Development of automatic surface reconstruction technique in reverse engineering

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26848

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26848

题名:	Development of automatic surface reconstruction technique in reverse engineering
作者:	Tsai,YC;Huang,CY;Lin,KY;Lai,JY;Ueng,WD
贡献者:	機械工程研究所
关键词:	QUADRILATERAL MESH GENERATION;STEREOLITHOGRAPHY FILE ERRORS;CONTINUITY;ALGORITHM;REPAIR
日期:	2009
上传时间:	2010-06-29 18:01:38 (UTC+8)
出版者:	中央大學
摘要:	The computer-aided design model reconstruction process is generally very complex, as it requires substantial efforts in planning and editing data points, curves, and surfaces. A novel method is developed in this study for automatic surface reconstruction from a huge number of triangular meshes. The proposed method is mainly composed of the following five steps: mesh simplification, quadrilateral mesh generation, curve net construction, connectivity data preparation, and multiple surfaces fitting with G(1) continuity across the boundaries. The first three steps build the boundary curves of the surfaces. The fourth step prepares the data needed for surface fitting, which includes segmented points, continuity conditions on the boundaries, and topological relationship of the data. In the final step, all regions of points are fitted into appropriate surfaces, with the accuracy and smoothness of the surfaces controlled and G(1) continuity between the surfaces. A detailed discussion for each of the above algorithms is provided. Successful examples are also presented to demonstrate the feasibility of the proposed method.
關聯:	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	580	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....