hence exhibiting better thermal conductivity in comparison to current thermal pads. These novel binder-free composites provide exceptional heat conductivity and provide quick and adaptable interface filling. Similarly, the electrical conductivity of the CNTs and graphene, can be largely preserved, providing that the contact resistance can be minimized. Thus, in this study, the electrical conductivity of the CNT/GnP films, generated by filtration, has been evaluated by four-probe point testing. It has been shown that the electrical conductivity of the fabricated CNT/GnP films improved after rolling as compared to its as-fabricated state. Out of all the samples, the graphene sheet with the highest conductivity had a measured value of 149.81 S/cm. Furthermore, the observation of the thermal conductivity value was conducted in addition to the measurement of electrical conductivity. The measurements of printed carbon nanotube/graphene composite sheets with varying fractions were measured at room temperature using the Hot Disk transient plane heat source technique.
At a ratio of 67:33 between CNT and graphene, the thermal conductivity reached a peak value of 116.73 W/mK. These values are comparable to those of nickel foil and three times greater than those of commercial thermal pads. Furthermore, the experiment was conducted on the surface of the CPU of a computer, and the temperature was recorded under maximum CPU usage. The temperature decreased from 62℃ to 49℃ than compared to the CPU temperature without buckypaper. This work displays the exceptional electrical and thermal conductivity qualities of these novel carbonaceous composites, establishing them as a groundbreaking choice for both electrical applications and thermal management.

關鍵字(中)

★ 巴克紙
★ 奈米碳管
★ 石墨烯

關鍵字(英)

★ buckypaper
★ carbon nanotube
★ graphene

論文目次

中文摘要 i
ABSTRACT vii
ACKNOWLEDGMENTS ix
TABLE OF CONTENTS x
LIST OF FIGURES xiii
LIST OF TABLES xvi
Chapter 1 Introduction 1
1.1 Background 1
1.2 Motivation for research 2
1.3 Thesis Structure 3
Chapter 2 Literature Review 5
2.1 Properties of carbon nanotubes and graphene 5
2.1.1 Carbon nanotubes 5
2.1.2 Graphene 9
2.2 Properties of buckypapers and graphene papers 12
2.2.1 Buckypapers 12
2.2.2 Graphene papers 14
2.3 Fabrication methods of buckypapers and graphene papers 16
2.3.1 Frit compression 16
2.3.2 Domino Pushing 17
2.3.3 Vacuum Filtration 19
2.3.4 Inkjet Printing 21
2.3.5 Electrophoretic Deposition 22
2.3.6 Post-Electrophoretic Deposition 23
2.4 Electrical conductivity of buckypapers 25
2.5 Thermal Interface Materials (TIMs) 27
2.5.1 The background of TIM materials 28
2.5.2 Types of thermal interface material 29
2.5.3 Application of carbonaceous materials in thermal interface materials 31
2.6 Thermal conductivity measuring techniques 36
2.6.1 Transient Plane Source (TPS) 37
2.6.2 Laser Flash 38
2.6.3 Heat flow meter 39
Chapter 3 Experimental Method 42
3.1 Experimental Materials 42
3.2 Experimental Procedures 42
3.2.1 Fabrication of buckypapers 42
3.2.2 Fabrication of CNT/Graphene films 43
3.3 Instrumental Analysis 44
3.3.1 Field Emission Scanning Electron Microscopy 44
(FE-SEM) 44
3.3.2 Raman spectroscopy 45
3.3.3 Laser Scanning Confocal Microscope 45
3.3.4 Surface Area and Pore Analyzer 46
3.3.5 Four-point probe 47
3.3.6 Hot Disk 47
Chapter 4 Results and Discussions 49
4.1 Appearance of buckypapers and CNT/Graphene films 49
4.2 Microscopic surface observation of CNT/Graphene thin films 52
4.3 Electrical properties of different buckypapers 59
4.4 Buckypaper produced by printing 65
4.5 CNT/GnP composites comparison with other groups 72
Chapter 5 Conclusions 74
References 76

參考文獻

[1] Z. Han and A. Fina, "Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review," Progress in polymer science, vol. 36, no. 7, pp. 914-944, 2011.
[2] N. K. Mahanta and A. R. Abramson, "Thermal conductivity of graphene and graphene oxide nanoplatelets," in 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, 30 May-1 June 2012 2012, pp. 1-6, doi: 10.1109/ITHERM.2012.6231405.
[3] S. Iijima, "Helical microtubules of graphitic carbon," nature, vol. 354, no. 6348, pp. 56-58, 1991.
[4] K. Hata, D. N. Futaba, K. Mizuno, T. Namai, M. Yumura, and S. Iijima, "Water-assisted highly efficient synthesis of impurity-free single-walled carbon nanotubes," Science, vol. 306, no. 5700, pp. 1362-1364, 2004.
[5] M. Choudhary, A. Sharma, S. Aravind Raj, M. T. H. Sultan, D. Hui, and A. U. M. Shah, "Contemporary review on carbon nanotube (CNT) composites and their impact on multifarious applications," Nanotechnology Reviews, vol. 11, no. 1, pp. 2632-2660, 2022.
[6] A. M. Cassell, J. A. Raymakers, J. Kong, and H. Dai, "Large scale CVD synthesis of single-walled carbon nanotubes," The Journal of Physical Chemistry B, vol. 103, no. 31, pp. 6484-6492, 1999.
[7] A. Peigney, P. Coquay, E. Flahaut, R. E. Vandenberghe, E. De Grave, and C. Laurent, "A study of the formation of single-and double-walled carbon nanotubes by a CVD method," The Journal of Physical Chemistry B, vol. 105, no. 40, pp. 9699-9710, 2001.
[8] C. P. Deck and K. Vecchio, "Growth mechanism of vapor phase CVD-grown multi-walled carbon nanotubes," Carbon, vol. 43, no. 12, pp. 2608-2617, 2005.
[9] Y. Ando and X. Zhao, "Synthesis of carbon nanotubes by arc-discharge method," New diamond and frontier carbon technology, vol. 16, no. 3, pp. 123-138, 2006.
[10] D. Borisenko, N. Kolesnikov, M. Kulakov, and V. Kveder, "Growth of carbon nanotubes (CNTs) in electric-arc discharge in argon," International Journal of Nanoscience, vol. 1, no. 03n04, pp. 235-246, 2002.
[11] X. Zhao, M. Ohkohchi, S. Inoue, T. Suzuki, T. Kadoya, and Y. Ando, "Large-scale purification of single-wall carbon nanotubes prepared by electric arc discharge," Diamond and Related Materials, vol. 15, no. 4-8, pp. 1098-1102, 2006.
[12] C. D. Scott, S. Arepalli, P. Nikolaev, and R. E. Smalley, "Growth mechanisms for single-wall carbon nanotubes in a laser-ablation process," Applied Physics A, vol. 72, pp. 573-580, 2001.
[13] S. Arepalli, "Laser ablation process for single-walled carbon nanotube production," Journal of nanoscience and nanotechnology, vol. 4, no. 4, pp. 317-325, 2004.
[14] Y. Zhang, H. Gu, and S. Iijima, "Single-wall carbon nanotubes synthesized by laser ablation in a nitrogen atmosphere," Applied physics letters, vol. 73, no. 26, pp. 3827-3829, 1998.
[15] E. Lamouroux, P. Serp, and P. Kalck, "Catalytic routes towards single wall carbon nanotubes," Catalysis reviews, vol. 49, no. 3, pp. 341-405, 2007.
[16] H. T. Ng, B. Chen, J. E. Koehne, A. M. Cassell, J. Li, J. Han, and M. Meyyappan, "Growth of carbon nanotubes: a combinatorial method to study the effects of catalysts and underlayers," The Journal of Physical Chemistry B, vol. 107, no. 33, pp. 8484-8489, 2003.
[17] S. Takenaka, Y. Orita, H. Matsune, E. Tanabe, and M. Kishida, "Structures of silica-supported Co catalysts prepared using microemulsion and their catalytic performance for the formation of carbon nanotubes through the decomposition of methane and ethylene," The Journal of Physical Chemistry C, vol. 111, no. 21, pp. 7748-7756, 2007.
[18] C. T. Wirth, B. C. Bayer, A. D. Gamalski, S. Esconjauregui, R. S. Weatherup, C. Ducati, C. Baehtz, J. Robertson, and S. Hofmann, "The phase of iron catalyst nanoparticles during carbon nanotube growth," Chemistry of Materials, vol. 24, no. 24, pp. 4633-4640, 2012.
[19] W. Wang, W. Chu, N. Wang, W. Yang, and C. Jiang, "Mesoporous nickel catalyst supported on multi-walled carbon nanotubes for carbon dioxide methanation," international journal of hydrogen energy, vol. 41, no. 2, pp. 967-975, 2016.
[20] A. Tavasoli, K. Sadagiani, F. Khorashe, A. Seifkordi, A. Rohani, and A. Nakhaeipour, "Cobalt supported on carbon nanotubes—A promising novel Fischer–Tropsch synthesis catalyst," Fuel Processing Technology, vol. 89, no. 5, pp. 491-498, 2008.
[21] C. Kramberger, R. Pfeiffer, H. Kuzmany, V. Zólyomi, and J. Kürti, "Assignment of chiral vectors in carbon nanotubes," Physical Review B, vol. 68, no. 23, p. 235404, 2003.
[22] L.-C. Qin, "Determination of the chiral indices (n, m) of carbon nanotubes by electron diffraction," Physical Chemistry Chemical Physics, vol. 9, no. 1, pp. 31-48, 2007.
[23] F. Zhang, P.-X. Hou, C. Liu, and H.-M. Cheng, "Epitaxial growth of single-wall carbon nanotubes," Carbon, vol. 102, pp. 181-197, 2016.

[24] A. Roy, C. Sreejith, S. Abhishek, G. Ragul, and I. Ghosh, "Effect of Multi-Walled Carbon Nanotubes on Automotive and Aerospace Applications—Case Study," Int. J. Emerg. Trends Sci. Technol, vol. 5, pp. 5102-5113, 2017.
[25] M. Regi, "Synthesis, characterization and application of carbon nanotubes: the case of aerospace engineering," in Nanofibers and Nanotechnology in Textiles: Elsevier, 2007, pp. 113-193.
[26] R. Amin, P. R. Kumar, and I. Belharouak, "Carbon nanotubes: Applications to energy storage devices," Carbon Nanotubes-Redefining the World of Electronics, vol. 10, pp. 5772-94155, 2021.
[27] M. N. Norizan, M. H. Moklis, S. Z. N. Demon, N. A. Halim, A. Samsuri, I. S. Mohamad, V. F. Knight, and N. Abdullah, "Carbon nanotubes: Functionalisation and their application in chemical sensors," RSC advances, vol. 10, no. 71, pp. 43704-43732, 2020.
[28] A. D. Franklin, M. C. Hersam, and H.-S. P. Wong, "Carbon nanotube transistors: Making electronics from molecules," Science, vol. 378, no. 6621, pp. 726-732, 2022.
[29] Z. Li, H. R. Kandel, E. Dervishi, V. Saini, Y. Xu, A. R. Biris, D. Lupu, G. J. Salamo, and A. S. Biris, "Comparative study on different carbon nanotube materials in terms of transparent conductive coatings," Langmuir, vol. 24, no. 6, pp. 2655-2662, 2008.
[30] C. Nanotubes, "Advanced Topics in the Synthesis, Structure, Properties and Applications," Topics in applied physics, vol. 111, p. 353À369, 2008.
[31] R. Powell, C. Y. Ho, and P. E. Liley, Thermal conductivity of selected materials. US Department of Commerce, National Bureau of Standards Washington, DC, 1966.
[32] J. R. Davis, Copper and copper alloys. ASM international, 2001.
[33] L. Duclaux, "Review of the doping of carbon nanotubes (multiwalled and single-walled)," Carbon, vol. 40, no. 10, pp. 1751-1764, 2002.
[34] W. Zhou, S. Sasaki, and A. Kawasaki, "Effective control of nanodefects in multiwalled carbon nanotubes by acid treatment," Carbon, vol. 78, pp. 121-129, 2014.
[35] Y. Zhu, S. Murali, W. Cai, X. Li, J. W. Suk, J. R. Potts, and R. S. Ruoff, "Graphene and Graphene Oxide: Synthesis, Properties, and Applications," Advanced Materials, vol. 22, no. 35, pp. 3906-3924, 2010, doi: https://doi.org/10.1002/adma.201001068.
[36] K. S. Novoselov, A. K. Geim, S. V. Morozov, D.-e. Jiang, Y. Zhang, S. V. Dubonos, I. V. Grigorieva, and A. A. Firsov, "Electric field effect in atomically thin carbon films," science, vol. 306, no. 5696, pp. 666-669, 2004.
[37] A. Dubey, S. Dave, M. Lakhani, and A. Sharma, "Applications of graphene for communication, electronics and medical fields: A review," in 2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), 2016: IEEE, pp. 2435-2439.
[38] Y. Huang, J. Liang, and Y. Chen, "An overview of the applications of graphene‐based materials in supercapacitors," small, vol. 8, no. 12, pp. 1805-1834, 2012.
[39] H. Huang, H. Shi, P. Das, J. Qin, Y. Li, X. Wang, F. Su, P. Wen, S. Li, and P. Lu, "The chemistry and promising applications of graphene and porous graphene materials," Advanced Functional Materials, vol. 30, no. 41, p. 1909035, 2020.
[40] F. Zhang, K. Yang, G. Liu, Y. Chen, M. Wang, S. Li, and R. Li, "Recent advances on graphene: Synthesis, properties and applications," Composites Part A: Applied Science and Manufacturing, vol. 160, p. 107051, 2022.
[41] Q. Xia, Z. Zhang, Y. Liu, and J. Leng, "Buckypaper and its composites for aeronautic applications," Composites Part B: Engineering, vol. 199, p. 108231, 2020.
[42] S. Roseline, "Manufacturing of Buckypaper Composites for Energy Storage Applications: A Review," Materials for Sustainable Energy Storage at the Nanoscale, pp. 67-76, 2023.
[43] P. Tsai, T. Chiu, P. Tsai, K. Lin, K. Lin, and S. Chan, "Carbon nanotube buckypaper/MmNi5 composite film as anode for Ni/MH batteries," international journal of hydrogen energy, vol. 37, no. 4, pp. 3491-3499, 2012.
[44] Y. Hu, X. Li, J. Wang, R. Li, and X. Sun, "Free-standing graphene–carbon nanotube hybrid papers used as current collector and binder free anodes for lithium ion batteries," Journal of power sources, vol. 237, pp. 41-46, 2013.
[45] X. Ye, Q. Zhou, C. Jia, Z. Tang, Y. Zhu, and Z. Wan, "Producing large-area, foldable graphene paper from graphite oxide suspensions by in-situ chemical reduction process," Carbon, vol. 114, pp. 424-434, 2017.
[46] R. L. D. Whitby, T. Fukuda, T. Maekawa, S. L. James, and S. V. Mikhalovsky, "Geometric control and tuneable pore size distribution of buckypaper and buckydiscs," (in English), Carbon, Article vol. 46, no. 6, pp. 949-956, May 2008, doi: 10.1016/j.carbon.2008.02.028.
[47] D. Wang, P. Song, C. Liu, W. Wu, and S. Fan, "Highly oriented carbon nanotube papers made of aligned carbon nanotubes," Nanotechnology, vol. 19, no. 7, p. 075609, 2008.
[48] C.-S. Yeh, "Characterization of nanotube buckypaper manufacturing process," 2004.
[49] L. Hussein, G. Urban, and M. Krüger, "Fabrication and characterization of buckypaper-based nanostructured electrodes as a novel material for biofuel cell applications," Physical Chemistry Chemical Physics, vol. 13, no. 13, pp. 5831-5839, 2011.
[50] T. Wei, J. Ruan, Z. Fan, G. Luo, and F. Wei, "Preparation of a carbon nanotube film by ink-jet printing," Carbon, vol. 45, no. 13, pp. 2712-2716, 2007.
[51] J. L. Rigueur, S. A. Hasan, S. V. Mahajan, and J. H. Dickerson, "Buckypaper fabrication by liberation of electrophoretically deposited carbon nanotubes," Carbon, vol. 48, no. 14, pp. 4090-4099, 2010.
[52] J. Biswas, J. S. Rottman-Yang, I. Gonzalo-Juan, and J. H. Dickerson, "Freestanding carbon nanotube films fabricated by post-electrophoretic deposition electrochemical separation," Journal of The Electrochemical Society, vol. 159, no. 4, p. K103, 2012.
[53] J. S. Rottman-Yang, J. Biswas, O. O. Abe, K. L. Campbell, I. Gonzalo-Juan, V. H. Pham, T. Gebre, and J. H. Dickerson, "Post-electrophoretic deposition electrochemical separation (PEPDECS): optimization of the fabrication of freestanding carbon nanotube films," ECS Journal of Solid State Science and Technology, vol. 3, no. 11, p. M71, 2014.
[54] R. P. Tortorich and J.-W. Choi, "Inkjet Printing of Carbon Nanotubes," Nanomaterials, vol. 3, no. 3, pp. 453-468, 2013. [Online]. Available: https://www.mdpi.com/2079-4991/3/3/453.
[55] I.-W. P. Chen, R. Liang, H. Zhao, B. Wang, and C. Zhang, "Highly conductive carbon nanotube buckypapers with improved doping stability via conjugational cross-linking," Nanotechnology, vol. 22, no. 48, p. 485708, 2011.
[56] W. Yu, H. Xie, L. Yin, J. Zhao, L. Xia, and L. Chen, "Exceptionally high thermal conductivity of thermal grease: Synergistic effects of graphene and alumina," International Journal of Thermal Sciences, vol. 91, pp. 76-82, 2015.
[57] S. Wu, T. Yan, Z. Kuai, and W. Pan, "Thermal conductivity enhancement on phase change materials for thermal energy storage: A review," Energy Storage Materials, vol. 25, pp. 251-295, 2020.
[58] Y.-K. Kwon and P. Kim, "Unusually high thermal conductivity in carbon nanotubes," High Thermal Conductivity Materials, pp. 227-265, 2006.
[59] T. Ji, Y. Feng, M. Qin, and W. Feng, "Thermal conducting properties of aligned carbon nanotubes and their polymer composites," Composites Part A: Applied Science and Manufacturing, vol. 91, pp. 351-369, 2016/12/01/ 2016, doi: https://doi.org/10.1016/j.compositesa.2016.10.009.
[60] B. A. Cola, X. Xu, and T. S. Fisher, "Increased real contact in thermal interfaces: A carbon nanotube/foil material," Applied physics letters, vol. 90, no. 9, 2007.
[61] J. R. Wasniewski, D. H. Altman, S. L. Hodson, T. S. Fisher, A. Bulusu, S. Graham, and B. A. Cola, "Characterization of metallically bonded carbon nanotube-based thermal interface materials using a high accuracy 1D steady-state technique," 2012.
[62] W. Cai, A. L. Moore, Y. Zhu, X. Li, S. Chen, L. Shi, and R. S. Ruoff, "Thermal transport in suspended and supported monolayer graphene grown by chemical vapor deposition," Nano letters, vol. 10, no. 5, pp. 1645-1651, 2010.
[63] A. A. Balandin, S. Ghosh, W. Bao, I. Calizo, D. Teweldebrhan, F. Miao, and C. N. Lau, "Superior thermal conductivity of single-layer graphene," Nano letters, vol. 8, no. 3, pp. 902-907, 2008.
[64] A. Yu, P. Ramesh, M. E. Itkis, E. Bekyarova, and R. C. Haddon, "Graphite nanoplatelet− epoxy composite thermal interface materials," The Journal of Physical Chemistry C, vol. 111, no. 21, pp. 7565-7569, 2007.
[65] D. Singh, J. Y. Murthy, and T. S. Fisher, "Mechanism of thermal conductivity reduction in few-layer graphene," Journal of Applied Physics, vol. 110, no. 4, 2011.
[66] P. Zhu, P. Wang, P. Shao, X. Lin, Z. Xiu, Q. Zhang, E. Kobayashi, and G. Wu, "Research progress in interface modification and thermal conduction behavior of diamond/metal composites," International Journal of Minerals, Metallurgy and Materials, vol. 29, pp. 200-211, 2022.
[67] A. Palacios, L. Cong, M. Navarro, Y. Ding, and C. Barreneche, "Thermal conductivity measurement techniques for characterizing thermal energy storage materials–A review," Renewable and Sustainable Energy Reviews, vol. 108, pp. 32-52, 2019.
[68] S. A. Al-Ajlan, "Measurements of thermal properties of insulation materials by using transient plane source technique," Applied thermal engineering, vol. 26, no. 17-18, pp. 2184-2191, 2006.
[69] V. Khuu, M. Osterman, A. Bar-Cohen, and M. Pecht, "Thermal performance measurements of thermal interface materials using the laser flash method," in International Electronic Packaging Technical Conference and Exhibition, 2007, vol. 42770, pp. 405-414.
[70] S. Breuer and F. R. Schilling, "Improving thermal diffusivity measurements by including detector inherent delayed response in laser flash method," International Journal of Thermophysics, vol. 40, pp. 1-17, 2019.
[71] R. P. Tye, K. G. Coumou, A. O. Desjarlais, and D. M. Haines, "Historical Development of large heat flow meter apparatus for measurements of thermal resistance of insulations," in Thermal Insulation: Materials and Systems: ASTM International, 1987.
[72] I. Yang, D. Kim, S. Lee, and H. Jang, "Construction and calibration of a large-area heat flow meter apparatus," Energy and Buildings, vol. 203, p. 109445, 2019.
[73] D. G. Cahill, "Thermal conductivity measurement from 30 to 750 K: the 3ω method," Review of scientific instruments, vol. 61, no. 2, pp. 802-808, 1990.
[74] D. Zhao, X. Qian, X. Gu, S. A. Jajja, and R. Yang, "Measurement techniques for thermal conductivity and interfacial thermal conductance of bulk and thin film materials," Journal of Electronic Packaging, vol. 138, no. 4, p. 040802, 2016.
[75] H. Wang, Y. Wang, X. Cao, M. Feng, and G. Lan, "Vibrational properties of graphene and graphene layers," Journal of Raman Spectroscopy: An International Journal for Original Work in all Aspects of Raman Spectroscopy, Including Higher Order Processes, and also Brillouin and Rayleigh Scattering, vol. 40, no. 12, pp. 1791-1796, 2009.
[76] Y. Agari, A. Ueda, and S. Nagai, "Thermal conductivity of a polyethylene filled with disoriented short‐cut carbon fibers," Journal of Applied Polymer Science, vol. 43, no. 6, pp. 1117-1124, 1991.
[77] D.-K. Lee, J. Yoo, H. Kim, B.-H. Kang, and S.-H. Park, "Electrical and thermal properties of carbon nanotube polymer composites with various aspect ratios," Materials, vol. 15, no. 4, p. 1356, 2022.
[78] B. Mu, X. Li, X. Feng, Y. Li, C. Ding, G. Zhao, and J. Yang, "Relation of the Electrical Conductivity and the Thermal Conductivity to the Young’s Modulus of Buckypapers," International Journal of Thermophysics, vol. 42, pp. 1-11, 2021.
[79] V. Kumar, S. Sharma, A. Pathak, B. P. Singh, S. R. Dhakate, T. Yokozeki, T. Okada, and T. Ogasawara, "Interleaved MWCNT buckypaper between CFRP laminates to improve through-thickness electrical conductivity and reducing lightning strike damage," Composite Structures, vol. 210, pp. 581-589, 2019.
[80] M. F. Arif, S. Kumar, and T. Shah, "Tunable morphology and its influence on electrical, thermal and mechanical properties of carbon nanostructure-buckypaper," Materials & Design, vol. 101, pp. 236-244, 2016.
[81] A. Oluwalowo, N. Nguyen, S. Zhang, J. G. Park, and R. Liang, "Electrical and thermal conductivity improvement of carbon nanotube and silver composites," Carbon, vol. 146, pp. 224-231, 2019.

指導教授

陳立業(Sammy Lap Ip, Chan)

審核日期

2024-8-6

推文