Preparation of super-hydrophobic films using pulsed hexafluorobenzene plasma

NCU Institutional Repository > 工學院 > 化學工程與材料工程研究所 > 期刊論文 > Item 987654321/26422

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26422

題名:	Preparation of super-hydrophobic films using pulsed hexafluorobenzene plasma
作者:	Yang,SH;Liu,CH;Hsu,WT;Chen,H
貢獻者:	化學工程與材料工程學系
關鍵詞:	DEPOSITION;SURFACE;POLYMERIZATION;CVD
日期:	2009
上傳時間:	2010-06-29 17:27:42 (UTC+8)
出版者:	中央大學
摘要:	In this study, super-hydrophobic films were deposited in a one-step simple process by pulsed RF C6F6 plasma, and the influence of the duty-cycle (DC) on the surface structure and chemical characteristics of depositing fluorocarbon films was examined. The deposited coatings were analyzed by X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared Spectrometry (FTIR), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Contact Angle Analyzer. It was found that by decreasing the DC from 1 to 0.1, the rough structure of the film with a lot of particles was obtained. In addition, the superhydrophobic property was obtained on this composite fluorocarbon film. Finally, the adhesion of fluorocarbon films could be increased by deposited on the cotton fiber substrates instead of Si wafer. (c) 2008 Elsevier B.V. All rights reserved.
關聯:	SURFACE & COATINGS TECHNOLOGY
顯示於類別:	[化學工程與材料工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	528	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing