不等高橋墩隔震橋梁隔震支承勁度與黏滯阻尼器配置之最佳化設計研究;Simultaneous Optimization of Isolators' Stiffnesses and Viscous Dampers' Coefficients for Seismic Response Mitigation of Bridge Structures with Columns of Irregular Heights

NCU Institutional Repository > 工學院 > 土木工程學系 > 研究計畫 > Item 987654321/62182

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/62182

题名:	不等高橋墩隔震橋梁隔震支承勁度與黏滯阻尼器配置之最佳化設計研究;Simultaneous Optimization of Isolators' Stiffnesses and Viscous Dampers' Coefficients for Seismic Response Mitigation of Bridge Structures with Columns of Irregular Heights
作者:	莊德興
贡献者:	國立中央大學土木工程學系
关键词:	土木水利工程
日期:	2012-12-01
上传时间:	2014-03-17 11:18:49 (UTC+8)
出版者:	行政院國家科學委員會
摘要:	研究期間：10108~10207;The isolation systems have been extensively adopted in bridges to mitigate the induced seismic force. However, the deck displacements of isolated bridges may become excessively large under extreme ground motions. Although the installation of supplemental damping devices can mitigate the seismic responses of isolated bridges, the columns may subject to extra forces induced by the supplemental dampers so that the displacements of columns and bearings may increase under strong earthquakes if the bearings and the supplemental dampers are not properly designed. Furthermore, the seismic responses of isolated bridges with columns of irregular heights are very complicate due to the irregular distribution of column stiffness. For effectively mitigating the seismic responses of the bridges with columns of irregular height, the bearings and supplemental dampers should be designed simultaneously. Consequently, the objective of this research is to develop an optimal design methodology for designing appropriate damping coefficients and locations for viscous dampers and stiffness for bearings simultaneously for isolated bridges. The isolated bridges with columns of irregular heights will be focused in this study. During the analysis, the deck is considered to be rigid, and resisting forces of all structural members, including rubber bearings and columns, are assumed to exhibit perfect elastic-plastic behavior. The nonlinear restoring forces of the isolators and columns are simulated by the Bouc-Wen hysteresis model. The hybrid meta-heuristic searching algorithm adopted in this research is a method combing particle swan optimization (PSO) and simulated annealing (SA) named as PSO-SA method. The optimal combination of damping coefficients for the viscous dampers and stiffness for bearings installed on irregular isolated bridges will be designed for near field and far field ground motions, respectively. The validity of the proposed design methodology and the efficiency in mitigating the seismic response of the irregular isolated bridges when the optimal designed dampers and bearings are adopted will then be discussed.
關聯:	財團法人國家實驗研究院科技政策研究與資訊中心
显示于类别:	[土木工程學系 ] 研究計畫

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	362	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....