English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78937/78937 (100%)
造訪人次 : 39624505      線上人數 : 126
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/49873


    題名: Hydrogenation of p-Chloronitrobenzene on Tungsten-Modified NiCoB Catalyst
    作者: Zhao,B;Chou,CJ;Chen,YW
    貢獻者: 化學工程與材料工程學系
    日期: 2010
    上傳時間: 2012-03-27 16:25:13 (UTC+8)
    出版者: 國立中央大學
    摘要: NiCoB has been reported to be a good catalyst for the hydrogenation of p-chloronitrobenzene (p-CNB). However, it aggregates easily. In this study, a series of tungsten-modified NiCoB catalysts with various tungsten contents were synthesized by the chemical reduction method using NaBH(4) as the reducing agent. The products were characterized by X-ray diffraction (XRD), N(2) sorption, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The catalysts were tested for the liquid-phase hydrogenation of p-CNB. Ni, Co, W, and B were present in both elemental and oxidized states. The addition of tungsten could influence the surface composition of the catalyst. The electronic structures of Ni, Co, W, and B were also changed with changing content of tungsten. XPS showed that the elemental states of Ni, Co, W, and B formed an amorphous nanoalloy. The interactions of these species affected their electron densities and further influenced their catalytic activities. The tungsten oxide located among the NiCoB particles could act as a spacer that separates the NiCoB particles from their neighbors and inhibits aggregation. Compared to the unmodified NiCoB catalyst, the catalytic activity of tungsten-modified NiCoB exhibited an obvious increase, along with a slight decrease in the selectivity of p-chloroaniline (p-CAN). The differences in the atom radius and electronegativity of tungsten from those of the other elements in the alloy resulted in the formation of active sites for the catalytic reaction. The concentration of boron on the catalyst surface decreased with increasing tungsten concentration, which was responsible for the slight decrease in the selectivity of p-CAN. Considering the electronic effects, the structural effects, and the amount of B(3+) (Lewis acid), good catalytic performance in the hydrogenation of p-CNB was achieved by modifying the NiCoB catalysts with the proper amount of tungsten. Tungsten species not only acted as a spacer to prevent NiCoB particles from aggregating, but also donated partial electrons to Ni and Co. An overdose of tungsten would cover the surface of Ni and result in low activity.
    關聯: INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
    顯示於類別:[化學工程與材料工程學系 ] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML491檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明