中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/65516
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 80990/80990 (100%)
造访人次 : 41265910      在线人数 : 883
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/65516


    题名: 正交分頻多重接取系統之峰值平均功率降低技術比較;Comparisons of Orthogonal Frequency Division Multiple Access System Peak to Average Power Reduction Techniques
    作者: 郭登福;Kuo,Teng-Fu
    贡献者: 通訊工程學系在職專班
    关键词: 正交分頻多重接取系統;OFDMA
    日期: 2014-07-14
    上传时间: 2014-10-15 17:02:29 (UTC+8)
    出版者: 國立中央大學
    摘要: 本論文主要目的,由正交分頻多重接取系統(Orthogonal Frequency Division Multiple Access,OFDMA)所演變至今的單載波分頻多重存取(Single carrier frequency division multiple access, SC-FDMA )系統技術中的區域式分頻多重存取(L-FDMA)載波映射系統,進行峰值對平均功率比(PAPR)降低及比較。所採用是截波(Clipping)技術[7]及擴壓(Companding)技術[8],並且於IEEE 802.16所提出之SUI(Stanford University Interim)通道模型的中的SUI-3通道模型與另一個國際電信聯盟無線電通信組(ITU)無線通道中的低速通道(Pedestrian A)與高速通道(Vehicular A)進行通道模擬,確認峰值對平均功率比(PAPR)降低後的BER(Bit Error Rate)效能影響狀況。由模擬結果指出,於LFDMA系統下分別僅單獨加入截波技術與擴壓技術後,PAPR僅有降低約1dB左右。但結合兩者技術後,於QPSK調變下的模擬結果,PAPR約可降低至4.8dB,較原系統的7.5dB的PAPR還低約2.7dB左右。而在16QAM的調變下,PAPR約可降低至5.1dB,較原系統的8.2dB的PAPR還低約3.1dB左右。進而比較於OFDMA系統使用QPSK調變系統下,可降低至6dB左右的PAPR,較原系統的10.2dB的PAPR還低約4.2dB。且於各個通道效能模擬表現下,加入PAPR降低的技術後,可擁有與原系統類似的BER,並不會造成原系統效能大幅降低。
    ;The main purpose of this thesis is to investigate the PAPR reduction comparison for the evolved localized (LFDMA) subcarrier mapping of the OFDMA technology, SC-FDMA. Clipping and Companding are used as the PAPR reduction technique. The channel models used in the simulation are SUI-3 channel model of IEEE 802.16 SUI proposed along with the ITU channel models in the low-speed channel(Pedestrian A) and high-speed channel (Vehicular A). The simulation are conducted to reveal BER performance under the conditions with the PAPR reduction techniques. As indicated by the simulation results, under the LFDMA systems, there is about 1 dB PAPR reduction by using either Clipping technology or Companding technology separately. If the combination of the two technologies is employed, PAPR can be reduced to be approximately 4.8dB in the simulation under QPSK modulation. Compared with the PAPR of the original system(7.5dB), it is reduced by about 2.7dB. In the 16QAM modulation under, PAPR can be reduced to be about 5.1dB. Compared with the original system (8.2dB), it is reduced by about 3.1dB. Then, we make comparison in OFDMA systems by using QPSK modulation, PAPR can be reduced to be about 6dB. Compared with the original system(10.2dB), it is reduced by about 4.2dB. As revealed in the performance curves, adding PAPR reduction techniques have the similar BERs of the original systems, and will not cause significant reduction of the original system performance.
    显示于类别:[通訊工程學系碩士在職專班 ] 博碩士論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML608检视/开启


    在NCUIR中所有的数据项都受到原著作权保护.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明