Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric

NCUIR > Engineering College > Graduate Institute of Mechanical Engineering > journal & Dissertation > Item 987654321/30749

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/30749

题名:	Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric
作者:	Wu,KL;Yan,BH;Huang,FY;Chen,SC
贡献者:	機械工程研究所
关键词:	POWDER;EDM
日期:	2005
上传时间:	2010-07-06 16:26:31 (UTC+8)
出版者:	中央大學
摘要:	Electrical discharge machining (EDM) process is widely used to process hard materials in the industry. Electrical discharge distribution effects can be achieved by the addition of Al powder in the dielectric. A fine surface roughness value of the workpiec
關聯:	INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
显示于类别:	[Graduate Institute of Mechanical Engineering] journal & Dissertation

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	394	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing