中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/72464
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41255918      線上人數 : 135
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/72464


    題名: 超音波影像輔助HIFU系統之聚焦點位置校準
    作者: 王克文;Wang,Ke-Wun
    貢獻者: 機械工程學系
    關鍵詞: 高強度聚焦超音波;超音波導引;機械手臂;聚焦點;High intensity focused ultrasound;Ultrasound guided;Robot;Focus point
    日期: 2016-08-25
    上傳時間: 2016-10-13 14:57:57 (UTC+8)
    出版者: 國立中央大學
    摘要: 高強度聚焦超音波(High Intensity Focused Ultrasound, HIFU)為熱治療手術方式之一,相較於傳統手術,其有無輻射、出血量少與非侵入性等優點,目前在前列腺、乳癌、肝臟等腫瘤治療上都有其應用,且對於血腦障壁的開啟及微氣泡藥物釋放等都有功效。HIFU燒灼治療主要的作用機制是以機械效應和熱效應在生物體內產生高溫,使目標處的細胞產生凝固性的壞死,然而HIFU換能器的聚焦點會因元件設計或製造的不夠精準或導引系統的定位誤差而有所偏移,導致在使用時會無法準確聚焦在選定的位置上。本研究藉由機械手臂控制HIFU換能器分別沿三個相互垂直的路徑來回移動並進行燒灼,同時以熱電偶量測燒灼溫度,由所得的兩條溫度-位置曲線的交點找視為HIFU換能器真正的聚焦點位置,並將此校正後的聚焦點位置應用在超音波影像導引HIFU燒灼定位系統。實驗以NIPAM-52水膠做為校正用的仿體,取其可逆的特性使同路徑的來回燒灼條件一致。實驗結果顯示由定位探針點選的熱電偶位置與以機械手臂移動HIFU換能器的燒灼聚焦點位置距離誤差在1 mm 以下。同樣方式的實驗也應用在豬里肌肉的燒灼,結果顯示在2秒內燒灼區可升溫至攝氏80度,達到使細胞壞死的功效。;HIFU(High-Intensity Focused Ultrasound) treatment is a kind of thermal treatment procedures. Comparing to conventional surgical treatment, HIFU treatment has lots of advantages such as radiation-free, less bleeding and noninvasiveness. Currently, HIFU has been applied in tumor treatments such as prostate, breast, and liver tumors. It is also used in the disruption of the blood-brain barrier and microbubble drug delivery. The main mechanisms of HIFU ablation treatment involve mechanical and thermal effect, which can generate high temperature to heat and destroy target cells. However, its position of focal point may not be accurate during ablation positioning because the design or manufacturing of system components are not accurate enough and inaccurate positioning of the robotic HIFU positioning system. In this study, we find the real focal point of a HIFU transducer by moving the HIFU transducer controlled by a robot manipulator to ablate an phantom along three orthogonal paths back and forth. A thermal couple is used to detect ablation temperature at the same time. Then the intersection of the two temperature-position curves obtained during the back and forth movement along the same path is defined as the focus point position of the HIFU transducer, which is used to position the HIFU transducer for an ultrasound assisted robotic positioning system. In the experiment, NIPAM-based hydrogel phantoms are used because of its reusable property of quick recovery from HIFU ablation. The experimental results shown that the distance between the target tip point position of a thermal couple measured by a positioning detector and the ablation focus point of a HIFU transducer controlled by a ultrasound assisted robotic positioning system is less than 1 mm. Similar experimental procedures are applied to ablate pig loin tissue. The temperature of ablation area raises to 80 degrees Celsius in two minutes, which is high enough to destroy tissue cells.
    顯示於類別:[機械工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML440檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明