Mini LED 之直下式背光之設計

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：34

、訪客IP：18.220.1.11

姓名

謝沛樹(Pei-Shu Hsieh) 查詢紙本館藏

畢業系所

光電科學與工程學系

論文名稱

Mini LED 之直下式背光之設計
(Mini LED Direct Backlight Design)

相關論文

★ 奈米電漿子感測技術於生物分子之功能分析	★ 表面結構擴散片之設計、製作與應用
★ 結合柱狀透鏡陣列之非成像車頭燈光型設計	★ CCD 量測儀器之研究與探討
★ 鈦酸鋇晶體非均向性自繞射之研究及其在光資訊處理之應用	★ 多光束繞射光學元件應用在DVD光學讀取頭之設計
★ 高位移敏感度之全像多工光學儲存之研究	★ 利用亂相編碼與體積全像之全光學式光纖感測系統
★ 體積光柵應用於微物3D掃描之研究	★ 具有偏極及光強分佈之孔徑的繞射極限的研究
★ 三維亂相編碼之體積全像及其應用	★ 透鏡像差的量測與MTF的驗證
★ 二位元隨機編碼之全像光學鎖之研究	★ 亂相編碼於體積全像之全光學分佈式光纖感測系統之研究
★ 自發式相位共軛鏡之相位穩定與應用於自由空間光通訊之研究	★ 體積全像空間濾波器應用於物體三度空間微米級位移之量測

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 (2027-6-26以後開放)

摘要(中)

本論文旨在透過二次光學設計開發大角度折射式透鏡，並將其應用於直下式背光模組中，以在限定混光距離內設計出能疊加後達到光型均勻的效果，從而實現降低商業成本的目標。
由於所設計的折射式透鏡會使LED光源產生大角度折射，且LED封裝中的黃色螢光粉與藍色晶片的尺寸有所差異，因此在構建光源模型時，需要分別對黃光和藍光以中場擬合法進行建模和驗證，以解決實驗中遇到的黃暈問題。在黃光模型中，我們使用權重因子來建立光源模型，並進行驗證。通過二次光學設計，我們設計了三款不同的透鏡，並製作樣品進行實驗。
我們修正了第一款透鏡疊加後重疊部分造成的不均勻現象，並在第二款透鏡的實驗中發現黃光和藍光在折射率上的差異會導致模擬與實驗的差距，因此需要以不同的折射率進行模擬。最終，我們設計出了第三款透鏡，成功解決了前述問題。

摘要(英)

This paper aims to develop a wide-angle refractive lens through secondary optical design and apply it to direct-lit backlight modules. The goal is to achieve uniform light distribution within a limited Optical Distance, thereby reducing commercial costs. Due to the significant refractive angles and differences in the sizes of yellow phosphor and blue chip in LED packages, separate modeling for yellow and blue light in mid-field region is required to address the yellow halo issue. A weighting factor is used for the yellow light model to establish and verify the source model.
Three different lenses were designed and sampled for experiments. The first lens was corrected for overlap-induced non-uniformity. In the second lens, refractive index differences between yellow and blue light caused discrepancies between simulation and experiment, requiring simulations with varying refractive indices. The final design of the third lens successfully resolved the issues encountered.

關鍵字(中)

★ 直下式背光模組
★ 混光距離
★ 中場擬合法
★ 權重因子
★ 光源模型

關鍵字(英)

★ Direct-Lit Backlight Module
★ Optical Distance
★ midfield region
★ Weighting Factor
★ Light Source Model

論文目次

摘要 I
Abstract II
致謝 III
目錄 IV
圖目錄 VI
第一章緒論 1
1-1 LED固態照明簡介 1
1-2 背光模組 2
1-3背光模組類別 4
1-4 研究動機 7
1-5 論文大綱 8
第二章研究理論 9
2-1 幾何光學 9
2-2 光度學 17
2-3中場擬合法 24
第三章 LED光源模型 26
3-1以顯微鏡觀察LED 26
3-2 LED量測 29
3-3LED模型建立 32
3-4LED模型驗證 35
第四章直下式背光模組透鏡之二次光學設計 38
4-1 光學設計概念 38
4-2 底部基板效應與黃藍光 40
4-3 Type 1透鏡設計 53
4-4 Type 2透鏡設計與問題 59
4-5 Type 3透鏡設計 79
第五章結論 86
參考文獻 88
中英文名詞對照表 93

參考文獻

參考文獻
1. F. Yam, and Z. Hassan, “Innovative advances in LED technology,” Microelectron. J.36, 129-137 (2005).
2. A. Žukauskas, M. S. Shur, and R. Gaska, “Light-emitting diodes: progress in solid-state lighting,” MRS Bull. 26, 764-769 (2001).
3. A. De Almeida, B. Santos, B. Paolo, and M. Quicheron, "Solid state lighting review–Potential and challenges in Europe," Renewable Sustainable Energy Rev. 34, 30-48 (2014).
4. D. A. Steigerwald, J. C. Bhat, D. Collins R.M. Fletcher; M.O. Holcomb; M.J. Ludowise, P.S. Martin; and S.L. Rudaz., “Illumination with solid state lighting technology,” IEEE J. Sel. Top. Quantum Electron. 8, 310-320 (2002).
5. Y. H. Won, H. S. Jang, K. W. Cho, Y. S. Song, D. Y. Jeon and H. K. Kwon, “Effect of phosphor geometry on the luminous efficiency of high-power white light-emitting diodes with excellent color rendering property,” Opt. Lett. 34, 1-3 (2009).
6. S. Muthu, F. J. Schuurmans, and M. D. Pashley, “Red, green, and blue LEDs for white light illumination,” IEEE J. Sel. Top. Quantum Electron. 8, 333-338 (2002).
7. Z. Gao, H. Ning, R. Yao, W. Xu, W. Zou, C. Guo, D. Luo, H. Xu and J. Xiao, “Mini-LED backlight technology progress for liquid crystal display,” Crystals. 12, 313 (2022).
8. T. Wu, C. W. Sher, Y. Lin, C. F. Lee, S. Liang, Y. Lu, S. W. Huang Chen, H. C. Kuo, and Z, Chen., “Mini-LED and micro-LED: promising candidates for the next generation display technology,” Applied sciences 8, 1557 (2018).
9. C. C. Chen, Y. T. Chuang, Y. M. Chen and T. F. Wu, “Multiphase multilamp driving system for LCD back light,” presented at IEEE 35th Annual Power Electronics Specialists Conference, Aachen, Germany , 20-25 June 2004.
10. C. L. Chiu, and K. H. Chen, “A high accuracy current-balanced control technique for LED backlight,” presented at 2008 IEEE Power Electronics Specialists Conference, Rhodes, Greece, 15-19 June 2008.
11. H. R. Moon, M. H. Shin, J. Y. Lee, K. J. Jang, Y. O. Chung, and Y. J. Kim, “Design of integrated light guide plate with functional structure of enhanced diffusion length for ultra-slim LED backlight unit, ” J. Disp. Technol. 11, 44-52 (2015).
12. C. H. Chien, and Z. P. Chen, “Design and fabrication of the concentric circle light guiding plate for LED-backlight module by MEMS technique,” Microsyst. Technol. 13, 1529-1535 (2007).
13. S. Aoyama, A. Funamoto, and K. Imanaka, “Hybrid normal-reverse prism coupler for light-emitting diode backlight systems,” Appl. Opt. 45, 7273-7278 (2006).
14. L. Zhou, S. Liu, and T. Zhong, “A comprehensive review of optical diffusers: progress and prospects,” Nanoscale 15, 1484-1492 (2023).
15. C. F. Chen, L. M. Lu, and Y. F. Jhou, “A Novel Optical Sheet with microstructures design in the LED Direct-lit Backlight Module,” Applied Mechanics and Materials 130, 4106-4109 (2012).
16. Y. Sekiguchi, A. Konno, and M. Tsumura, “Design method for a thin uniform direct backlight using a diffuser plate with a pattern on the surface and optical films,” Appl. Opt. 54, 482-491 (2015).
17. R. S. Chang, J. Z. Tsai, T. Y. Li, and H. L. Liao, “LED backlight module by lightguide-diffusive component,” J. Disp. Technol. 8, 79-86 (2012).
18. Z. Ding, Y. Liu, Y. Ma, Z. Zheng, M. Wang, P. Zeng, J. She, and R. Wu, “Direct design of thin and high-quality direct-lit LED backlight systems,” IEEE Photonics J. 13, 1-10 (2021).
19. C. Leiner, W. Nemitz, F. P. Wenzl and C. S. Sommer, “Ultrathin free-form micro-optical elements for direct-lit applications with a large distance-height ratio,” OSA Continuum 1, 1144-1157 (2018).
20. Y. J. Wang, J.-G. Lu, W.-C. Chao, and H.P. D. Shieh, "Switchable viewing angle display with a compact directional backlight and striped diffuser," Opt. Express 23, 21443-21454 (2015).
21. K. Fujisawa, I. Onishi, and Y. Fujiwara, “Edge-light backlight unit using optically patterned film,” Jpn. J. Appl. Phys. 46, 194 (2007).
22. Y. H. Ju, J. H. Park, J. H. Lee, Y. J. Y. Lee, K. B. Nahm, J. H. Ko, and J. H. Kim, “Study on the simulation model for the optimization of optical structures of edge-lit backlight for LCD applications,” J. Opt. Soc. Korea 12, 25-30 (2008).
23. S. Cha, T. Choi, H. Lee, and S. Sull, “An optimized backlight local dimming algorithm for edge-lit LED backlight LCDs,” J. Disp. Technol. 11, 378-385 (2015).
24. C. G. Son, J. H. Yi, J. S. Gwag, J. S. Gwang, J. H. Kwon, and G, J, Park, “Improvement of color and luminance uniformity of the edge-lit backlight using the RGB LEDs,” J. Opt. Soc. Korea 15, 272-277 (2011).
25. G. W. Yoon, S. W. Bae, Y. B. Lee, and J. B. Yoon, “Edge-lit LCD backlight unit for 2D local dimming,” Opt. Express 26, 20802-20812 (2018).
26. S. Zhang, H. Zheng, L. Zhou, H. Li, Y. Chen, C. Wei, T. Wu, W. Lv, G. Zhang, S. Zhang, Z. Gong, B. Jia, H. Lin, Z. Gao, W. Xu, and H. Ning, “Research progress of micro-LED display technology,” Crystals 13, 1001 (2023).
27. H. Cho, and O. K. Kwon, “A backlight dimming algorithm for low power and high image quality LCD applications,” IEEE Trans. Consum. Electron. 55, 839-844 (2009).
28. E. Nadernejad, N. Burini, J. Korhonen, S., Forchhammer, and C. Mantel, “Adaptive local backlight dimming algorithm based on local histogram and image characteristics,” presented at SPIE 8652, Color Imaging XVIII: Displaying, Processing, Hardcopy, and Applications, California, United States, 4 February, 2013.
29. B. L. Huang, J. t. Lin, Y. Ye, S. Xu, E. Chen, and T. L. Guo, “Pattern optimization of compound optical film for uniformity improvement in liquid-crystal displays,” Opt. Laser Technol. 97, 254-259 (2017).
30. P. Xu, T. Luo, X. Zhang, Z. Su, Y. Huang, X. Li, and Y Zou., “Design and optimization of a partial integrated backlight module,” Opt. Commun. 427, 589-595 (2018).
31. B. T. Chen, and J. W. Pan, “Dual-view angle backlight module design,” Appl. Opt. 54, E80-E87 (2015).
32. J. Balzer, and S. Werling, “Principles of shape from specular reflection,” Measurement 43, 1305-1317 (2010).
33. L. B. Wolff, “Relative brightness of specular and diffuse reflection,” Opt. Eng. 33, 285-293 (1994).
34. J. D. Zook, “A simple model for diffuse reflection, ” Opt. Commun. 17, 77-82 (1976).
35. D. Look, “Diffuse reflection from a plane surface, ” JOSA 55, 1628-1632 (1965).
36. M. Oren, and S. K. Nayar, “Generalization of the Lambertian model and implications for machine vision, ” Int. J. Comput. Vision 14, 227-251 (1995).
37. A. Maradudin, I. Simonsen, T. Leskova, and E. Méndez, “Design ofone-dimensional Lambertian diffusers of light, ” Waves in Random Media 11, 529 (2001).
38. 孫慶成，光電工程概論(全華圖書股份有限公司，新北市，2012)。
39. C. C. Sun, T. X. Lee, S. H. Ma, Y.L. Lee and S. M. Huang, “Precise optical modeling for LED lighting verified by cross correlation in the midfield region, ” Opt. Lett. 31, 2193-2195 (2006).
40. W. T. Chien, C. C. Sun, and I. Moreno, “Precise optical model of multi-chip white LEDs," Opt. Express 15, 7572-7577 (2007).
41. C. C. Sun, W. T. Chien, I. Moreno, C. C. Hsieh, and Y. C. Lo, “Analysis of the far-field region of LEDs, ” Opt. Express 17, 13918-13927 (2009).
42. C. C. Sun, Y. Y. Chang, Y. H. Wang, C. Y. Chen, Y. C. Lo, and H. H. Cheng, "Precise spatial-color optical modeling in phosphor-converted white LEDs," J. Disp. Technol.11, 261-265 (2015).
43. C. C. Sun, Y. S. Lin, T. H. Yang, S. K. Lin, X. H. Lee, C. S. Wu and Y.W. Yu, "Illuminance and starting distance of the far field of LED-array luminaire operated at short working distance," Crystals10, 360 (2020).
44. C. C. Sun, I. Moreno, Y. C. Lo, B. C. Chiu, and W. T. Chien, "Collimating lamp with well color mixing of red/green/blue LEDs," Opt. Express20, A75-A84 (2012).
45. 林欣蓉，雙晶白光 LED 用於德規車前燈之光學設計，國立中央大學光電所碩士論文，中華民國一百零九年。
46. 彭柏翔，稀疏排列之LED直下式背光板之二次光學設計，國立中央大學光電所碩士論文，中華民國一百一十一年。
47. Canon, “EOS 600D 規格.” https://tw.canon/zh_TW/support/6200098100.
48. 蕭力瑋，高動態範圍影像式照度即時檢測系統，國立中央大學光電所碩士論文，中華民國一百一十年。

指導教授

孫慶成(Ching-Cherng Sun)

審核日期

2024-8-13

推文