異質接合尼龍6與連續碳纖維纏繞之鋁合金嵌件包覆射出成型研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：101

、訪客IP：3.139.85.35

姓名

林伯紘(Bo-Hung Lin) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

異質接合尼龍6與連續碳纖維纏繞之鋁合金嵌件包覆射出成型研究
(Heterogeneous bonding of polyamide 6 and continuous carbon fibers winding aluminum alloy inserts for over-molding injection)

相關論文

★ 田口分析法驗證射出參數對光碟機面板翹曲變形量之研究	★ 聚丙烯射出成型品表面具抗沾黏特性之研究
★ 光學鏡片之有限元素網格品質探討暨模仁全方位體積收縮補償法之研究	★ 從模流到結構的集成分析光學鏡片之模仁變形研究
★ 應用反應曲面法進行鏡筒真圓度之射出成型參數優化	★ 冠狀動脈三維重建之初步架構
★ Zienkiewicz動態多孔彈性力學模型之穩定性探討	★ 外加磁場輔助射出成型對於導電高分子複合材料的磁性纖維配向與導電度之實驗與模擬
★ 骨板與骨釘之參數模型應用於股骨骨折術前規劃	★ 光學鏡片模具之異型水路最佳化設計
★ 傳統骨板與解剖骨板對於固定Sanders II-B型跟骨骨折力學分析	★ 以線性迴歸分析驗證射出成型縫合角與抗拉強度呈正相關
★ 異形水路模具設計對於金屬粉末射出成型槍機卡榫影響之研究	★ 槍機卡榫模流分析參數最佳化之研究
★ 聚碳酸酯與碳纖維複合材料之射出參數對於縫合線強度之研究	★ 運用田口方法分析ABS塑膠材料之射出成型參數對拉伸強度的影響

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

現今講求輕量且兼具高強度性能之產品在市面上已越發常見，在眾多
材料中各類皆有其特點，如塑膠材料就有重量輕、低成本及易成形的特性，
金屬材料則是有著高強度、導熱性良好的性能而常被應用於工業之中，因
此本次研究將探討以射出成型將異質材料接合之製程，首先會以SolidWorks設計嵌件，再使用Moldex3D軟體模擬分析連續碳纖維經過熔膠充填所造成的偏移，而後使用塑料尼龍6 (Nylon 6)又稱聚醯胺6(Polyamide 6, PA6)與鋁嵌件以射出成型的製造方式，將兩相異質材料做結合以減少二次加工達到取長補短的效果，擺脫傳統接合的方式並發揮其特點，此外還會加入連續碳纖維(continuous carbon fibers)強化複合材料以提升試片之性能，最後以拉伸試驗測試試片之抗拉強度再進行分析與探討。
由Moldex3D 模擬結果可知連續碳纖維X型纏繞鋁嵌件的製作方式可
行，除了能有效地使纖維纏繞固定在嵌件上並維持拉力外，也排除纖維偏
移至試片外之瑕疵。本研究實驗所使用的是包覆成型中的嵌件射出成型，
先將連續碳纖維纏繞上鋁嵌件形成所需的預製件後，置入模穴內並充填塑
料，待其保壓與冷卻頂出後即完成一個成型品，該製程參數是使用田口法
四因子三水準的L9(34)直交表來進行射出，待試片完成後則進行拉伸試驗的步驟。
最終拉伸結果顯示，PA6加連續碳纖維與純PA6相比，只有些微的增
強其抗拉強度，且試片內含有屬於脆性材料的連續碳纖維使得原材料性質
為延性的PA6 發生改變，鋁嵌件的存在也影響熔膠的流動進而導致過多的
殘留應力出現於嵌件周圍，最終在拉伸時於該範圍產生斷裂破壞的情況，
至此期望此次研究結果於未來對其製程優化時能做為參考之依據。

摘要(英)

The demand for high-strength lightweight products has become increasingly common in the market. Among various materials, plastics are known for their light weight, low cost, and ease of forming, while metals offer high strength and good thermal conductivity, making them widely used in
industries. Therefore, this study explores the process of combination of heterogeneous materials through injection molding. Initially, components are designed using SolidWorks, followed by simulation and analysis using
Moldex3D software to examine the displacement caused by continuous carbon fibers during the melt-filling process. Subsequently, Nylon 6, also known as Polyamide 6 (PA6), and aluminum components are manufactured using the
injection molding process to combine the two dissimilar materials, aiming to reduce secondary processing and leverage their respective advantages.Additionally, continuous carbon fibers are incorporated into the composite
material to enhance the performance of the specimens. Finally, tensile tests are conducted to analyze and discuss the specimens’ tensile strength.
The Moldex3D simulation results demonstrate the feasibility of the process involving continuous carbon fibers wound at X type around aluminum components, effectively securing the fibers to the components and preventing displacement flaws in the specimens. The experimental process used in this study involves insert molding in over-molding injection, where continuous
carbon fibers are wound onto aluminum components to form performance parts,which are then placed in the mold cavity and filled with plastic. Upon completion of the molding process, parameters are determined using the Taguchi
method with an L9(34) orthogonal array. After the specimens are produced,tensile tests are conducted.
The final tensile test results show that PA6 reinforced with continuous carbon fibers exhibits a slight increase in tensile strength compared to pure PA6.Moreover, the presence of brittle continuous carbon fibers in the specimen alters
the ductile nature of PA6. The presence of aluminum inserts also affects the flow of the melt, leading to excessive residual stresses around the inserts, ultimately
resulting in fracture within that region during tensile testing. These findings are expected to be a reference for optimizing the process in future research.

關鍵字(中)

★ 包覆成型
★ 嵌件成型
★ 異質材料結合
★ 連續碳纖維
★ PA6

關鍵字(英)

★ Over-molding
★ Insert molding
★ Combination of heterogeneous materials
★ Continuous Carbon Fiber
★ PA6

論文目次

摘要.......................................................I
Abstract..................................................II
誌謝......................................................IV
目錄.......................................................V
圖目錄...................................................VII
表目錄....................................................IX
第一章、緒論................................................1
　1-1 前言.................................................1
　1-2 文獻回顧.............................................2
　1-3 研究動機與目的........................................4
　1-4 研究流程.............................................5
第二章、基本原理與理論模式...................................6
　2-1 射出成型原理..........................................6
　　2-1-1 塑化階段..........................................6
　　2-1-2 充填階段..........................................6
　　2-1-3 保壓階段..........................................7
　　2-1-4 冷卻階段..........................................7
　2-2 嵌件射出成型..........................................8
　2-3 混合成型製程原理......................................8
　2-4 實驗設計法............................................9
　2-5 田口方法.............................................9
　　2-5-1 田口式直交表......................................9
　　2-5-2 訊噪比分析.......................................10
　2-6 拉伸試驗............................................12
　　2-6-1 楊氏係數.........................................12
　　2-6-2 抗拉強度.........................................12
　　2-6-3 應力-應變曲線 ..................................13
第三章、研究方法...........................................14
　3-1 實驗材料............................................14
　3-2 產品設計............................................19
　3-3 實驗設備............................................24
　3-4 實驗分析軟體.........................................32
第四章、結果與討論.........................................33
　4-1 射出成型製程參數規劃..................................33
　4-2 塑膠與連續碳纖維材料參數設定..........................35
　4-3 型芯偏移結果.........................................36
　4-4 X型纏繞模擬結果......................................40
　　4-4-1 縫合線..........................................42
　　4-4-2 殘留應力.........................................43
　4-5 田口法L9(34)........................................46
　4-6 兩種纏繞方式之射出成型結果............................47
　　4-6-1 平行纏繞.........................................47
　　4-6-2 X型纏繞.........................................49
　4-7 拉伸試驗結果.........................................50
　4-8 最佳參數組...........................................54
　4-9 最佳參數實驗結果比較..................................56
第五章、結論...............................................60
第六章、未來展望...........................................62
參考文獻..................................................64

參考文獻

[1]R.-Y. Chang, Y.-H. Peng, D. Hsu, and Y. Yang, "Three-dimensional insert molding simulation in injection molding," in ANTEC-CONFERENCE PROCEEDINGS-. 2004, vol. 1: UNKNOWN, pp. 496-500.
[2]N. Svensson, R. Shishoo, and M. Gilchrist, "Manufacturing of thermoplastic composites from commingled yarns-A review," Journal of Thermoplastic Composite Materials, vol. 11, no. 1, pp. 22-56, 1998.
[3]許弘林, "金屬嵌件塑膠射出成型製程特性與產品品質之研究," 碩士, 機械工程研究所, 遠東科技大學, 台南市, 2013. [Online]. Available: https://hdl.handle.net/11296/pgm28d
[4]黃靖師, "使用埋入射出成形製程對於手機顯示器模組強度改善之研究," 碩士, 工學院碩士在職專班精密與自動化工程組, 國立交通大學, 新竹市, 2010. [Online]. Available: https://hdl.handle.net/11296/gm8n9y
[5]S.-Y. Fu, B. Lauke, E. Mäder, C.-Y. Yue, and X. Hu, "Tensile properties of short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites," Composites Part A: Applied Science and Manufacturing, vol. 31, no. 10, pp. 1117-1125, 2000.
[6]B. Beck, H. Tawfik, J. Haas, Y.-B. Park, and F. Henning, "Automated 3D skeleton winding process for continuous-fiber-reinforcements in structural thermoplastic components," in Advances in Polymer Processing 2020: Proceedings of the International Symposium on Plastics Technology, 2020: Springer, pp. 150-161.
[7]R. J. Glebes, "Performance Informed Technical Cost Modeling for Novel Manufacturing," Purdue University Graduate School, 2019.
[8]高軒羿, "具金屬嵌件塑膠射出成型產品翹曲量研究," 碩士, 機械工程學所, 逢甲大學, 台中市, 2011. [Online]. Available: https://hdl.handle.net/11296/p2578m
[9]V. Heinzle, T. Huber, F. Henning, and P. Elsner, "Process development of injection molded parts with wound fiber structures for local reinforcement," in AIP Conference Proceedings, 2014, vol. 1593, no. 1: American Institute of Physics, pp. 736-740.
[10]蔡穎玫、葉羽馨、王茂齡, "射出成型," 科學發展月刊, p. 51, 2019,7,559期.
[11]榮紹塑膠. "塑膠射出知識庫:塑膠射出成型原理與製程大公開." (accessed https://www.lon-so.com/plastic-injection-knowledge-info-30.htm, 2021).
[12]台灣區電腦輔助成型技術交流協會. "射出成型穩定的關鍵：淺談塑料流動阻力." (accessed http://www.caemolding.org/cmm/lcpf-202007/, 2020).
[13]林炫良, "厚件產品保壓過程對於收縮率與殘留應力影響之研究," 碩士, 機械工程研究所, 中原大學, 桃園縣, 2003. [Online]. Available: https://hdl.handle.net/11296/4e398x
[14]SMARTMolding. "射出製程的冷卻時間加工條件." (accessed https://www.smartmolding.com/18-04c04/, 2021).
[15]"材料世界網."可提高CFRP生產性2倍以上之混合成型技術"." (accessed https://www.materialsnet.com.tw/DocView.aspx?id=29682, 2017).
[16]Y. Kuroda, "Plastics with Unidirectional Reinforcement for the Series," Lightweight Design worldwide, vol. 11, no. 5, pp. 54-57, 2018.
[17]榮紹塑膠. "什麼是熱塑性塑膠，熱固性塑膠." (accessed https://www.lon-so.com/m/plastic-injection-knowledge-info-8.html, 2020).
[18]塑膠小站. "熱塑性與熱固性塑膠." (accessed http://myplastics.blogspot.com/2010/08/blog-post.html, 2010).
[19]LORRIC. "結晶性塑膠與非結晶性塑膠之比較." (accessed https://www.lorric.com/tw/WhyLORRIC/Roechling/amorphous-vs-semi-crystalline.
[20]榮紹塑膠. "PA6與PA66的物性比較表." (accessed https://www.lon-so.com/materials-pa6%20vs%20pa66.htm.
[21]集盛科技股份有限公司. "尼龍複合材料詳細規格." (accessed http://www.zigsheng.com/zig-sheng-products-zh/nylon-compound-material-zh/pa6-zh/.
[22]台灣塑膠工業股份有限公司. "碳纖維." (accessed http://www.fpc.com.tw/fpcw/index.php?op=proL&f=1&s=17.
[23]台灣塑膠工業股份有限公司. "碳纖維TC42S Intermediate Modulus TAIRYFIL Carbon Fiber." (accessed http://www.fpc.com.tw/fpcwuploads/pdocument/pdocument_210916163903.pdf.
[24]法寶實業有限公司. "鋁合金物理及機械性質表." (accessed http://www.fapolu.com.tw/aluminum.html.
[25]台中精機. "台中精機VsP系列塑膠射出成型機規格表." (accessed https://www.victortaichung.com/injection-machines/tw/vsp.htm.
[26]潤輝科技有限公司. "油式溫度控制機AO系列規格表." (accessed http://www.a1-max.com.tw/product/detail1.html.
[27]晏邦電機工業有限公司. "料斗乾燥機(HD/IHD/DHD)規格表." (accessed https://www.yannbang.com/hopper-dryer-tw.
[28]INSTRON. "Floor standing Fatigue Testing Systems Specification Table." (accessed https://www.instron.cn/zh-cn/products/testing-systems/dynamic-and-fatigue-systems/servohydraulic-fatigue/8801---8802.
[29]B. A. Newcomb, "Processing, structure, and properties of carbon fibers," Composites Part A: Applied Science and Manufacturing, vol. 91, pp. 262-282, 2016.
[30]C. Pradere and C. Sauder, "Transverse and longitudinal coefficient of thermal expansion of carbon fibers at high temperatures (300–2500 K)," Carbon, vol. 46, no. 14, pp. 1874-1884, 2008.
[31]W. Yi, L. Lu, Z. Dian-Lin, Z. Pan, and S. Xie, "Linear specific heat of carbon nanotubes," Physical Review B, vol. 59, no. 14, p. R9015, 1999.
[32]M. D. H. 2023. "雙向型芯偏移 (Two- Way Core Shift)." (accessed https://support.moldex3d.com/2023/zh-TW/6-8-5_two-waycoreshift.html.
[33]蔡毓斌, "塑膠射出成型之結合線與殘留應力之改善研究," 2010.
[34]葉人瑜, "嵌入式射出成型製品殘留應力之研究與改善," 2010.
[35]辛維朗, "結合反應曲面法與蟻群演算法探討尼龍 6 之纖維複合材料射出成型縫合線強度最佳化," 碩士, 機械工程研究所, 國立中央大學, 桃園市, 2023.
[36]李輝煌, 田口方法-品質設計的原理與實務(第四版). 2011.

指導教授

鍾禎元(Chen-Yuan Chung)

審核日期

2024-7-9

推文