Growth of bent carbon nanotubes by in-situ control of cantilever bending

NCU Institutional Repository > 工學院 > 材料科學與工程研究所 > 期刊論文 > Item 987654321/50015

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50015

题名:	Growth of bent carbon nanotubes by in-situ control of cantilever bending
作者:	Chen,IC;Wu,PJ;Lin,PY;Wang,YC;Chen,YH
贡献者:	材料科學與工程研究所
关键词:	CHEMICAL-VAPOR-DEPOSITION;FIELD-EMISSION PROPERTIES;SHEATH;NANOFIBRES;MICROSCOPE;ALIGNMENT;BEAMS;CVD
日期:	2011
上传时间:	2012-03-27 16:29:04 (UTC+8)
出版者:	國立中央大學
摘要:	A new and simple method for in-situ control of the growth direction of carbon nanotubes (CNTs) on cantilevers has been developed using plasma enhanced chemical vapor deposition (PECVD). Plasma-induced surface stresses in PECVD processes tend to cause bending of the cantilevers, which significantly changes the electric field distribution near the free-end of the cantilever. By adjusting the flow ratio of the feed gases during CNT growth, the degree of cantilever bending can be controlled due to the change in the plasma-induced surface stress, and in doing so manipulating the field line direction, as well as the growth direction of CNTs. Combining this in-situ tunable CNT growth technique with electron beam induced deposition of catalyst patterns, we have fabricated a bent CNT on a cantilever in one single, continuous deposition run. (C) 2011 Elsevier Ltd. All rights reserved.
關聯:	CARBON
显示于类别:	[材料科學與工程研究所 ] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	685	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing