Influence of oxygen on some oxide films prepared by ion beam sputter deposition

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/28213

Title:	Influence of oxygen on some oxide films prepared by ion beam sputter deposition
Authors:	Lee,CC;Wei,DT;Hsu,JC;Shen,CH
Contributors:	光電科學研究所
Keywords:	THIN-FILMS;OPTICAL COATINGS;TITANIUM
Date:	1996
Issue Date:	2010-06-29 19:44:04 (UTC+8)
Publisher:	中央大學
Abstract:	Oxides of Ti, Zr, Si and Al were deposited by ion beam sputter deposition with a Kaufman-type ion source. The deposition rate, refractive index, extinction coefficient, and surface roughness of the oxide films are influenced by the partial pressure of oxygen. The surface morphology measured by an atomic force microscope shows that there is a certain range of optimum oxygen partial pressure which yields a smooth him of good optical quality. Baking makes the film surface rougher if the baking temperature is too high. The amount of oxygen supplied during the deposition can also influence the baking effect. Comparisons and explanations with existing literature are attempted.
Relation:	THIN SOLID FILMS
Appears in Collections:	[Graduate Institute of Optics and Photonics] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	558	View/Open

社群 sharing