Optical and mechanical properties of AlF3 films produced by pulse magnetron sputtering of Al targets with CF4/O-2 gas

NCU Institutional Repository > 理學院 > 光電科學研究所 > 期刊論文 > Item 987654321/28123

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/28123

题名:	Optical and mechanical properties of AlF3 films produced by pulse magnetron sputtering of Al targets with CF4/O-2 gas
作者:	Liao,BH;Lee,CC;Jaing,CC;Liu,MC
贡献者:	光電科學研究所
关键词:	BEAM-ASSISTED DEPOSITION;THIN-FILMS;ULTRAVIOLET;COATINGS;MGF2;CONSTANTS;PLASMAS;LAF3;SIO2
日期:	2009
上传时间:	2010-06-29 19:42:05 (UTC+8)
出版者:	中央大學
摘要:	In this study, AlF3 thin films were deposited by pulse magnetron sputtering of Al targets with different ratios of CF4/O-2 gas and at different sputtering powers. The optical and mechanical properties of the AlF3 thin films were analyzed. The transmittance spectra showed no obvious negative inhomogeneous refractive indices. Denser films with a low optical absorption were obtained when high sputtering powers were used (larger than 30 W). The lowest extinction coefficient (7.3 x 10(-4) at 193 nm) of the films can be reached with 12 sccm O-2 flow rate and at 160W sputtering power. All of the residual stresses were compressive and their trends were consistent with the refractive indices. The lowest compressive stress (0.068 GPa) was obtained when the AlF3 films were prepared at 160W sputtering power.
關聯:	OPTICAL REVIEW
显示于类别:	[光電科學研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	466	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing