English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 40250256      線上人數 : 149
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/61549


    題名: 以光激發螢光預測晶圓製成太陽能電池之效率;Photoluminescence in solar cell efficiency prediction in wafer procedure
    作者: 杜羿嶢;Du,Yi-Yao
    貢獻者: 照明與顯示科技研究所
    關鍵詞: 太陽能電池;效率預測;solar cell;efficiency prediction
    日期: 2013-08-29
    上傳時間: 2013-10-08 15:21:45 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究使用光激發螢光影像技術,建立圖像演算以及連結微觀載子行為至宏觀電性行為,也成功以晶圓螢光影像達到太陽能電池效率之預測。原始晶圓螢光影像經過圖像演算法後其螢光影像與濕清洗螢光影像之SSIM值從0.5461提升至0.6205。最終本研究針對357片晶圓影像作效率預測,與實際製成太陽能電池所量測效率之對應相關係數也高達0.6762。
    The article utilizes photoluminescence(PL) imaging technology and successfully links macroscopic and microscopic phenomena. Solar cell efficiency prediction in as-cut wafer process with the help of photoluminescence is obtained. The SSIM values of as-cut wafer PL image and after calculated to wet-clean PL image raise from 0.5461 to 0.6205. 357 pieces solar cell procedure are utilized to confirm the method in this article. Correlation of predicted efficiency in as-cut wafer process and real efficiency in solar cell process is 0.6762.
    顯示於類別:[照明與顯示科技研究所 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML1040檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明