中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/6688
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41258347      線上人數 : 81
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/6688


    題名: X光波域光學薄膜之研究;The Research of Optical Thin Film in the X-Ray Region
    作者: 鄭光珮;Kung-Pei Cheng
    貢獻者: 光電科學研究所
    關鍵詞: X 光;光 學 薄 膜;粗糙度;Optical Thin Film;X-ray
    日期: 2002-06-14
    上傳時間: 2009-09-22 10:25:53 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 本論文研究軟X光區域的多層膜高反射鏡及使用銅靶 輻射量測X光反射率,檢測多層膜結構。 關於13.6nm的近垂直入射多層膜高反射鏡,可優化出高反射率的膜層結構。經優化53層鉬矽多層膜,鉬和矽的膜層厚度分別為3.03nm和4.07nm,對S偏振光而言,四分之一波膜堆的理想反射率為69.42%,我們優化後週期性膜堆的理想反射率為72.12%。對p偏振光而言,四分之一波膜堆的理想反射率為65.97%,我們優化後週期性膜堆的理想反射率為69.36%。 由於近垂直入射多層膜高反射鏡對膜厚及粗糙度的要求甚高,因此使用離子束濺鍍法製鍍出非晶態薄膜,藉著銅靶 輻射以掠角入射薄膜,根據Kiessig干涉條紋精準的求得薄膜的特性,包括薄膜密度、消光係數、厚度及各界面粗糙度。求得的結果與原子力顯微鏡比較,並非完全吻合。主要的原因為X光量測的範圍較大,因此提供的訊息是平均值,且包含高頻波。而原子力顯微鏡量測的範圍是局部性,且濾掉高頻波。 The paper is discussed about designing the nearly normal incident multilayer mirrors in the X-Ray region and analyzing the multilayer based on measuring X-Ray reflectivity . For the nearly normal incident multilayer mirrors at 13.6 nm , our program can optimize the structure of the high–reflectivity mirrors . After optimizing the 53 layers Mo/Si mirrors , we can find out that the thickness of the Mo and Si thin film are 3.03nm and 4.07nm . For s-pol. , the reflectivity of the quarter wave stick is 69.42% , and the reflectivity of our design is 72.12% . For p-pol. , the reflectivity of the quarter wave stick is 65.97% , and the reflectivity of our design is 69.36% . It is important for the thickness mistakes and roughness of nearly normal incident multialyer mirrors . We manufacture the amorphous thin film by using ion beam sputtering deposition , and obtain the characteristics of the multilayers by measuring the X-Ray reflectivity of radiation of Cu target , for example the mass density , extinction coefficient , thickness of the thin film and the roughness of the interface . Generally speaking , the roughnesses by fitting X-Ray reflectivity are different from the roughnesses of using AFM . This result is that the area by X-Ray illuminated is larger than by AFM measuring , and X-Ray reflectivity contains the data of high frequency waves.
    顯示於類別:[光電科學研究所] 博碩士論文

    文件中的檔案:

    檔案 大小格式瀏覽次數


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明