中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/43462
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 78937/78937 (100%)
造访人次 : 39854184      在线人数 : 351
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/43462


    题名: 以化學水浴法製備氧化鋅光電極薄膜之研究;Production of ZnO Photoelectrode Thin Film by Chemical Bath Deposition Method
    作者: 徐彥翔;Yan-Shiang Shiu
    贡献者: 能源工程研究所
    关键词: 化學水浴沉積法;半導體薄膜;光電流密度;晶型結構;water-splitting;photoelectrochemical;photoelectrode;crystal structure;Zinc Oxide
    日期: 2010-07-15
    上传时间: 2010-12-08 13:40:32 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究探討氧化鋅(ZnO)半導體薄膜改變氨水濃度、沉積溫度、 熱處理氣氛及熱處理溫度,對薄膜成形性質、吸收率及光電流的影 響。以化學水浴法沉積法(CBD)於ITO 導電玻璃基材上進行鍍膜,來 製備光電極薄膜。利用光電化學原理於水溶液中吸收太陽能,並將其 解離成氫氣應用於氫能發電系統上。 本實驗探討不同氨水溶液濃度下對生成氧化鋅晶型結構之影 響,並比較在不同的晶型結構下,其晶型結構對穿透光譜及光電流性 質之影響。實驗結果發現,氨水濃度在1M、1.8M時,氧化鋅形成六 角柱型粗短及細長之晶型結構,氨水濃度在1.7M時,氧化鋅形成花 瓣狀之晶形結構。當其氨水濃度提升至10M時,而其氧化鋅半導體光 電特性在無施加偏壓下光電流密度可達到約0.17mA/cm2。進一步改 變沉積溫度、熱處理氣氛及熱處理溫度對薄膜沉積的影響;實驗結果 顯示,沉積溫度90℃、真空氣氛熱處理500℃下,氧化鋅薄膜之成膜 性質及吸收率最佳。 實驗結果亦顯示氧化鋅摻雜鎳後,其能隙值、吸收率及光電特性 的影響;在無施加偏壓下光電流密度約0.2mA/cm2。因此,化學水浴 法製備氧化鋅光電極乃成本低廉且製程簡易之方式。 關鍵字:半導體薄膜、化學水浴沉積法、晶型結構、光電流密度 In this study, zinc oxide (ZnO) thin film are formed under different working parameters, and their absorption and photocurrent effect are analyzed. ZnO thin films are deposited on ITO conductive glass substrate by chemical bath deposition (CBD), which is one of the most promising technique owing to its large-scale, cost-effective, environmental-benign and low-temperature advantages. By photoelectrochemical water-splitting, ZnO thin film can be used to produce H2. Firstly, different concentrations of ammonia solution are adapted to form zinc oxide thin film, and the resulting crystal structures are compared. It shows that ZnO particles have short and long hexagonal cylinder shapes at [NH3]=1 and1.8. The short hexagonal cylinder shapes was further transformed to a flower-like structure as ammonia increases to [NH3]=1.7. Experiments show that the photocurrent density of ZnO photoelectrode is nearly 0.17 mA/cm2 at 0 bias. The best forming properties of ZnO film occurs at [NH3]=10. By doping Ni into ZnO the effects on energy gap, absorption and photocurrent density of ZnO thin film is investigated. Photocurrent density of ZnO film is nearly 0.2 mA/cm2 at 0 bias. Therefore, producing ZnO photoelectrode by chemical bath deposition is proved to be a low-cost and simple method. Keyword: Zinc Oxide; crystal structure; photoelectrode; photoelectrochemical; water-splitting
    显示于类别:[能源工程研究所 ] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML2233检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明