Thermally Formed Oxides on Al-2 and 3.5 mass% Mg Alloys Heated and Held in Different Gases

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > journal & Dissertation > Item 987654321/26903

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/26903

Title:	Thermally Formed Oxides on Al-2 and 3.5 mass% Mg Alloys Heated and Held in Different Gases
Authors:	Chen,PC;Shih,TS;Wu,CY
Contributors:	機械工程研究所
Keywords:	ALUMINUM;OXIDATION;MAGNESIUM;MECHANISM;FILMS;NITROGEN;KINETICS;QUALITY;OXYGEN
Date:	2009
Issue Date:	2010-06-29 18:02:53 (UTC+8)
Publisher:	中央大學
Abstract:	Weight changes in Al-2 and 3.5 mass% Mg alloy samples were measured by thermogravimetric analysis. X-ray diffractometer tests were used to investigate the progressive development of thermally formed oxide films on the samples. Both samples were first heated in a dry air atmosphere. The oxide film formed on the Al-2 mass% sample comprised gamma-alumina, MgO, MgAl2O4, and gibbsite. The film formed on the Al-3.5 mass% sample contained large quantities of MgO, but no MgAl2O4. The samples were then heated in a nitrogen gas atmosphere for < 1.9 h. The A1-3.5 mass% sample contained greater amounts of gibbsite and gamma-alumina than did the Al-2 mass% sample. The latter yielded a greater amount of AIN (and/or MgO). After an extended holding time (similar to 6h), the Al-3.5 sample contained a greater amount of AIN (and/or MgO), and its weight increased remarkably. The as-cast samples containing the Al-3.5 mass%Mg cube had a higher percentage of foggy film compared to those containing an Al-2 mass%Mg cube. Oxide films that are readily formed during melting tend to be trapped in aluminum alloy castings. [doi:10.2320/matertrans.M2009155]
Relation:	MATERIALS TRANSACTIONS
Appears in Collections:	[Graduate Institute of Mechanical Engineering] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	465	View/Open

社群 sharing

Loading...