中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/48125
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78937/78937 (100%)
造訪人次 : 39854051      線上人數 : 227
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/48125


    題名: CCD 量測儀器之研究與探討;CCD Measurement Apparatus Design and Review
    作者: 劉大隆;TALUNG LIU
    貢獻者: 光電科學研究所碩士在職專班
    關鍵詞: 重複性;取樣定理;截止頻率;孔徑光闌;Isoplanatic condition;Repeatability;Sampling theorem;Cutoff frequency;Aperture Stop
    日期: 2011-08-29
    上傳時間: 2012-01-05 14:34:36 (UTC+8)
    摘要: 本論文目的是研發出可評判生產零件精確程度之CCD (Charge-coupled device)自動影像量測儀器,它適用於沖壓工廠與塑膠射出工廠量產時之抽驗設備,可以取代精密量測儀器,並降低生產成本。 在本研究的光學原理部份,我們將以傅立葉光學探討量測儀成像系統技術,而為了達成改良量測精確度的目標,我們針對各項關鍵元件與應用技術進行分析,包括:光源選擇與其傾斜度之校正、黑白和彩色CCD 成像精度的比較、量測儀之三軸精確度校正、儀器振動的抑制技術、環境溫度變化的監控與補償,以及最佳光圈數值與快門調整所得到的效果。 在成像精確度評估方式與改良技術部分,我們採用Gauge R&R (Gauge Repeatability and Reproducibility)來判定儀器量測精確度,並提出多項成像精確度的改善方法;在量測儀的校正與驗證方法上,我們將基於機構監控與補償技術,藉由光學校正與統計分析方式,以及SPC(Statistical process control)統計製程管制技術,作為量測精確度的判讀考量,最後再將經由本研究自動量測儀器量測的結果與國家級儀器量測所得到數據進行比較與分析。 The purpose of this study is to build up a CCD auto-measuring apparatus,which can be used as a sampling instrument for both press and plasticinjection factories. In the concern of the optical imaging system for our apparatus, Fourier optics plays as a key role. In order to improve the precision of the image measurement system in this study, several key components are introduced.Some technologies are also adopted to the measuring apparatus, including the light source selection, the imaging difference between monochromatic and colorful CCD cameras, fine-tuning of the precision for stepping stages, vibration depression of CCD apparatus, ambient temperature monitoring and compensation methods, optimized f-number, the temperature compensation of stage driving motors. In the concern of the precision evaluation for the CCD apparatus, the well-known Gauge R&R analysis is used. In the concern of the calibration and verification for the CCD apparatus, the SPC system was involved for product quality monitoring. Finally, we make the comparison of measurement data with that from national-standard apparatuses, including ITRI’s and Mithutoyo’s setup.
    顯示於類別:[光電科學研究所碩士在職專班 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML1438檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明