HIGH-STRAIN RATE TENSILE PROPERTIES OF AN (AL2O3 PARTICLES)-(AL ALLOY 6061-T6) METAL-MATRIX COMPOSITE

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27119

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27119

題名:	HIGH-STRAIN RATE TENSILE PROPERTIES OF AN (AL2O3 PARTICLES)-(AL ALLOY 6061-T6) METAL-MATRIX COMPOSITE
作者:	PERNG,CC;HWANG,JR;DOONG,JL
貢獻者:	機械工程學系
關鍵詞:	N/A
日期:	1993
上傳時間:	2010-06-29 18:08:15 (UTC+8)
出版者:	中央大學
摘要:	The metal matrix composite materials consist of 10, 15 and 20 vol.% alumina particles in an aluminium alloy 6061-T6 matrix. Specimens were taken from hot-extruded rods and the tensile tests were carried out at various strain rates. High strain rate tests were performed by the split-Hopkinson-bar method. The fracture surfaces were observed with a scanning electron microscope to understand the fracture mechanisms. From the results, it can be concluded that: (1) the alumina-reinforced composites are more sensitive to strain rate than the unreinforced material. (2) the strain rate sensitivity of the ultimate tensile strength of these composites increases with increasing temperature and (3) the addition of alumina particles will reduce the ductility of aluminium alloy 6061-T6, irrespective of the strain rate and temperature.
關聯:	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
顯示於類別:	[機械工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	689	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing