Friction drilling of austenitic stainless steel by uncoated and PVD AlCrN- and TiAlN-coated tungsten carbide tools

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26863

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26863

题名:	Friction drilling of austenitic stainless steel by uncoated and PVD AlCrN- and TiAlN-coated tungsten carbide tools
作者:	Lee,SM;Chow,HM;Huang,FY;Yan,BH
贡献者:	機械工程研究所
关键词:	CUTTING TOOLS;COATINGS;PERFORMANCE;WEAR
日期:	2009
上传时间:	2010-06-29 18:01:57 (UTC+8)
出版者:	中央大學
摘要:	Friction drilling utilizes the heat generated from the friction between the tool and the thin workpiece to form a bush for fixtures such as screw threads in plastic deformation process. This process produces no chip, shortens the time required for hole-making and incurs less toot wear, thus lengthening the service life of the drill. In this study. tungsten carbide drills with and without coating were employed to make holes in AISI 304 stainless steel, which is known to have high ductility, low thermal conductivity and great hardness. TiAlN and AlCrN were coated onto the drill surface by physical vapor deposition (PVD). Performance of coated and uncoated cutting tools was examined for drillings made under different spindle speeds. Changes in relationship between drill surface temperature, tool wear and axial thrust force during machining were also explored. Experimental results reveal that lubricating effect of the coating and low thermal conductivity of AlCrN caused AlCrN-coated drill to produce the highest surface temperature but the lowest axial thrust force with the least tool wear. However, the difference in performance between coated and uncoated drills diminished with increase in number of holes drilled. Crown Copyright (C) 2008 Published by Elsevier Ltd. All rights reserved.
關聯:	INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	521	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....