The Influence of Injection Molding and Injection Compression Molding on Ultra-high Molecular Weight Polyethylene Polymer Microfabrication

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50270

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50270

题名:	The Influence of Injection Molding and Injection Compression Molding on Ultra-high Molecular Weight Polyethylene Polymer Microfabrication
作者:	Kuo,HC;Jeng,MC
贡献者:	機械工程學系
关键词:	TRIBOLOGICAL BEHAVIOR;REPLICATION;SIMULATION;UHMWPE;TRANSCRIPTION;FRICTION;FEATURES;SPEED;WEAR;FLOW
日期:	2011
上传时间:	2012-03-27 17:08:11 (UTC+8)
出版者:	國立中央大學
摘要:	The replication accuracy of ultra-high molecular weight polyethylene (UHMWPE) was investigated by using injection molding (IM) and injection compression molding (ICM). The mold insert was fabricated by using a stainless-steel etching method. Both the injection molded part and the injection compression molded part were observed under a microscope to compare the quality and accuracy of the replication. A high performance surface profiler was used to measure the microstructure profile. For the mold insert, the injection molded parts and injection compression molded parts were measured. The experimental results show that the UHMWPE can fill in microcavities by using IM and ICM technology. The height and shape of microstructure were influenced by the IM process parameters. For an injection molded part, the injection velocity was the most significant factor. This study also revealed that the ICM method was a more stable microstructure processing method than that of the IM. However, for better replication accuracy, both the IM and ICM processes require parametric optimization.
關聯:	INTERNATIONAL POLYMER PROCESSING
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	541	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....