Numerical simulation for the transverse impregnation in resin transfer molding

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26969

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26969

题名:	Numerical simulation for the transverse impregnation in resin transfer molding
作者:	Chang,CY;Hourng,LW
贡献者:	機械工程研究所
关键词:	STITCHED FIBERGLASS MAT;VOID FORMATION;COMPOSITES;REMOVAL;MODEL;VARIABLES;RTM
日期:	1998
上传时间:	2010-06-29 18:04:27 (UTC+8)
出版者:	中央大學
摘要:	A model has been developed for the transverse impregnation of the resin into a continuous unidirectional packed fiber bundles. The model takes into account two types of flow, namely the macro-flow around the fiber bundles and the micro-flow around the fibers in the bundles, occurring simultaneously. Both flows are described by Darcy's law. Results show that an elliptic type void is formed within the fiber bundle under certain circumstances. The void will soon shrink to nothing soon if vacuum assistance is applied in the mold, while it is mobilized and compressed if vacuum assistance is not applied in the mold. By the similarity analysis, we also show that the initial size of the trapping air depends merely on the ratio of permeability between the micro-flow and macro-flow, but not on the injection pressure and the resin viscosity. The numerical simulation is based on the body-fitted finite element method.
關聯:	JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	428	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing