以低溫電漿輔助化學氣相沉積TEOS SiO2薄膜之 應力特性研究;Investigation of the low stress TEOS SiO2 films by low temperature PECVD processing

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/68270

Title:	以低溫電漿輔助化學氣相沉積TEOS SiO2薄膜之應力特性研究;Investigation of the low stress TEOS SiO2 films by low temperature PECVD processing
Authors:	黃郁庭;Huang,Yu-Ting
Contributors:	光電科學與工程學系
Keywords:	矽酸四乙酯(TEOS);電漿輔助化學氣相沉積製程;Tetraethyl orthosilicate (TEOS), PECVD processes
Date:	2015-07-13
Issue Date:	2015-09-23 11:14:09 (UTC+8)
Publisher:	國立中央大學
Abstract:	以矽酸四乙酯(TEOS)材料在低溫的電漿輔助化學氣相沉積法成長出具有高密度和低應力的SiO2薄膜。針對幾項製程參數包括鍍膜壓力、氧氣流量、TEOS 流量、高低射頻的功率及沉積溫度等進行調整並且分析製鍍薄膜的品質。實驗結果顯示，當沉積速率提高時，薄膜的密度將會變低，而較低密度的薄膜會造成低的薄膜應力。我們發現TEOS SiO2薄膜的應力與薄膜密度及沉積速率有很大的相關性，在調整鍍膜壓力、氧氣流量、TEOS 流量... 等參數下，會使SiO2 薄膜沉積速率、應力及密度有較明顯的變化。最後我們依照實驗結果找出最佳的鍍膜條件:為沉積壓力約在4torr、 TEOS 與O2當量比在8.1%、鍍膜溫度在200oC 的條件下，所備製出的TEOS SiO2 薄膜具有高密度以及低應力的薄膜品質，其薄膜的沉積速率約41±2.0Å/sec ,其蝕刻速率約在1100±55Å/sec。且控制應力值約為300±20Mpa 的壓應力薄膜。;Tetra-ethyl-ortho-silicate (TEOS) SiO2 thin films were deposited using low temperature Plasma-enhanced chemical vapor deposition (PECVD) to achieve the performances of low stress and high density. Several process parameters including working pressure, O2 flow rate, TEOS flow rate, high and low frequency power rates, and working temperatures were adjusted to analyze the quality of the films. The results show when the deposition rate is high, the density of the film is low. And the lower density of the film will affect the lower stress. We found out the stress of TEOS SiO2 film has strong correlation by the high film density and slow deposit rates. The working pressure, O2 flow and TEOS flow rate can play important roles for the stress and density of the TEOS SiO2 films. Finally, we found out the high film density and low stress conditions keep the deposition pressure at 4torr, TEOS / O2 ratio at 8.1% and working temperature at 200 degrees. The deposition rate was about 41±2.0Å/sec. the etching rate was about 1100±55Å/sec.The stress of the SiO2 film was compressive and the stress value range was at 300±20Mpa.
Appears in Collections:	[Graduate Institute of Optics and Photonics] Electronic Thesis & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	1010	View/Open

社群 sharing

Loading...