Method for determining the junction temperature of alternating current light-emitting diodes

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26873

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26873

題名:	Method for determining the junction temperature of alternating current light-emitting diodes
作者:	Hwu,FS;Sheu,GJ;Lin,MT;Chen,JC
貢獻者:	機械工程研究所
關鍵詞:	OPERATION
日期:	2009
上傳時間:	2010-06-29 18:02:11 (UTC+8)
出版者:	中央大學
摘要:	A numerical simulation was used to simulate the temperature distribution during AC and DC operations of an alternating current light-emitting diode (AC LED). The relationship between the junction temperature and the temperature at the centre of the bottom surface of the submount of an AC LED was measured under DC operation. This relationship was confirmed by numerical simulation. The numerical results were consistent with the experimental observations in that the temperature at the centre of the bottom surface of the submount was insensitive to the current variations that occur in an AC LED, probably because of the large mass of the submount. However, it was difficult to measure the temperature oscillation at the junctions in an AC LED, although this oscillation can be clearly seen in the numerical results. Thus, the authors propose a formula for predicting the range of the oscillating junction temperature for an AC LED.
關聯:	IET SCIENCE MEASUREMENT & TECHNOLOGY
顯示於類別:	[機械工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	386	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing