A4032與鑄/鍛Al-1.2Mg-1Si-1Cu合金的機械性質與磨耗特性研究

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/75109

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/75109

题名:	A4032與鑄/鍛Al-1.2Mg-1Si-1Cu合金的機械性質與磨耗特性研究
作者:	鄭偉諒;Cheng, Wei-Liang
贡献者:	機械工程學系
关键词:	鑄造/鍛造成型法;高溫機械性質;磨耗;Cast/Forging process;High temperature tensile properties;Wear
日期:	2017-08-22
上传时间:	2017-10-27 16:20:49 (UTC+8)
出版者:	國立中央大學
摘要:	本研究應用鑄造/鍛造成型法生產Al-Mg-Si-Cu合金，並對該合金取代商用渦卷材料A4032的可能性做出初步評估。渦卷的成型受到外型限制難以適用多數的加工法，過去的研究指出，擠型材搭配鍛造成型渦卷的方法得以商用化，而擠型材的尺寸穩定性不佳及高生產成本，使該製程存在改善空間。鑄/鍛件可以彌補上述的缺點，根據過去的成果，鑄造/鍛造成型的Al-1.2Mg-1.0Si-1.0Cu合金可得到媲美擠型材的機械性質，因此本研究將對鑄造/鍛造成型的Al-1.2Mg-1.0Si-1.0Cu合金與商用的渦卷材料A4032合金進行各項性質的比較，並探討該合金成為渦卷材料的適用性。本研究共採用三組材料進行測試，分別為自行調配成份之Al-1.2Mg-1.0Si-1.0Cu合金、商用A4032 Billet及A4032擠型材，三組材料經過常溫鍛造成型及T6處理後，車製成拉伸試棒，確認材料的常溫拉伸性質達規範要求，才進行後續測試。後續的材料性質測試包括：(1)高溫(200C、350C)拉伸性質、硬度測試；(2)熱膨脹係數測試；(3)磨耗測試。測試結果顯示，鑄造/鍛造成型之Al-1.2Mg-1.0Si-1.0Cu合金在各測試溫度下，皆能得到接近或是優於A4032合金的機械性質，且耐磨耗能力優於A4032擠型材。;Cast/Forging process was used to produce the Al-Mg-Si-Cu alloy in this study. The experimental results were assessed for replacing the commercial alloy AA4032, which was extensively used for making scroll. Though the extruded bar had been widely used in industry, it still has some disadvantages; including cost issue and dimensional stability due to elongated grains. The topic of searching for better material/processes is still open for researchers because the scroll possesses complex shape that is difficult to be fabricated by machining and/or by other processes. The cast/forged Al-1.2Mg-1.0Si-1.0Cu alloy was studied to understand that this alloy can produce adequate mechanical properties to approach AA4032 alloy. This study intends to evaluate the mechanical properties at different temperatures and wear behavior between the extruded A4032 and cast/forge Al-1.2Mg-1.0Si-1.0Cu alloy. The base materials used in this study including Al-1.2Mg-1.0Si-1.0Cu alloy, A4032 Billet and extruded A4032 bar. The material cubes or bars were prepare to run one pass cold forging by open die with 30-60 % reduction. The samples were removed for running T6 heat treatment. The heat treated samples then machined to be tensile test bars and then tested by tensile testing machine. Tensile properties at RT, 200C and 350C were obtained and analyses. Parts of samples were also prepared for running thermal expansion coefficient test and wear test. Experimental results indicated that the cast/Forged Al-1.2Mg-1.0Si-1.0Cu alloy produced superior tensile strength to other AA4032 sample and yielded appropriate wear resistance comparing with AA4032 alloy.
显示于类别:	[機械工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	284	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....