介金屬層與熱處理對多孔 A356 鋁合金壓縮性質 的影響

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：81

、訪客IP：18.221.223.175

姓名

林宏桀(Hong-Chieh Lin) 查詢紙本館藏

畢業系所

材料科學與工程研究所

論文名稱

介金屬層與熱處理對多孔 A356 鋁合金壓縮性質的影響
(Effect of interface reaction in A356 matrix and heat treatment on the compressive property of A356 alloys foam)

相關論文

★ 元素揮發對Mg-Ni-Li合金儲放氫特性之影響	★ 以超臨界流體製備金屬觸媒/奈米碳管複合材料並探討其添加對氫化鋁鋰放氫特性的影響
★ LaNi5對Mg2Ni合金電極性質之影響	★ 固溶處理之冷卻速率對SP-700鈦合金微結構與機械性質之影響
★ Pb含量與熱處理對AgPb18+xSbTe20合金熱電性質影響之探討	★ 鈧對Al-7Si-0.6Mg合金機械性質影響
★ 以超臨界流體製備石墨烯/金屬複合觸媒並探討其添加對氫化鋁鋰放氫特性的影響	★ 高壓氫壓縮機用之儲氫合金開發
★ 固溶處裡對SP-700鈦合金微結構及機械性質之影響	★ 微量鋯與安定化退火對Al-4.7Mg-0.75Mn 合金腐蝕與機械性質之影響
★ 微量Ni對Al-4.5Cu-0.3Mg-0.15Ti合金熱穩定性之影響	★ 微量Zr與冷加工對Al-4.7Zn-1.6Mg合金淬火敏感性之影響
★ 微量Zr和Sc與均質化對Al-4.5Zn-1.5Mg合金機械性質與再結晶之影響	★ 高含量Ti、B對A201-T7鋁合金熱裂性、微結構與機械性質的影響
★ 改良劑(鍶、銻)與熱處理對Al-11Si-3Cu-0.5Mg合金微結構及磨耗性質之影響	★ 以濕蝕刻法於可撓性聚亞醯胺基板製作微通孔之研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

以金屬空心球法製備之多孔鋁，內部孔隙為封閉式結構，具有密度低、
比強度高、抗壓縮性能好之優點。對於多孔材料而言，基地以及空間支架的
選擇對於其壓縮性質非常重要，且兩者相輔相成。本實驗將 Φ2mm316L、
Φ4mm316L、Φ2mm4605、Φ4mm4605 空心鐵球作為空間支架、A356 作為
基地，以重力鑄造法進行澆鑄，製備多孔鋁合金。透過熱處理以及對鐵球進
行改質，藉由微結構分析與壓縮試驗，探討其對壓縮性質的影響。結果顯示，經由 T6 熱處理，改變多孔 A356 合金基地中共晶 Si 之形狀，以及強化相之析出，提高了鋁合金的強度，進而提升壓縮性質。透過對於空心鐵球進行改質，使鐵球表面無法與鋁基地之元素進行反應，降低了鋁基地中富鐵相含量以及介金屬層的形成，改善了 Φ2mm316L 和 Φ2mm4605 之多孔鋁於壓縮過程時的破裂行為。

摘要(英)

The aluminum foam is prepared using the metal hollow sphere method features a closed-cell structure, offered advantages such as low density, high specific strength, and excellent compressive performance. For porous materials, the selection of both the matrix and the space holder is crucial for their compressive properties, and the two components complement each other. In this experiment, Φ2mm 316L, Φ4mm 316L, Φ2mm 4605, and Φ4mm 4605 hollow steel spheres were used as space holder, and A356 was used as the matrix. The aluminum foam was prepared using gravity casting. Through heat treatment and modification of the steel spheres, the effects on compressive properties were investigated using microstructure analysis and compression tests. The results showed that T6 heat treatment changed the shape of eutectic Si in the aluminum foam matrix and enhanced phase precipitation, thereby increasing the strength of the aluminum alloy and improving its compressive properties. By modifying the hollow steel spheres, the surface of the spheres was prevented from reacting with elements in the aluminum matrix, reducing the content of iron-rich phases and the formation of intermetallic layers. This modification improved the fracture behavior of the Φ2mm 316L and Φ2mm 4605 aluminum foam during compression.

關鍵字(中)

★ 多孔鋁
★ A356
★ 能量吸收

關鍵字(英)

★ aluminum foam
★ A356 alloy
★ energy absorption

論文目次

摘要i
Abstract ii
目錄iv
表目錄vii
圖目錄viii
第一章前言與文獻回顧1
1.1 多孔金屬簡介 1
1.2 多孔金屬的製備2
1.2.1 壓力滲透鑄造法2
1.2.2 熔融發泡鑄造法4
1.2.3 傳統粉末冶金法5
1.3 多孔金屬之壓縮性質6
1.4 多孔金屬抗彈之應用9
1.5 A356鋁合金的簡介10
1.5.1 鋁合金分類 10
1.5.2 A356鋁合金簡介11
1.5.3 A356之析出相12
1.5.4 Fe元素對A356鋁合金的影響13
1.5.5 A356鋁合金之熱處理13
1.5.5.1 固溶處理 13
1.5.5.2 淬火14
1.5.5.3 時效處理 14
第二章實驗步驟15
2.1 多孔鋁製作流程16
2.2 密度、孔隙率測量與計算17
2.3 熱處理流程18
2.4 微結構分析18
2.4.1 光學顯微鏡(Optical Microscopy, OM)18
2.4.2 掃描式電子顯微鏡(Scanning Electron Microscopy, SEM)19
2.4.3 X光繞射分析(X-ray diffraction)19
第三章結果與討論19
3.1 多孔鋁之物理性質19
3.2 微結構分析20
3.2.1 光學顯微鏡(OM)20
3.2.1.1 多孔合金之微結構 20
3.2.1.2 空心球之改質22
3.2.1.3 裂紋之傳遞22
3.2.2 掃描式電子顯微鏡(SEM)24
3.2.2.1 富鐵相之成分24
3.2.3 合金X光繞射分析27
3.3 多孔鋁之(壓縮)機械性質28
3.3.1 多孔鋁之壓縮變形行為28
3.3.2 空心球對多孔鋁之機械性質的影響31
3.3.3 改質對多孔鋁之機械性質的影響 32
3.3.4 熱處理對多孔鋁之機械性質的影響33
3.3.5 多孔A356壓縮性質彙整38
第四章結論39
參考文獻 41

參考文獻

[ASM1]John E. Hatch,“Aluminum: Properties and Physical Metallurgy, ASM International, Metals Park”, Ohio, pp.351-359(1984)

[ASM2]John E. Hatch,“Aluminum: Properties and Physical Metallurgy, ASM International, Metals Park”, Ohio, pp.320-350(1984)

[ASM3]J.R . Davis, ASM Specialty Handbook,“Aluminum and Aluminum Alloys”, ASM International Materials Park, pp.718(1994)

[ASTM1]ASTM B26M/B108, Standard Specification For Aluminum-Alloy Sand Castings(2021)

[ASTM2]ASTM-B962,“Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle”, ASTM International(2023)

[ASTM3]ASTM B917/B917M-12, Heat Treatment of Aluminum-Alloy Castings From All Processes(2020)

[BAN]John Banhart,“Manufacture, Characterisation and Application of Cellular Metals and Metal Foams”, Progress in Materials Science, Vol.46, pp.559–632 (2001)

[BEK]Nuray Bekoz, Enver Oktay,“Effects of Carbamide Shape and Content on Processing and Properties of Steel Foams”, Journal of Materials Processing Technology, Vol.212, pp.2109-2112(2012)

[CHEN]Yu Chen, Nannan Wang: Porous ceramics,“Light in Weight but Heavy in Energy and Environment Technologies”, Materials Science & Engineering R Vol.143, 100589(2021)

[DING]Yuming Ding , Liang Chang, Binxu Guo, Jian Ding,“Precipitation behavior and tensile properties of A356.2 alloy with different high temperature precipitation temperatures”,Mater. Res. Express, Vol.9, 026507(2022)

[GUS]G. Gustafsson, T. Thorvaldsson, and G.L. Dunlop,“The Influence of Fe and Cr on the Microstructure of Cast Al-Si-Mg Alloys”, Metallurgical and Materials Transactions A, Vol. 17, pp.45–52(1986).

[JEN]T. M. Jeng, S.C. Tzeng, T. C. Liu,“Heat Transfer Behavior in a Rotating Aluminum Foam Heat Sink with a Circular Impinging Jet”, International Journal of Heat and Mass Transfer, Vol.51, pp.1205-1215(2008)

[KHA] W. Khalifa, F.H. Samuel, and J.E. Gruzleski,“Iron Intermetallic Phases in the Al Corner of the Al-Si-Fe System”, Metallurgical and Materials Transactions A, Vol.34, pp.807–825(2003)

[KHE]Azam Beigie Kheradmand, S. Otroj,“Comparison Between Methods Used for Manufacturing of Aluminum Foam”, Life Science Journal, Vol.10, pp.175-185(2013)

[LIN]Emanoil Linul, Daniel Lell, Nima Movahedi, Cosmin Codrean, Thomas Fiedler,“Compressive Properties of Zinc Syntactic Foams at Elevated temperatures”, Composites Part B: Engineering Vol.167, pp.122-134(2019)

[LEE1] 李勝隆, 金屬熱處理:原理與應用, 全華, pp.9-1 (2018)

[LEE2] 李勝隆, 金屬熱處理:原理與應用, 全華, pp.9-32 (2018)

[LEE3] 李勝隆, 金屬熱處理:原理與應用, 全華, pp.9-55 (2018)

[LEE4] 李勝隆, 金屬熱處理:原理與應用, 全華, pp.9-41 (2018)

[LI]Q. M. Li, I. Magkiriadis, J. J. Harrigan, “Compressive Strain at The Onset of The Densification of Cellular Solids”, Journal of Cellular Plastics, Vol.42, pp.317-392(2006)

[MAH]M. Mahta, M. Emamy, A. Daman, A. Keyvani, J. Campbell,“Precipitation of Fe Rich Intermetallics in Cr and Co Modified A413 alloy”, International Journal of Cast Metals Research, Vol.18(2005)

[MAR]J. Marx, M. Portanova, A. Rabiei, “Ballistic Performance of Composite Metal Foam Against Large Caliber Threats”, Composite Structures, Vol.225, 111032(2019)

[NOR]Norbert O., I., Szlancsik, A., Kemény, A., Kincses, D,“Compressive Mechanical Properties of Low-Cost Aluminium Matrix Syntactic Foams”, Compos. Part A, 105923(2020)

[PAZ]Juan Francisco Hernandez Paz,“Heat Treatment and Precipitation in A356 Aluminum Alloy”, pp.14(2003)

[RAB]Afsaneh Rabiei, Lakshmi J. Vendra,“A Study on Aluminum–Steel Composite Metal Foam Processed by Casting”, Materials Science and Engineering A Vol.465, pp.59-67(2007)

[TUN]Tansel Tuncay, Samet Bayoğlu,“The Effect of Iron Content on Microstructure and Mechanical Properties of A356 Cast Alloy”, Metallurgical and Materials Transactions B, Vol.48, pp.794-807(2017)

[VIG]R. Vaira Vignesh, R. Padmanaban, M. Govindaraju,“Advances in Processing of Lightweight Metal Alloys and Composites”, Materials Horizons, pp.51–74(2022)

指導教授

李勝隆(Sheng-Long Lee)

審核日期

2024-7-17

推文