骨釘骨板鎖固機構之冷焊現象; The phenomenon of cold welding in the Interlocking Mechanism between bone plate and bone screw

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/43499

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/43499

題名:	骨釘骨板鎖固機構之冷焊現象;The phenomenon of cold welding in the Interlocking Mechanism between bone plate and bone screw
作者:	吳建志;Jian-jhi Wu
貢獻者:	機械工程研究所
關鍵詞:	骨釘;骨板;冷焊;亂牙;近關節;periarticular;cross-threading;bone plate;bone screw;cold-welding
日期:	2010-07-12
上傳時間:	2010-12-08 13:42:48 (UTC+8)
出版者:	國立中央大學
摘要:	鈦合金骨釘骨板內鎖機構的冷焊(cold welding)問題是常常需要注意的情形。而亂牙(cross-threading)是造成需要強制破壞骨板以取出骨釘的主因之一。造成冷焊的力學指標是材料的塑性變形。造成塑性變形的幾項問題主因設計上的差異使骨釘的拉壓與剪切應力分佈的不同。本研究使用有限元素分析對骨釘骨板內鎖機構以Von Mises應力分析做初步的調查，分析四種不同介面的骨釘骨板機構之塑性變形情況。最後就植入後之骨板在人體內內部應力與變形狀態與文獻做比較。 The mechanical failure induced by the cold welding of the titanium-based material was one of the major concerns of the plate-screw system with the interlocking mechanism. One of the factors attributed to such the problem was the cross threading at the screw-plate junction. The cross threading was the interference between the threads of both screw and plate and then induced the plastic yielding. This study utilized the finite-element method to investigate the effect of the interlocking mechanism on the stress distribution at the screw-plate junction and to investigate the plastic deformation in four kinds of the interlocking mechanism. Finally, we compare the stress distribution and the state of deformation between bone plate which is computed by SolidWorks with the reference.
顯示於類別:	[機械工程研究所] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	782	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....