TENSILE PROPERTIES OF LAMINATED COMPOSITES BASED ON ULTRAHIGH CARBON-STEEL

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/27155

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/27155

題名:	TENSILE PROPERTIES OF LAMINATED COMPOSITES BASED ON ULTRAHIGH CARBON-STEEL
作者:	SHYONG,L;WADSWORTH,J;SHERBY,OD
貢獻者:	機械工程學系
關鍵詞:	N/A
日期:	1991
上傳時間:	2010-06-29 18:09:09 (UTC+8)
出版者:	中央大學
摘要:	Laminated composites based on ultrahigh carbon steel (UHCS) have been prepared by roll bonding in three systems: UHCS/304 stainless steel, UHCS/Hadfield manganese steel, and UHCS/Fe-3% Si alloy. Tensile properties of these laminates were evaluated after various conditions of selective heat treatment. From these data, it is shown that the yield strength of the laminated composites follows the law of mixtures. The law of mixtures does predict the ductility of the laminated composites when the ductilities of the two components are similar, but does not predict the ductility for cases where the component ductilities are greatly dissimilar.
關聯:	JOURNAL OF COMPOSITE MATERIALS
顯示於類別:	[機械工程研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	387	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing