中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/65909
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41268772      線上人數 : 85
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/65909


    題名: 迴轉式壓縮機泵浦吐出口閥片厚度對性能影響之研究;The Influence of the thickness of pump discharge valve on the performance of Rotary Compressor
    作者: 黃克倫;Huang,Ke-lun
    貢獻者: 機械工程學系在職專班
    關鍵詞: 迴轉式壓縮機;R410A冷媒;吐出口閥片;rotary compressor;R410A refrigerant;discharge valve
    日期: 2014-07-18
    上傳時間: 2014-10-15 17:17:47 (UTC+8)
    出版者: 國立中央大學
    摘要: 本研究利用R410A冷媒所對應的莫利爾曲線,求得壓縮機在不同工作參數下,所對應理論吸入、吐出之溫度與壓力,再由冷媒的熱力性質,求得腔室內每曲軸角度對應不同的體積下,造成腔室內的壓力變化。

    再使用ANSYS軟體來模擬迴轉式壓縮機運轉過程閥片位移,利用閥片的材料機械性質(密度、楊式係數、蒲松比),和固定上支座各零件組合幾何,藉由改變閥片厚度參數,求得瞬時壓縮腔室吐出口閥片內外部之壓力所對應不同閥片位移量與壓縮機性能之影響。

    模擬結果顯示,相同壓力下之0.305mm閥片位移量較0.25mm低4.1%,因位移減少,閥片閉合時,高壓端逆流減少,使得效率提升。經實驗驗證,性能測試結果0.305mm閥片提升EER能量效率比
    (Energy Efficiency Ratio)1.8%;本研究藉由模擬可合理的解釋實驗結果。
    ;Mollier chart of R410A refrigerant is used to obtain the corresponding theoretical suction temperatures, discharge temperatures, densities and pressures at different working
    conditions. Then the corresponding volumes and pressures at different crank angles are calculated based on its thermodynamic properties.

    ANSYS is used to simulate the valve displacement of the rotary compressor under different operation processes. Under the fix of valve material mechanical properties (density, Young′s modulus and Poisson′s ratio) and top flange parts, by changing the valve thickness only, the instantaneous valve displacement and the compressor performance caused by the difference between internal and external pressures of the compressor chamber.

    Simulation shows that the displacement of 0.305mm valve is lower by 4.1% compared with that of 0.25mm valve under the same pressure loading. The experimental test verifies that 0.305mm valve increases the energy efficiency ratio EER (Energy Efficiency Ratio) by 1.8%. The simulated and experimental results are consistent each other.
    顯示於類別:[機械工程學系碩士在職專班 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML655檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明