參考文獻 |
參考文獻
[1]. http://www.uwbforum.org
[2]. G. Roberto Aiello and Gerald D. Rogerson, “Ultra-Wideband Wireless Systems”, IEEE Microwave Magazine, vol.4, Issue 2, pp.36-47, June 2003
[3]. R. Harjani, J. Harvey, and R. Sainati, “Analog/RF physical layer issues for UWB systems”, VLSI Design, Proceedings. 17th International Conference, pp.941-948, 2004
[4]. D. Porcino, W. Hirt, “Ultra-Wideband Radio Technology: Potential and Challenges Ahead”, IEEE Communications Magazine, vol.41, Issue 7, pp.66-74, July 2003
[5]. M. P. Wylie-Green, P. A. Ranta, J. Salokannel, “Multi-band OFDM UWB solution for IEEE 802.15.3a WPANs”, Advances in Wired and Wireless Communication, 2005 IEEE/Sarnoff Symposium, pp.102-105, April 18-19, 2005
[6]. G. Racherla, J. L. Ellis, D. S. Furuno, S. C. Lin, “Ultra-Wideband systems for data communications”, Personal Wireless Communications, 2002 IEEE International Conference, pp.129-133, Dec. 2002
[7]. A. Batra et al., “Multi-band OFDM Physical Layer Proposal”, merged proposal for IEEE 802.15.3a, https://ieee802.org/15/pub/Download.html, July 2003
[8]. A. Batra, ; J. Balakrishnan, ; G.R. Aiello, ; J.R. Foerster, ; A. Dabak, “Design of a multiband OFDM system for realistic UWB channel environments”, IEEE Transactions on Microwave Theory and Techniques, vol. 52, Issue 9, Part 1, Sept. 2004
[9]. 德州儀器DSPS研發中心
[10]. B. Shi; Chia, M.Y.W., “A 3.1-10.6 GHz RF front-end for multiband UWB wireless receivers”, IEEE Radio Frequency integrated Circuits (RFIC) , 12-14 June 2005
[11]. A. Ismail, M. Olsson, H., “A wide-band RF front-end for multiband multistandard high-linearity low-IF wireless receivers”, IEEE Journal of Solid-State Circuits, Volume 37, Issue 9, Sep 2002
[12]. P. Heydari, D. Lin, A. Shameli, Yazdi, A., “Design of CMOS distributed circuits for multiband UWB wireless receivers”, IEEE Radio Frequency integrated Circuits (RFIC) , 12-14 June 2005
[13]. C. S. Lin; P. S. Wu; H. Y. Chang; H. Wang, “A 9–50-GHz Gilbert-Cell Down-Conversion mixer in 0.13-?m CMOS Technology,” IEEE Microwave and Wireless Components Letters, volume 16, Issue 5, May 2006 Page(s):293 - 295
[14]. A.Q. Safarian, A. Yazdi, P. Heydari, “Design and analysis of an ultrawide-band distributed CMOS mixer” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, volume 13, Issue 5, May 2005 Page(s):618 - 629
[15]. M. D. Tsai, H. Wang, “A 0.3-25-GHz Ultra-Wide-Band mixers Using Commercial 0.18μm CMOS Technology,” volume 14, Issue 11, Nov. 2004 Page(s):522 - 524
[16]. M.T. Terrovitis, R.G. Meyer, “Noise in current-commutating CMOS mixers,” IEEE Journal of Solid-State Circuits, volume 34, Issue 6, June 1999
[17]. H. Darabi, A.A. Abidi, “Noise in RF-CMOS mixers: a simple physical model”, IEEE Journal of Solid-State Circuits, volume 35, Issue 1, Jan. 2000
[18]. P. Heydari, “High-frequency noise in RF active CMOS mixers”, Design Automation Conference, 2004. Proceedings of the ASP-DAC 2004. Asia and South Pacific, 27-30 Jan. 2004
[19]. C. W. Kim, M. S. Kang, P. T. Anh, H. T. Kim, and S. G. Lee, “An ultra-wideband CMOS low noise amplifier for 3-5-GHz UWB system,” IEEE J. of Solid-State Circuits, vol. 40, no. 2, pp. 544–547, Feb. 2005.
[20]. C. P. Chang, and H. R. Chuang, “0.18-μm 3-6 GHz CMOS broadband low noise amplifier for UWB radio,” Electronics Lett., vol. 41, No. 12, pp. 696–698, 9th June 2005.
[21]. R. Gharpurey, “A broadband low-noise front-end amplifier for ultra wideband in 0.13-?m CMOS,” IEEE J. of Solid-State Circuits, vol. 40, no. 9, pp. 1983–1986, Sept. 2005
[22]. C. F. Liao, and S. I. Liu, “A broadband noise-canceling CMOS low noise amplifier for 3.1-10.6-GHz UWB receiver,” in Proc. IEEE Custom Integrated Circuits Conference (CICC), 18–21 Sept. 2005, pp. 161–164.
[23]. M. D. Tsai; K. Y. Lin; H. Wang, “A 5.4-mW low noise amplifier using 0.35- /spl mu/m SiGe BiCMOS technology for 3.1-10.6-GHz UWB wireless receivers“ Radio Frequency integrated Circuits (RFIC) Symposium, 2005. Digest of Papers. 2005 IEEE, 12-14 June 2005 Page(s):335 - 338
[24]. A. Bevilacqua, and A. M. Niknejad, “An ultra-wideband CMOS low noise amplifier for 3.1 to 10.6 GHz wireless receivers,” IEEE J. of Solid-State Circuits, vol. 39, no. 12, pp. 2259–2268, Dec. 2004.
[25]. H. Ahn et al, “A 0.5-8.5 GHz Fully Differential CMOS Distributed Amplifier”, IEEE Journal of Solid-State Circuits, vol.37, no. 8, Aug.2002, pp. 985-993, Aug. 2002.
[26]. K. Krishnamurthy, R. Vetury, S. Keller, Umesh Mishra, Mark J. W. Rodwell and Stephen I. Long, “Broadband GaAs MESFET and GaN HEMT Resistance Feedback Power Amplifiers”, IEEE Journal of Solid-State Circuits, vol.35, no. 9, Sept. 2000, pp. 1285-1291.
[27]. D. K. Shaeffer, and T. H. Lee, “A 1.5-V, 1.5-GHz CMOS low noise amplifier,” IEEE J. Solid-State Circuits, vol. 32, no. 5, pp. 745–759, May 1997.
[28]. K. J. Sun, Z. M. Tsai, K. Y. Lin, H. Wang, “A Noise Optimization Formulation for CMOS Low-Noise Amplifiers With On-Chip Low-Q inductors”, IEEE Transactions on Microwave Theory and Techniques, Volume 54, Issue 4, Part 1, April 2006
[29]. T. K. Nguyen, S. G. Lee, “Noise and gain optimization technique for RF-integrated CMOS low noise amplifier” Electron Devices and Solid-State Circuits, 2003 IEEE Conference on, 16-18 Dec. 2003
[30]. A. Ismail, A. A. Abidi, “A 3-10-GHz low-noise amplifier with wideband LC-ladder matching network,” IEEE J. Solid-State Circuits, vol. 39, no. 12, pp. 2269–2277, Dec. 2004.
[31]. T. H. Lee, “The design of CMOS radio-frequency integrated circuits” Communications Engineer, Volume 2, Issue 4, Aug.-Sept. 2004
[32]. S.S. Mohan, M.D.M. Hershenson, S.P. Boyd, T.H. Lee, “Bandwidth extension in CMOS with optimized on-chip inductors” IEEE J. Solid-State Circuits, Volume 35, Issue 3, March 2000
[33]. Behzad Razavi University of California, Los Angeles “RF Microelectronics”
[34]. D. J. Cassan, J. R. Long, “A 1-V transformer-feedback low-noise amplifier for 5-GHz wireless LAN in 0.18-/spl mu/m CMOS”, IEEE J. Solid-State Circuits, Volume 38, Issue 3, March 2003
[35]. J.R. Long, “Monolithic transformers for silicon RF IC design” IEEE J. Solid-State Circuits, Volume 35, Issue 9, Sept. 2000
[36]. J.J. Zhou and D. J. Allstot, “Monolithic transformers and their application in a differential CMOS RF low-noise amplifier,” IEEE J. Solid-State Circuits, vol. 33, no.12, pp. 2020-2027, Dec. 1998.
[37]. M. Danesh and J. Long, “Differential driven symmetric microstrip inductors,” IEEE Trans. Microwave Theory and Techniques, vol. 50, no. 1, Jan. 2002.
[38]. N. Marchand, “Transmission Line conversion transformers,” Electron., vol.17, pp. 142, Dec. 1994.
[39]. Y. K. Koutsoyannopoulos, Member, IEEE and Yannis Papananos, Senior Member, IEEE “Systematic Analysis and Modeling of Integrated Inductors and Transformers in RF IC Design,” IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS-II: ANALOG AND DIGITAL SIGNAL PROCESSING, VOL. 47, NO. 8, AUGUST 2000
[40]. S. Krishnan, D. Mensa, J. Guthrie, S. Jaganathan, T. Mathew, R. Girish, Y. Wei and Mark J. W. Rodwell, “Broadband Lumped HBT amplifiers”, IEEE Electronics Letters vol. 36, no.5, pp.466-467, March 2000.
[41]. R. C. Liu, Student Member, IEEE, Chin-Shen Lin, Student Member, IEEE, Kuo-Liang Deng, and Huei Wang, Senior Member, IEEE, “Design and Analysis of DC-to-13-GHz and 22-GHz CMOS Cascode Distributed Amplifiers”, IEEE Journal of Solid-State Circuits, vol. 39, no. 8, August 2004 |