橋梁動態載重識別之模態函數法;Dynamic Loadings Identification of Bridge by the Modal Function Method

NCU Institutional Repository > 工學院 > 土木工程研究所 > 博碩士論文 > Item 987654321/64927

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/64927

题名:	橋梁動態載重識別之模態函數法;Dynamic Loadings Identification of Bridge by the Modal Function Method
作者:	劉傳騰;Liu,Chuan-Teng
贡献者:	土木工程學系
关键词:	模態法;狀態空間系統;Tikhonov正規化;動態規劃;modal method;state space system;Tikhonov regularislation;Dynamic programming
日期:	2014-07-31
上传时间:	2014-10-15 14:34:15 (UTC+8)
出版者:	國立中央大學
摘要:	車輛超載容易對公路或橋梁結構等交通設施產生破壞，尤其對於某些交通量大的重要公路或橋梁更顯得重要，基於運輸安全的重要性，因此衍生出許多車輛載重識別(Weigh-In-Motion)的方法，其中一種研究車輛與橋梁之間的力學互制關係，稱之為橋梁動態載重識別方法(Bridge Weigh-In-Motion)，此方法主要利用橋梁的力學反應之應變值來識別出通過之車輛總重及軸重。本研究主要是利用結構動力方程式做為基礎，並將所分析之橋梁有限元素化，推導出自由度與應變之間的關係，並利用模態的觀念，將自由度展開成模態振形(mode shape)乘上廣義座標，此方法減少反算程式在迭代求解的所耗費的大量計算時間，並可將所量測到的應變值做一個即時(Real-time)分析的應用。藉由引入線性離散時間系統(Linear Discrete-Time System)裡面的狀態空間系統(State-Space System)和在線性代數中求解近似值的一種方法為直接正規化法，如Tikhonov正規化，並利用動態規劃(Dynamic Programming)演算法迭代進行反算求解出橋梁上的移動載重。橋梁結構數值模擬是利用有限元素法來分析，從二維梁元素模型，到三維梁元素模擬，驗證此動態反算理論利用模態函數法識別載重之準確度，並考量其他因素例如車速，應變計數量等對於載重識別結果之影響探討。 ;Overloaded vehicles are prone to produce damage on the road or the bridge structures,especially for the high traffic flow in the important roads or bridges, Based on the importance of transportation safety, many vehicles load identification method (Weigh-In-Motion) are reported recently.One study of the mechanical interaction between the vehicle and the bridge, called the bridge of dynamic load identification methods (Bridge Weigh-In-Motion), the main advantage of this method is using the mechanical strain response of bridges to identify the vehicle′s total weight by and axle load. This study is based on the equations of dynamic structures and derive the relationship equations between the degree of freedoms and the strains by discretizing the bridge object.and the degree of freedom can be expanded into the modal shape multiplied by the generalized coordinate by using the modal method. This method can reduce a lot of computing time in the inverse program and can make it to be an immediate (Real-time) analysis of the application. Numerical simulation of the bridge structure is analyzed using the finite element method, from the two-dimensional beam element model to simulate three-dimensional beam elements. To verify the accuracy of the inverse problem by the modal method and to consider influence of the load identification the factors like speed and the number of the strain.
显示于类别:	[土木工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	488	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....