Design and Implementation of Fuzzy Control on a Two-Wheel Inverted Pendulum

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/52046

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/52046

题名:	Design and Implementation of Fuzzy Control on a Two-Wheel Inverted Pendulum
作者:	Huang,CH;Wang,WJ;Chiu,CH
贡献者:	電機工程學系
关键词:	MOBILE ROBOT;TRAJECTORY TRACKING;FPGA;STABILIZATION;TRAILERS;VEHICLE;SYSTEMS;SCHEME
日期:	2011
上传时间:	2012-03-28 10:14:06 (UTC+8)
出版者:	國立中央大學
摘要:	This paper introduces the design and implementation of a two-wheel inverted pendulum (TWIP) system with a fuzzy control scheme and the system-on-a-programmable-chip (SoPC) technology. The control scheme includes three kinds of fuzzy controls which are the fuzzy balanced standing control (FBSC), the fuzzy traveling and position control (FTPC), and the fuzzy yaw steering control (FYSC). Based on the Takagi-Sugeno fuzzy model of the TWIP, the FBSC is a structure of a parallel distributed compensator solved by the linear matrix inequality approach. Based on the motion characteristic of the TWIP, the FTPC and the FYSC are designed with Mamdani architecture if-then rules. Furthermore, the fuzzy control scheme for the real TWIP is implemented into an SoPC development board with an embedded reduced-instruction-set-computer soft-core processor and user intellectual property modules. Both the computer simulations and practical experiments demonstrate the effectiveness of the proposed control scheme.
關聯:	IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
显示于类别:	[電機工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	366	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing