Cutting austempered ductile iron using an EDM sinker

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26913

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26913

题名:	Cutting austempered ductile iron using an EDM sinker
作者:	Wang,CC;Yan,BH;Chow,HM;Suzuki,Y
贡献者:	機械工程研究所
关键词:	N/A
日期:	1999
上传时间:	2010-06-29 18:03:08 (UTC+8)
出版者:	中央大學
摘要:	The cutting of austempered ductile iron (ADI) was investigated in this study. Electro-discharge sinker machining (EDM) was employed to machine ADI materials by using a copper electrode, which was shaped into a different geometrical form. Machinability was evaluated in terms of the metal removal rate, electrode wear rate and surface finish within the machining conditions explored. A suitable pitch electrode was developed to machine ADI materials with higher removal rate and lower surface finish than those without a pitch electrode. The predictions were verified using an EDM process with appropriate reciprocation of the movement in the machining process. (C) 1999 Elsevier Science S.A. All rights reserved.
關聯:	JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	456	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing